SG-3100 Upgrade failed 23.01 to 23.05

s0m3f00l

I tried it today from console on the SG-3100 and got the following:

0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + Netgate pfSense Plus tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 13

Your Netgate device has pfSense+ as part of your device purchase.
>>> Updating repositories metadata...
Updating pfSense-core repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: . done
Processing entries: . done
pfSense-core repository update completed. 7 packages processed.
Updating pfSense repository catalogue...
Fetching meta.conf: . done
Fetching packagesite.pkg: .......... done
Processing entries:
Processing entries............. done
pfSense repository update completed. 515 packages processed.
All repositories are up to date.
>>> Upgrading pfSense-upgrade... done.
Segmentation fault (core dumped)
failed to update the repository settings!!!
failed to update the repository settings!!!
Netgate 3100 - Serial:  *OUTPUT OMITTED* - Netgate Device ID:  *OUTPUT OMITTED*

Then after reboot:


*** Welcome to Netgate pfSense Plus 23.01-RELEASE (arm) on pfSense_Edge ***

 WAN (wan)       -> mvneta2    -> v4: *OUTPUT OMITTED*
 LAN (lan)       -> mvneta1    -> v4: *OUTPUT OMITTED*
                                  v6: *OUTPUT OMITTED*
 OPT1 (opt1)     -> mvneta0    ->
 IOT_Devices_VLAN10 (opt2) -> mvneta1.10 -> v4: *OUTPUT OMITTED*
 Management (opt3) -> mvneta1.7  -> *OUTPUT OMITTED*
 AccessVLAN (opt4) -> mvneta1.8  ->
 WANv6 (opt5)    -> gif0       -> v6: *OUTPUT OMITTED*
 TUN2WireGuard (opt6) -> tun_wg0    -> v4: *OUTPUT OMITTED*

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + Netgate pfSense Plus tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Disable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 13 

Segmentation fault (core dumped)
failed to update the repository settings!!!
failed to update the repository settings!!!

Not sure what I should try next. Is this what everyone else saw on failures?

SteveITS

@s0m3f00l Usually others have seen a certificate error. Does it still show 23.05 is available? If not try
https://docs.netgate.com/pfsense/en/latest/troubleshooting/upgrades.html#upgrade-not-offered-library-errors

s0m3f00l

@SteveITS No I still see the update to 23.05 as available.

crgbt

@s0m3f00l

This is exactly the same error I get on my SG-3100 when trying to update via the CLI, although I never got as far as you did trying to apply the update.

If you try via the Web GUI, do you get the ‘another instance’ error?

FYI, there’s a thread for that error here: https://forum.netgate.com/topic/179393/another-instance-of-pfsense-upgrade-is-running-try-again-later/9

s0m3f00l

@crgbt That thread helped me fix it. Thanks everyone.