The modem is not responding to "AT" at ModemCmd: label.
-
Hello guys
I'm trying to set up a 4G chip on my hardware. I follow the step by step available on the Netgate website, but it doesn't work. I don't know where to run!
An important detail is that my hardware is not available in the list of "Known Working 3G-4G Modems" available at https://docs.netgate.com/pfsense/en/latest/cellular/hardware.html
The error message in /var/log/ppp.log is this one that reads "CHAT: The modem is not responding to "AT" at ModemCmd: label.".
Thanks for any help..
Thanks -
PC Engines APU3/APU4 with 4g/3g/LTE module
LTE troubleshooting on pfSense
PC Engines APU boards related, but you will be
getting out also something for you, I hope so. -
What modem are you using? In what device?
Steve
-
Hello guys,
@Dobby_ thanks for the help!
@stephenw10 is not a modem specifically. After reading the posts that the friend mentioned here, I realized that I would have to have an antenna for the chip to work. It seemed so obvious, didn't it?
The equipment is an Elsky j19e4l-j1900 mini-itx board
http://en.miniboard.cn/wap/product/?28_100.html
https://portuguese.alibaba.com/product-detail/ELSKY-Mini-Itx-Firewall-mini-board-1600565715255.html -
I'm trying to use a wireless card as an "antenna".
Tested with an Askey WLL3140-D4
Model no. AR5BXB61 (AR5006EG Mini PCIe reference) -
My biggest question is:
How to find out what the init string is? -
Nothing you have listed there appears to be a modem. So there is no 'init string'.
Are you trying to setup WIFI?
-
@gusIT said in The modem is not responding to "AT" at ModemCmd: label.:
I realized that I would have to have an antenna for the chip to work. It seemed so obvious, didn't it?
For any card such WiFi (Wireless LAN) or LTE (Modem)
you will need even a qualified antenna, that is matching
to that hardware. And on top of all you may need the
right antenna matching the right "standard" (miniPCIe or M.2).Antennas for M.2 hardware are different from the antennas
for miniPCIe hardware, this is important because they are
grounding the cards and work well only the right MHF
standard was chosen.The equipment is an Elsky j19e4l-j1900 mini-itx board
http://en.miniboard.cn/wap/product/?28_100.html
https://portuguese.alibaba.com/product-detail/ELSKY-Mini-Itx-Firewall-mini-board-1600565715255.htmlThe mainboard is ok.
The card is an miniPCIe WiFi card and not a modem.
Be careful connecting and empower the card, without
connecting any antenna right on.This card here is a modem called Sierra Wireless MC7710
-
@Dobby_ I think I understand!
I need a miniPCIe modem, not just any miniPCIe card.
I'm going to buy a miniPCIe modem and do new tests!
And what about the init string, how do I find out the specific one for the modem I use? -
Most modems will work with the included default string.
-
@gusIT said in The modem is not responding to "AT" at ModemCmd: label.:
And what about the init string, how do I find out the specific one for the modem I use?
If you go into troubles you may need it or let us say another
then the "default" one. -
Thanks a lot for the help gentlemen!
