No internet on Guest LAN
-
@stephenkwabena said in No internet on Guest LAN:
I have upgraded to pfsense 2.7.0-BETA, when I added a new interface for Guest's or hotspot, there is no internet on that LAN.
Below are my configurationHow many times are you gonna post the exact same problem in different threads??
-
@Jarhead I'm sorry for posting in different threads and promise it will not repeat itself again
-
@stephenkwabena click on the the numbers next to the acl in your photo they show 203, it will show active states look at what they are doing.
-
@JonathanLee said in No internet on Guest LAN:
click on the the numbers next to the acl in your photo they show 203
Great tip! This will limit the states to the ones created per that rule.. But, with that we won't be able to see the nat state that shows that it was changed to the public IP on the wan..
It would good to see that the traffic was actually natted to his public ip in the state table - because if its not, then that could be his reason he is not able to actually connect to anything.
When I click on mine for example - it shows the states by the rule id "303" in my example - but it doesn't show the WAN state where see that it was natted to my wan IP..
-
@stephenkwabena Check what interfaces you have approved to use the DNS resolver also
(Example DNS Resolver)This should include your loopback and your new interface as a selected item under network interface
-
@JonathanLee I checked "All" but I have noticed something else, sometimes I can browse for sometime then I can't browse again
-
Do the created states differ when it fails?
-
@stephenkwabena said in No internet on Guest LAN:
sometimes I can browse for sometime then I can't browse again
most likely because your dns is failing.. you showed on one of your many posts timing out trying ping google on the resolve of google.com if you can not resolve whatever.domain.tld to an IP - then no your not going to be able to "browse" the internet.
-
@stephenw10 said in No internet on Guest LAN:
Do the created states differ when it fails?
Yes nothing shows at the states but when able to browse I can see "10.10.5.10 established 222.678.145.233 (something like this)"
-
@stephenkwabena yeah that would mean its working - if you can not resolve www.google.com for example then no you would never create a state..
When you can not browse - validate that you can resolve the fqdn your trying to go to. If not then no its never going to work, if you get an IP for the fqdn your trying to go to. Then check you states.. If you see say syn sent, but no answer then were you trying to go didn't answer and problem is upstream, etc.
