2100 LED question

jrey

I have a VM that runs it so I could play with it

Cool I have and old DEC PDP emulator that I fire up from time to time just to perform a memory test (that is my memory - how much can I remember)

have fun with the lights. (like your "night before" re-wording) you could also just create some time based rules to block the late night gamer.. But then again the lights do sound like they are way more fun.

JonathanLee

@jrey I like the lights because even with the offline timers he turns it on to play what's already installed on it. Once at 3am till 5am on his last soccer game, he looked like a zombie the next day.

JonathanLee

Screenshot 2023-08-24 at 11.51.41 AM.png

I got my rule id it is 43

However running

Screenshot 2023-08-24 at 11.52.32 AM.png

switch -R does not work for some reason

It would be these rules to show stats only

Screenshot 2023-08-24 at 12.10.29 PM.png

In linux you can just display specific information I wonder how to pluck that out in freebsd

pfctl -vvsr

I will figure it out I just need all the rules that are in use for GAME_IP_GROUP

YEAHHHH use them with pfctl -vvss | grep ', rule ... and we should be good to make a script use a if clause if !null it should work and make a cron for it

JonathanLee

Screenshot 2023-08-24 at 12.19.07 PM.png

pfctl -vvss | grep ', rule 43'

JonathanLee

I am going to use this as a string entry and check to see if it is null if not turn the led on.

Simple enough in theory.

Screenshot 2023-08-24 at 1.02.54 PM.png

JonathanLee

Something maybe like this

#!/bin/sh
pfctl -vvss | grep ', rule 79' >/dev/null
res=$?

if [ $res = 0 ]; then
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 1 >/dev/null
fi


Or...

#!/bin/sh

str="$(pfctl -vvss | grep ', rule 79')"

if [ -z "$str" ]; then
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 1 >/dev/null
fi

Ref Researching:
https://forums.freebsd.org/threads/bin-sh-how-to-save-a-shell-command-output-into-a-string-variable.90088/

stephenw10

The problem there is that the rule number an change if you add or remove rules. I was hoping you might be able to see tags on rules in the states but I don't see a way to do that. Yet...

JonathanLee

@stephenw10 It works if you don't adjust the rules I have it going now.

JonathanLee

/root/deviceonlinenight

#!/bin/sh
pfctl -vvss | grep ', rule 79' >/dev/null
res=$?
if [ $res = 0 ]; 
then
  sysctl -q dev.gpio.2.led.0.pwm=1
  gpioctl -f /dev/gpioc2 0 duty 200 >/dev/null
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 200 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 200 >/dev/null
else
  sysctl -q dev.gpio.2.led.0.pwm=1
  gpioctl -f /dev/gpioc2 0 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 1 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 2 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 4 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 5 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 8 duty 0 >/dev/null
fi

/root/deviceonlineday

#!/bin/sh
pfctl -vvss | grep ', rule 79' >/dev/null
res=$?
if [ $res = 0 ]; 
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 100 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 100 >/dev/null
else
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 100 >/dev/null
fi

JonathanLee

@stephenw10

pfctl -vvss| grep '192.168.1.11' would work great too as it would be IP address based not rule based
also
pfctl -vvss| grep -e 192.168.1.18 -e 192.168.1.11

stephenw10

Nice!

JonathanLee

Kind of amazing looking when testing the deviceonlinenight.sh

It looks like the CM-5

The 90s Connection Machine

JonathanLee

#!/bin/sh
pfctl -vvss | grep ', rule 79' >/dev/null
res=$?
if [ $res = 0 ]; 
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 100 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 6 duty 100 >/dev/null
  gpioctl -f /dev/gpioc2 8 duty 100 >/dev/null
else
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 8 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 7 >/dev/null
fi

This will have purple and red :)

JonathanLee

Another way to do this now you can run the pfctl command once and use the case command to iterate over the variable I named state

#!/bin/sh
state=$( pfctl -vvss )
res=1
resb=1
case "$state" in 
  *, rule 79*)
    res=0
    ;;
esac
case "$state" in 
  *192.168.1.11*)
    resb=0
    ;;
esac
if [ $res = 0 ] && [ $resb = 0 ]; 
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 50 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 6 duty 50 >/dev/null
elif [ $res = 0 ];
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 6 duty 50 >/dev/null
elif [ $resb = 0 ];
then
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 50 >/dev/null
else
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 50 >/dev/null
  
fi

JonathanLee

Here is a version with 3 conditional LED adaptions.

#!/bin/sh
check_current_states=$( pfctl -vvss | grep -e ', rule 84' -e '192.168.1.11' -e '192.168.1.15' )
res=1
resb=1
resc=1
case "$check_current_states" in 
  *", rule 79"* ) res=0 ;;
esac
case "$check_current_states" in
  *192.168.1.11* ) resb=0 ;;
esac
case "$check_current_states" in
  *192.168.1.15* ) resc=0 ;;
esac
if [ $res = 0 ] && [ $resb = 0 ]; 
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 50 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 6 duty 50 >/dev/null
elif [ $res = 0 ];
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 6 duty 50 >/dev/null
elif [ $resb = 0 ];
then
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 50 >/dev/null
else
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 50 >/dev/null
  
fi
if [ $resc = 0 ];
then
  sysctl -q dev.gpio.2.led.0.pwm=1
  gpioctl -f /dev/gpioc2 2 duty 50 >/dev/null
else
  sysctl -q dev.gpio.2.led.0.pwm=1
  gpioctl -f /dev/gpioc2 2 duty 0 >/dev/null

fi