Package Manager / Install is incredibly slow on 6100 since updating to 23.05.1
-
@planedrop said in Package Manager / Install is incredibly slow on 6100 since updating to 23.05.1:
Updating a package (system patches) also took like 10 minutes instead of the usual less than 1.
Check, for example these messages, and do the tests proposed.
-
Looks like a possible IPv6 issue. Easy to test by checking for pkg updates and specifying v4 at the CLI:
pkg-static -d4 update
If that returns quickly andpkg-static -d6 updatejust eventually timesout that's the problem.
You can workaround it, until it's resolved, by setting prefer IPv4 in Sys > Adv > Networking.Steve
-
@stephenw10 Yep ipv6 access is borked - IIRC this has happened before. Will set the prefer IPv4 switch - I assume that's just for pfsense's own use of DNS?
-
Yes, that's just for pfSense's own connections.
-
I also had this problem with Packet Manager on a pfSense 2.7 CE installation some weeks ago and Googled the issue without a solution, until I encountered the problem today on both a 8200MAX and a custom installed system and actually checked the forum and finally know the issue is related to IPv6.
My IPv6 connection is working just fine and I can ping Google/YouTube/etc. IPv6 addresses and load the websites no problem. It appears Netgate server IPv6 is down. Tried pinging www.pfsense.org and forum.netgate.com and they both resolve to IPv6 addresses but there was no response. IPv4 ping did get a response.
To make sure it's not just the pfSense website doesn't respond to PING requests, I actually tested on my laptop with IPv4 disabled, and neither site will load in web browser. Other IPv6 enabled sites are fine. I also tested on my phone's cellular data which has IPv6, and I'd have to wait several seconds before the site starts loading, so I'm assuming it was trying IPv6 first and then fell back to IPv4.
At least it's good to know the issue seems to be with Netgate's server and it's not my configuration error or file corruption or so. I'd rather keep IPv6 enabled so that websites can see me logging in with IPv6 address, but hopefully the issue will get resolved eventually.
-
Yes, it looks like a routing issue. It should be resolved shortly.
-
@stephenw10 Thanks for the help and the answers here, I concur ipv4 seems to be fine, good to know!
-
The Netgate servers' IPv6 connection is back up and looks like we're all good now. There was a new version of Snort on my 8200MAX and it updated super fast (which I tried earlier and kept getting stuck), and Package Manager is loading as it should, with IPv6 enabled on my WAN.
-
I too can confirm it is a lot faster now, seems like we are good to go!
-
Same thing here - see top right :
IPv6 is back, for the forum.
The pfSense pack manager also populates again.
-
Yup, the local issue was resolved. Should be good now.
