pfSense 2.7 with an old 2.4.5 config failing to upgrade

davin.landry

@stephenw10

Yes I do, we have 4 entries in 'Gateways' and 2 rely on the IPSec connection.

Also, sorry for the delay in responding.

stephenw10

Ah so gateways at the remote side of a VTI tunnel?

That should still be valid. Do you have custom values in those? Latency, ping frequency etc?

davin.landry

Yeah, they are for AWS. But no, no custom values, just have monitoring turned off.

stephenw10

Can we see the gateways section from the config you are importing? You can redact any public IP there if you wish.

davin.landry

config-router.xml

stephenw10

That appears to be only the ipsec config. What matters here is the gateway section like:

	<gateways>
		<gateway_item>
			<interface>opt9</interface>
			<gateway>172.27.116.1</gateway>
			<name>WG0GW</name>
			<weight>1</weight>
			<ipprotocol>inet</ipprotocol>
			<descr></descr>
			<monitor_disable></monitor_disable>
			<gw_down_kill_states></gw_down_kill_states>
		</gateway_item>
		<gateway_item>
			<interface>opt14</interface>
			<gateway>dynamic</gateway>
			<name>GIF0_TUNNELV4</name>
			<weight>1</weight>
			<ipprotocol>inet</ipprotocol>
			<descr><![CDATA[Interface GIF0_TUNNELV4 Gateway]]></descr>
		</gateway_item>
		<gateway_item>
			<interface>opt17</interface>
			<gateway>dynamic</gateway>
			<name>WWAN0_PPP</name>
			<weight>1</weight>
			<ipprotocol>inet</ipprotocol>
			<interval>5000</interval>
			<time_period>100000</time_period>
			<alert_interval>20000</alert_interval>
			<descr><![CDATA[Interface WWAN0_PPP Gateway]]></descr>
			<monitor>1.1.1.1</monitor>
			<loss_interval>19995</loss_interval>
		</gateway_item>
		<gateway_item>
			<interface>opt25</interface>
			<gateway>10.0.2.1</gateway>
			<name>WG_GW0</name>
			<weight></weight>
			<ipprotocol>inet</ipprotocol>
			<descr><![CDATA[Wireguard gateway]]></descr>
			<gw_down_kill_states></gw_down_kill_states>
		</gateway_item>
		<defaultgw4>WAN_DHCP</defaultgw4>
		<defaultgw6></defaultgw6>
	</gateways>

davin.landry

Sorry. Here you go.

config-router.xml

stephenw10

Great. Nothing jumps out at me there, I've raised it with our devs.

stephenw10

Hmm, OK are you able to retest that?

If so try removing the <interval/> lines from the config before importing it. If that prevents the error we should be able to add something to allow it.

davin.landry

Yes I can retry, I'll let you know something after the holiday.

davin.landry

Test was successful most of the settings are now in the new system. A few things aren't working, like the openVPN service and DHCP service won't start but I think it might be because it doesn't have any real connections.
I'm also getting the following error now.

PHP Errors:
[28-Nov-2023 03:29:20 America/Chicago] PHP Fatal error: Uncaught TypeError: Cannot access offset of type string on string in /etc/inc/upgrade_config.inc:4290
Stack trace:
#0 /etc/inc/config.lib.inc(513): upgrade_136_to_137()
#1 /etc/rc.bootup(135): convert_config()
#2 {main}
thrown in /etc/inc/upgrade_config.inc on line 4290

stephenw10

Still into 2.7.0 not 2.7.1?
https://github.com/pfsense/pfsense/blob/RELENG_2_7_0/src/etc/inc/upgrade_config.inc#L4290

if (!is_array($dhcpd['numberoptions']['item'])) {

Do you have custom numbered options in your dhcp server config?

Steve

davin.landry

Yes I have 10 total different networks(vlans) with different scopes and 7 of those use the DHCP server.

stephenw10

Right but do any of them have numbered options set like:
Screenshot from 2023-11-28 18-30-57.png

davin.landry

Yeah, "66" on my phone VLAN.

Oh and yeah I must have downloaded this before the update to 2.7.1, It's been on the workbench a little while. I'll update it.

stephenw10

Ok, I don't expect 2.7.1 to be any different but the line numbers in the php error might have changed.