pfsense installation with hardware RAID

Cool_Corona

Choose RAID 1 hot plug and run it virtualized.

No downtime at all.

ozlecz

@jimp yes, i still only see the 2 drives offered during the installation...no logical raid drive seen

ozlecz

@Cool_Corona system jave max 2 sata drives... option in bios is just RAID.. no mention of variants

stephenw10

I would also recommend just using AHCI mode and a ZFS mirror.

mcury

If I may, I would suggest for the OP to watch Level1Techs video:
Youtube Video

In summary, this video will explain why use AHCI and create the ZFS mirror is the way to go, as already said by other members above.

ozlecz

@stephenw10 we tried this and it works with 2.6.0 but not in 2.7.2...installation was success but removing either of the disk and booting with either just one of them failed.
SSD was intel SSD D3-S4510 series 240GB

stephenw10

Is it booting uefi? You could be hitting this: https://redmine.pfsense.org/issues/15083

Though I'd expect it to still boot wit the just the first disk present if so.

ozlecz

@stephenw10 few captures below.

stephenw10

Hmm, the 2nd shot there is with the primary drive I assume?

ozlecz

@stephenw10 actually its mixed up...maybe 1 of those were taken when the bios is set to RAID sir

stephenw10

Ah probably need to see exactly how it's failing in each situation then. But since you are booting EFI t probably will need the manual workaround listed in that bug.

ozlecz

@stephenw10 i was able to duplicate the bug

stephenw10

Yup so it can't mount the efi partition on the secondary. Try running the workaround shown on the bug report to populate it.

ozlecz

@stephenw10 does this mean disabling the EFI boot in bios should sove this issue as well?

stephenw10

Yes if you boot legacy that does not hit that bug.

ozlecz

@stephenw10 thank you very much on this...issue solved.