Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    2.7.2-RELEASE (amd64) Panic - Page fault

    General pfSense Questions
    2
    20
    805
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      carter69
      last edited by

      System logs / settings / : Enable Remote Logging is Off if that is what you are asking about.

      IPv6 on each interface is set to None.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Hmm, so you have no v6 IPs on any interface? That backtrace sure looks like something's trying to use it. Did you ever have IPv6 configured on that install?

        1 Reply Last reply Reply Quote 0
        • C
          carter69
          last edited by

          Unless there is something somewhere else, I just went through Em0, em1, em2, em3, em4, em5 and confirmed that IPV6 Configuration Type is set to None. IPv4 Configuration type set to Static Ipv4. To the best of my knowledge, I have never had IPV6 configured since Frontier never supported it here. Should I try setting each of them to IPV6 DHCP, save and then set back to none ?

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Run ifconfig -va and check there in case something unassigned has somehow got one.

            Check Diag > Routes. There should only be link-local IPv6 addresses there.

            C 1 Reply Last reply Reply Quote 1
            • C
              carter69 @stephenw10
              last edited by stephenw10

              @stephenw10

              ifconfig

              em0: flags=1008943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	description: WANFrontier
	options=4e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
	ether 00:e0:67:1f:db:e0
	inet6 fe80::2e0:67ff:fe1f:dbe0%em0 prefixlen 64 scopeid 0x1
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	description: LAN
	options=4e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
	ether 00:e0:67:1f:db:e1
	inet 172.16.7.254 netmask 0xfffffc00 broadcast 172.16.7.255
	inet6 fe80::2e0:67ff:fe1f:dbe1%em1 prefixlen 64 scopeid 0x2
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em2: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	description: Servers
	options=4e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
	ether 00:e0:67:1f:db:e2
	inet 172.16.3.254 netmask 0xfffffc00 broadcast 172.16.3.255
	inet6 fe80::2e0:67ff:fe1f:dbe2%em2 prefixlen 64 scopeid 0x3
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em3: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	description: UbiquityOut
	options=4e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
	ether 00:e0:67:1f:db:e3
	inet 192.168.52.254 netmask 0xffffff00 broadcast 192.168.52.255
	inet6 fe80::2e0:67ff:fe1f:dbe3%em3 prefixlen 64 scopeid 0x4
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em4: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
	description: DMZ1
	options=4e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
	ether 00:e0:67:1f:db:e4
	inet 192.168.50.254 netmask 0xffffff00 broadcast 192.168.50.255
	inet6 fe80::2e0:67ff:fe1f:dbe4%em4 prefixlen 64 scopeid 0x5
	media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em5: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=4e120bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
	ether 00:e0:67:1f:db:e5
	media: Ethernet autoselect
	status: no carrier
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=1000041<UP,RUNNING,LOWER_UP> metric 0 mtu 1536
	options=0
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet 127.0.0.1 netmask 0x0
	inet 169.254.44.110 netmask 0xfffffffc
	inet 169.254.44.230 netmask 0xfffffffc
	inet 169.254.47.194 netmask 0xfffffffc
	inet 169.254.45.42 netmask 0xfffffffc
	inet 169.254.46.70 netmask 0xfffffffc
	inet 169.254.45.114 netmask 0xfffffffc
	inet 169.254.57.170 netmask 0xfffffffc
	inet 169.254.57.178 netmask 0xfffffffc
	inet 169.254.57.246 netmask 0xfffffffc
	inet 169.254.56.158 netmask 0xfffffffc
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=100<PROMISC> metric 0 mtu 33152
	options=0
	groups: pflog
pfsync0: flags=0 metric 0 mtu 1500
	options=0
	maxupd: 128 defer: off version: 1400
	syncok: 1
	groups: pfsync

              Routes

              2024-02-12_16h31_16.png

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Mmm, nothing current then.

                How often do you see those panics? Is there any sort of pattern to them? Any action that triggers it?

                C 1 Reply Last reply Reply Quote 0
                • C
                  carter69 @stephenw10
                  last edited by

                  @stephenw10
                  It stayed up all weekend, then this morning 8:15am it crashed again.

                  db:0:kdb.enter.default> bt
                  Tracing pid 80056 tid 103031 td 0xfffffe00fe961e40
                  kdb_enter() at kdb_enter+0x32/frame 0xfffffe00fea73960
                  vpanic() at vpanic+0x163/frame 0xfffffe00fea73a90
                  panic() at panic+0x43/frame 0xfffffe00fea73af0
                  trap_fatal() at trap_fatal+0x40c/frame 0xfffffe00fea73b50
                  trap_pfault() at trap_pfault+0x4f/frame 0xfffffe00fea73bb0
                  calltrap() at calltrap+0x8/frame 0xfffffe00fea73bb0
                  --- trap 0xc, rip = 0xffffffff80f44220, rsp = 0xfffffe00fea73c80, rbp = 0xfffffe00fea73d00 ---
                  in6_pcbbind() at in6_pcbbind+0x360/frame 0xfffffe00fea73d00
                  udp6_bind() at udp6_bind+0x13c/frame 0xfffffe00fea73d60
                  sobind() at sobind+0x32/frame 0xfffffe00fea73d80
                  kern_bindat() at kern_bindat+0x96/frame 0xfffffe00fea73dc0
                  sys_bind() at sys_bind+0x9b/frame 0xfffffe00fea73e00
                  amd64_syscall() at amd64_syscall+0x109/frame 0xfffffe00fea73f30
                  fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00fea73f30
                  --- syscall (104, FreeBSD ELF64, bind), rip = 0x828045cea, rsp = 0x82beadaf8, rbp = 0x82beadbc0 ---

                  I have been going through trying to see any correlation but have not figured out any. There are 9 IPsec tunnels to AWS. They are not all always active since some of them shut down after period of inactivity so I had initially thought it might be that but randomly went into the ipsec status and told it to start up ones that were disconnected just to see if that was the cause but could not get it to crash. I removed any extra packages that I did not need in case any of those happened to have a problem. The only ones currently installed are Acme, backup, bind, cron, mailreport , notes, rrd summary, status traffic totals.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Hmm, can you disable bind as a test?

                    Or if you can't do you have it configured to 'Listen on all interfaces'? Can you set that to the required interfaces only?

                    Is it set to IPv4+IPv6? Can you set it to IPv4 only?

                    1 Reply Last reply Reply Quote 0
                    • C
                      carter69
                      last edited by

                      Has stayed up for 2 days 7 hours so knock on wood. But I did set BIND to IPF4 only. It was only set for 2 interfaces (lan and servers).

                      So will see what happens. Appreciate the suggestions.

                      1 Reply Last reply Reply Quote 1
                      • C
                        carter69
                        last edited by

                        Still up for 4 days now and I do have Bind set to only IPV4 for past 2 days.

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Hmm, that seems quite likely then. Not sure why it wouldn't be able to listen on the link-local or localhost v6 addresses though.

                          1 Reply Last reply Reply Quote 0
                          • C
                            carter69
                            last edited by

                            No issues for 9 days now, guess I will leave it in this configuration. Thanks for the suggestions.

                            1 Reply Last reply Reply Quote 1
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.