Crash report!!!!

[Antibiotic]

@stephenw10 said in Crash report!!!!:

I would disable those clients from accepting routes like that

What do you mean, what better to disable?

[stephenw10]

In the OpenVPN client tunnel settings:

[Antibiotic]

@stephenw10 Did , restart OpenVPN and resaving system defaultr gateway. Is it good now?

And second question , is it normally that I create 2 routes for one local address for VPN failover?Is it will work normally?

Local 192.168.20.0/24

[stephenw10]

That looks fine that should work.

Do you mean two outbound NAT rules for the same source subnet?
Then, yes, you need outbound NAT on both VPN interfaces.

[Antibiotic]

@stephenw10 said in Crash report!!!!:

Do you mean two outbound NAT rules for the same source subnet?

Yes , in case of one VPN down to use second VPN. So, is this normal practice, settings in NAT are, OK ?for the same source subnet

[stephenw10]

Yes, those settings look correcy. You need to have OBN on both VPN connections. The OBN rules do not route or pass traffic, they only translate it.

[Antibiotic]

@stephenw10 said in Crash report!!!!:

You need to have OBN on both VPN connections. The OBN rules do not route or pass traffic, they only translate it.

Oh . what it mean OBN. Can you please to show example??

[stephenw10]

OutBound Nat.

What you have there is correct.

[Antibiotic]

@stephenw10 So, do not need any additional rules. All is fine with my settings now?

[stephenw10]

Yes, like I said, what you have there is correct.

[Antibiotic]

@stephenw10 Oki)))

[Antibiotic]

@stephenw10 Hello, regarding this crash with limiters. I did delete Limiters and floating rule. When making filter reload on start have this:

Initializing
Creating aliases
Creating gateway group item...
Generating Limiter rules
Generating NAT rules

Is it standard message during filter reload regarding limiters, because as I wrote for now do not use any Limiters or any rules for Limiters?What I mean, is this message should appear if even do not use Limiters?

[stephenw10]

Yes, that's a standard message.

[Antibiotic]

@stephenw10 Ok, thank's

[Antibiotic]

@stephenw10 Hello, after this settings as your tip have a error in OpenVPN client, should be this expected after apply this settings?https://forum.netgate.com/assets/uploads/files/1715605064071-screenshot-from-2024-05-13-13-55-08.png

Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])

[stephenw10]

@Antibiotic said in Crash report!!!!:

https://forum.netgate.com/assets/uploads/files/1715605064071-screenshot-from-2024-05-13-13-55-08.png

Neither should be a problem. It will just ignore those values the server is sending. As long as you are policy routing traffic across the tunnel it should still work fine.

[Antibiotic]

@stephenw10 Oki)))