-
I have seen this successfully implemented. I have a project for my kid and his friends to do just that. Problem I don't have any real direction to provide to them. They are 9 and i am very old school going back to actually knowing Hollerith and being a beast with amigas. Having said that, is there any guide or support page that someone could direct me to so that I can give them a lead on how to either implement ore brick the mx400. Here is an image of the result "supposedly" .
-
Looking at it that seems to be a badged Lanner appliance so I'd expect to be able to boot pfSense just fine.
First thing I would do is hook up a serial console and see what's shown. Can it boot from USB? Can you access the BIOS setup?
If neither then you may have to move the boot drive into something else to install to it.
Steve
-
S stephenw10 moved this topic from Problems Installing or Upgrading pfSense Software on
-
@stephenw10 you are absolutely correct. I forgot that it is lanner system and just branded. I completely forgot. It won't be here until probably next week. I just got it from eBay. Thanks for reminding me about the hardware origin. I completely forgot that. I mixed my own self up in my own mind. I forgot I looked at lanner for info. I completely forgot. Thanks.
-
@interrupt Back when dinosaurs roamed the earth, I used a second machine with video and a couple of throwaway NICs to install the base system and just get it on the Internet (and enable SSH), then moved the drive to the headless machine, connected to console port via serial, and reconfigured the new NICs when they were recognized at first boot. After that, I'd install packages, write rules, etc., from the web interface Fairly straightforward. Looks like a cool box! A little power hungry, but if the price is right.
-
Merged the two threads here.
-
