Update from 23.09.1 to 24.03_1 always reverts

stephenw10

@joec said in Update from 23.09.1 to 24.03_1 always reverts:

Before update I can see in the update dialog this message:
pfSense-repoc: si_get_packages: failed to run the pkg info command: /usr/local/sbin/pkg-static info -R --raw-format json-compact pfSense-pkg-* 2>&1 pfSense-repoc: no pfSense packages installed

That's a known issue but it's only cosmetic, shouldn't cause a problem here.

What do you have set in the update settings? I assume manual update verification is not enabled?

Does System > Boot Environments show the failed 24.03 BEs?

Steve

joec

Hello Steve,
I cant see the option "manual update verification" ?
As Branch 24.03 stable version ist set

Yes. I can see the failed 24.03 BEs in the Boot Environment

Johannes

stephenw10

I assume you tried clicking 'Verify' manually when it boots into 24.03?

Do you have the boot log from that boot into 24.03? Does it show an error at the console?

joec

Yes your'e right the first time I clicked on Verify.
On the sceond try, I do nothing and the system booted by itself and going back to 23.01.

No boot log

stephenw10

Can you get a console log?

It may be failing at the console something like this:

Configuring crash dumps...
No suitable dump device was found.
/etc/pfSense-rc: /etc/rc.d/createswap: not found
rc.bootonce_verify: ZFS support is required.

*** SYSTEM BOOT FAILURE ***

  Failed Boot Environment: default

   R/r: Enter a recovery shell
   Any: Shutdown immediately

Enter an option:

joec

I can not find any of the above messages.
I attach a snippet of the system.log which shows the boot of V 24.03 until it reboots.

Perhaps it is helpful
boot.txt

stephenw10

The log there doesn't show output sent only to the primary console during boot. Are you able to view the video console when it first boots?

joec

I will try later.

Thank you so far for your help-

Johannes

joec

After another update to 24.03 pfSense remained stable (no reboot).
No error messages while startup.
However, DNS resolving no longer works. No external resolution, internal resolution works.

I then booted 23.09.1 again.
Now I have the problem that I can no longer install any packages.
Error:
WARNING: Current pkg repository has a new PHP major
version. pfSense should be upgraded before
installing any new package.

stephenw10

You would need to set the pkg repo branch back to 23.09.1 in 23.09.1 to install packages.

What are you using for DNS in 24.03? Is the service running? What exactly is failing?

joec

Everything is running now.

The DNS problems resulting from a misconfigured gateway.

Thank's for your help.

Johannes