Pfsense new install no software packages available
-
Any details? CE or Plus? Upgrade (or downgrade)?
-
Did they move to RC mode for 24.08?
-
@da_Beast yeh so I had to reinstall router with settings I had backed up. Had to do a request to get an offline installer as I have ppoe. Was abug in the old version I had . Recommend to reinstall and re flash firmware. Bit of a pain but working solid now.
-
@da_Beast plus, just contact support and they can generate a link to download offline installer for your hardware
-
@da_Beast CE
-
@Billy_C has it ever worked? Did you upgrade or downgrade?
What version of CE are you running?
Is this on physical hardware or are you running a VM? If VM, what hypervisor?
-
@da_Beast
2.7.0-ReleaseYes, maybe a year ago. Been a while since I looked but I have packages installed so it worked at some point.
Hardware. HP prebuilt 7700t
-
@Billy_C Looks like that is not a supported version anymore.
https://docs.netgate.com/pfsense/en/latest/releases/versions.html#id12
I would upgrade it to the latest 2.7.2 and see if that resolves your issue.
-
@Billy_C try https://docs.netgate.com/pfsense/en/latest/releases/2-7-1.html#troubleshooting
Or
https://docs.netgate.com/pfsense/en/latest/troubleshooting/upgrades.html#upgrade-not-offered-library-errorsDon’t install packages unless you have the correct branch selected since it’ll cause problems.
-
Thanks for all the replies.
I ran the upgrade in the command line
pfSense-upgrade -y
and am on 2.7.2 now.
All packages seems to be populating again.