pfSense on Watchguard M370
-
Yup.
-
@stephenw10 Oh, I see..... well, maybe there's a file to rewrite the modules order, perhaps a init script or similar to automate the process.
-
There is one thing you can do. You can add PCI device wiring hints:
https://man.freebsd.org/cgi/man.cgi?query=pci#DEVICE_WIRING
Doing that you can specify the NIC order by the PCI bus location which doesn't change.However I don't recommend doing that. If you lose the custom values (which are not stored in the config) the NICs will be parsed in a completely different order. Better in my opinion to just use the default order and put up with the unexpected NIC sequence.
-
Hello
Original m370 bios can support cpu intel 7th Generation ? -
@kapook00789 said in pfSense on Watchguard M370:
Hello
Original m370 bios can support cpu intel 7th Generation ?The best CPU to use is an Intel Core i7-7700T. It’s fast, multithreaded and only 35W TDP. (QC/8MB/8T/2.9GHz/35W).
As for the original BIOS, as in if you've never run WatchGuard XTM software on it and upgraded, then that I'm not sure. -
@Squuiid said in pfSense on Watchguard M370:
The best CPU to use is an Intel Core i7-7700T. It’s fast, multithreaded and only 35W TDP. (QC/8MB/8T/2.9GHz/35W).
Still surprisingly expensive though. I'd argue the 7500T is better value. Potentially much better depending on how cheap you can find one.
-
@HangmansNoose001380 Hi, I've got an M470 and would like to replace the bios to an unlocked one. Would you please send me the download link? Thank you!
-
@HangmansNoose001380 may i have m470 bios, because i changed cpu to xeon e3 1260l v5, i want to release the speedstep
thank you!
-
Admin edit: Please don't post the password directly here.
-
Can anyone DM me the unlock password bios please?
BigThx
-
@angelroc do always read a thread before posting. It’s there in plain sight.
https://forum.netgate.com/post/1067389 -
A Anteater4341 referenced this topic on
-
hey all, i have seen/know the password but does anyone have a copy of the mod/unlocked bios? I really want to flash a m470 and enable speedstep. any information is greatly appreciated!
all the best
-
Same here. Got a M670 for free and want to enable speedstep.
-
You should see speedshift active on there already if the CPU supports it. Pretty sure the default CPU in the M670 does. That's superior to speedstep in almost every way.
-
I have a problem with my M370, it starts but shuts down at once. I would need a copy of a bios file if anyone has one.
Thanks in advance.
-
Anything shown at the console at all? Did it boot previously?
-
@stephenw10
Can't get into console because it shuts down. It has worked fine for years but after a power outage it won't start. -
But if you have the console open you see nothing at all? No POST output from the BIOS? No errors?
It sounds like a hardware failure. That's what happens if you try to power up without any RAM present for example.
I would try reseating the RAM and CPU.
-
@stephenw10
How to reset RAM and CPU?
I think there is something with the bios that is causing it not to boot. -
No I said 'reseat' the components. So physically remove and re-fit them. Sometimes you can see bad connections if the unit was moved at all.
