pfSense on Watchguard M370
-
@HangmansNoose001380 Hi, I've got an M470 and would like to replace the bios to an unlocked one. Would you please send me the download link? Thank you!
-
@HangmansNoose001380 may i have m470 bios, because i changed cpu to xeon e3 1260l v5, i want to release the speedstep
thank you!
-
Admin edit: Please don't post the password directly here.
-
Can anyone DM me the unlock password bios please?
BigThx
-
@angelroc do always read a thread before posting. It’s there in plain sight.
https://forum.netgate.com/post/1067389 -
A Anteater4341 referenced this topic on
-
hey all, i have seen/know the password but does anyone have a copy of the mod/unlocked bios? I really want to flash a m470 and enable speedstep. any information is greatly appreciated!
all the best
-
Same here. Got a M670 for free and want to enable speedstep.
-
You should see speedshift active on there already if the CPU supports it. Pretty sure the default CPU in the M670 does. That's superior to speedstep in almost every way.
-
I have a problem with my M370, it starts but shuts down at once. I would need a copy of a bios file if anyone has one.
Thanks in advance.
-
Anything shown at the console at all? Did it boot previously?
-
@stephenw10
Can't get into console because it shuts down. It has worked fine for years but after a power outage it won't start. -
But if you have the console open you see nothing at all? No POST output from the BIOS? No errors?
It sounds like a hardware failure. That's what happens if you try to power up without any RAM present for example.
I would try reseating the RAM and CPU.
-
@stephenw10
How to reset RAM and CPU?
I think there is something with the bios that is causing it not to boot. -
No I said 'reseat' the components. So physically remove and re-fit them. Sometimes you can see bad connections if the unit was moved at all.
-
It was Google Translate that translated it to reset.
Reseat the RAM and CPU, tried another PSU also made no difference. -
So, to confirm, you see no output at all at the serial console?
I'm not sure there is any way to recover that. Even it is a bad BIOS. But I would only expect a bad BIOS if you were trying to flash it and it failed.
-
@v16v Do you have an SPI Flash reader that you can read the BIOS from your M370 with? The BIOS has checksums for each module so if there's corruption it should be possible to figure out where.
-
@ost0
I have a CH341A Flash reader. How do I know what checksums should be for each module? -
When you open the BIOS file it should show you.
I still doubt this is a bad BIOS though if you were not trying to modify it when it failed.
-
@stephenw10
I said it was after a power outage that it didn't start. The bios reading gave nothing, it was completely blank.
