Netgate 4200 - internet speed slower ca. 10Mb/s than ISP router

[johndoe102]

@Gertjan

I am aware about the WAN's MTU. I tried different values starting with 1500 and then with 1492.
I also tried to add and change MSS values (without, then 1500 and then 1492).
Unfortunately no changes at all.
regards
Tom

[stephenw10]

Mmm, you may need to set the parent NIC to 1508.

However I would want more data points. You could just be seeing some random link rate differences or line loading etc.

[johndoe102]

@stephenw10

Hello,
I set all back to default (so no MTU set in the GUI).
Please find attached screen shots from interface status and shell output for ifconfig -a
Maybe this can help you a bit.

WAN is on igc3 with VLAN 7 for PPPoE
LAN is on igc2

best regards
Tom

[Gertjan]

@johndoe102 said in Netgate 4200 - internet speed slower ca. 10Mb/s than ISP router:

I tried different values starting with 1500 and then with 1492.

Trying ?
What about : pppoe ping determine packet size MTU
The answer is is probably on the first link. Like this one Ping Test to determine Optimal MTU Size on Router.

[stephenw10]

What's with the VLAN 7 tagged interface in igc3?

[johndoe102]

@stephenw10
VLAN 7 is required by my local ISP provider for PPPoE connection (VDSL in Germany). So not only user/password.

best regards
Tom

[stephenw10]

Then the PPPoE should be on igc3.7 not igc3 directly.

[johndoe102]

@stephenw10

Hello,
PPPoE is on igc3.7.

regards
Tom

[johndoe102]

@Gertjan

I did that too ... determined based on those descriptions ... the results I tried were: 1500,1492,1472,1464.
No difference. The download behind the Netgate 4200 is about 10Mb/s slower than if use the default ISP modem/router combo.

regards
Tom

[w0w]

@johndoe102
Try 1508 for vlan7 interface and 1500 for PPPoE
Also try deferred setting
https://docs.netgate.com/pfsense/hardware/tune.html#pppoe-with-multi-queue-nics

[johndoe102]

@w0w
Thank you for the hints.
regards
Tom