if_pppoe ping works but dns doesn't?
-
Since the release of if_pppoe I'm always getting the same issue, no dns resolving but ping works.
Sep 5 09:17:58 ppp 48942 process 48942 terminated Sep 5 09:17:58 ppp 48942 [wan_link0] Link: Shutdown Sep 5 09:17:58 ppp 48942 [wan] Bundle: Shutdown Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: Close event Sep 5 09:17:56 ppp 48942 [wan_link0] Link: CLOSE event Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: state change Closing --> Initial Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: LayerFinish Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: Down event Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: state change Stopping --> Closing Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: Close event Sep 5 09:17:56 ppp 48942 [wan_link0] Link: giving up after 0 reconnection attempts Sep 5 09:17:56 ppp 48942 [wan_link0] Link: DOWN event Sep 5 09:17:56 ppp 48942 [wan_link0] PPPoE: connection closed Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: LayerDown Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: SendTerminateAck #4 Sep 5 09:17:56 ppp 48942 [wan] IPV6CP: state change Closed --> Initial Sep 5 09:17:56 ppp 48942 [wan] IPV6CP: Down event Sep 5 09:17:56 ppp 48942 [wan] IPCP: state change Closed --> Initial Sep 5 09:17:56 ppp 48942 [wan] IPCP: Down event Sep 5 09:17:56 ppp 48942 [wan] IPV6CP: Close event Sep 5 09:17:56 ppp 48942 [wan] IPCP: Close event Sep 5 09:17:56 ppp 48942 [wan] Bundle: Status update: up 0 links, total bandwidth 9600 bps Sep 5 09:17:56 ppp 48942 [wan_link0] Link: Leave bundle "wan" Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: state change Opened --> Stopping Sep 5 09:17:56 ppp 48942 [wan_link0] LCP: rec'd Terminate Request #70 (Opened) Sep 5 09:17:56 ppp 48942 [wan] Bundle: closing link "wan_link0"... Sep 5 09:17:56 ppp 48942 [wan] Bundle: No NCPs left. Closing links... Sep 5 09:17:56 ppp 48942 [wan] IPV6CP: LayerFinish Sep 5 09:17:56 ppp 48942 [wan] IPV6CP: state change Closing --> Closed Sep 5 09:17:56 ppp 48942 [wan] IPV6CP: rec'd Terminate Ack #2 (Closing) Sep 5 09:17:56 ppp 48942 [wan] IPCP: LayerFinish Sep 5 09:17:56 ppp 48942 [wan] IPCP: state change Closing --> Closed Sep 5 09:17:56 ppp 48942 [wan] IPCP: rec'd Terminate Ack #4 (Closing) Sep 5 09:17:56 ppp 48942 [wan] IPCP: SendTerminateReq #5 Sep 5 09:17:56 ppp 48942 [wan] IFACE: Set description "WAN" Sep 5 09:17:56 ppp 48942 [wan] IFACE: Rename interface pppoe0 to pppoe0 Sep 5 09:17:56 ppp 48942 [wan] IFACE: Down event Sep 5 09:17:55 ppp 48942 [wan] IPV6CP: LayerDown Sep 5 09:17:55 ppp 48942 [wan] IPV6CP: SendTerminateReq #2 Sep 5 09:17:55 ppp 48942 [wan] IPV6CP: state change Opened --> Closing Sep 5 09:17:55 ppp 48942 [wan] IPV6CP: Close event Sep 5 09:17:55 ppp 48942 [wan] IFACE: Removing IPv4 address from pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): Can't assign requested address Sep 5 09:17:54 ppp 48942 [wan] IPCP: LayerDown Sep 5 09:17:54 ppp 48942 [wan] IPCP: SendTerminateReq #4 Sep 5 09:17:54 ppp 48942 [wan] IPCP: state change Opened --> Closing Sep 5 09:17:54 ppp 48942 [wan] IPCP: Close event Sep 5 09:17:54 ppp 48942 [wan] IFACE: Close event Sep 5 09:17:54 ppp 48942 caught fatal signal TERM Sep 4 18:00:34 ppp 48942 [wan] 020a:f7ff:fe49:8660 -> 0200:00ff:fe00:0000 Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: LayerUp Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: state change Ack-Sent --> Opened Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent) Sep 4 18:00:34 ppp 48942 [wan] IFACE: Add description "WAN" Sep 4 18:00:34 ppp 48942 [wan] IFACE: Rename interface ng0 to pppoe0 Sep 4 18:00:34 ppp 48942 [wan] IFACE: Up event Sep 4 18:00:34 ppp 48942 [wan] 107.xxx.xxx.38 -> 198.xxx.xxx.33 Sep 4 18:00:34 ppp 48942 [wan] IPCP: LayerUp Sep 4 18:00:34 ppp 48942 [wan] IPCP: state change Ack-Sent --> Opened Sep 4 18:00:34 ppp 48942 [wan] IPADDR 107.xxx.xxx.38 Sep 4 18:00:34 ppp 48942 [wan] IPCP: rec'd Configure Ack #3 (Ack-Sent) Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: state change Req-Sent --> Ack-Sent Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: SendConfigAck #202 Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: rec'd Configure Request #202 (Req-Sent) Sep 4 18:00:34 ppp 48942 [wan] IPADDR 107.xxx.xxx.38 Sep 4 18:00:34 ppp 48942 [wan] IPCP: SendConfigReq #3 Sep 4 18:00:34 ppp 48942 [wan] 107.xxx.xxx.38 is OK Sep 4 18:00:34 ppp 48942 [wan] IPADDR 107.xxx.xxx.38 Sep 4 18:00:34 ppp 48942 [wan] IPCP: rec'd Configure Nak #2 (Ack-Sent) Sep 4 18:00:34 ppp 48942 [wan] IPADDR 0.0.0.0 Sep 4 18:00:34 ppp 48942 [wan] IPCP: SendConfigReq #2 Sep 4 18:00:34 ppp 48942 [wan] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Sep 4 18:00:34 ppp 48942 [wan] IPCP: rec'd Configure Reject #1 (Ack-Sent) Sep 4 18:00:34 ppp 48942 [wan] IPCP: state change Req-Sent --> Ack-Sent Sep 4 18:00:34 ppp 48942 [wan] IPADDR 198.xxx.xxx.33 Sep 4 18:00:34 ppp 48942 [wan] IPCP: SendConfigAck #167 Sep 4 18:00:34 ppp 48942 [wan] 198.xxx.xxx.33 is OK Sep 4 18:00:34 ppp 48942 [wan] IPADDR 198.xxx.xxx.33 Sep 4 18:00:34 ppp 48942 [wan] IPCP: rec'd Configure Request #167 (Req-Sent) Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: SendConfigReq #1 Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: state change Starting --> Req-Sent Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: Up event Sep 4 18:00:34 ppp 48942 [wan] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Sep 4 18:00:34 ppp 48942 [wan] IPADDR 0.0.0.0 Sep 4 18:00:34 ppp 48942 [wan] IPCP: SendConfigReq #1 Sep 4 18:00:34 ppp 48942 [wan] IPCP: state change Starting --> Req-Sent Sep 4 18:00:34 ppp 48942 [wan] IPCP: Up event Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: LayerStart Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: state change Initial --> Starting Sep 4 18:00:34 ppp 48942 [wan] IPV6CP: Open event Sep 4 18:00:34 ppp 48942 [wan] IPCP: LayerStart Sep 4 18:00:34 ppp 48942 [wan] IPCP: state change Initial --> Starting Sep 4 18:00:34 ppp 48942 [wan] IPCP: Open event Sep 4 18:00:34 ppp 48942 [wan] Bundle: Status update: up 1 link, total bandwidth 64000 bps Sep 4 18:00:34 ppp 48942 [wan_link0] Link: Join bundle "wan" Sep 4 18:00:34 ppp 48942 [wan_link0] Link: Matched action 'bundle "wan" ""' Sep 4 18:00:34 ppp 48942 [wan_link0] LCP: authorization successful Sep 4 18:00:34 ppp 48942 [wan_link0] CHAP: rec'd SUCCESS #51 len: 4 Sep 4 18:00:34 ppp 48942 [wan_link0] CHAP: sending RESPONSE #51 len: 40 Sep 4 18:00:34 ppp 48942 [wan_link0] CHAP: Using authname "xxx@pppoe.ebox.net" Sep 4 18:00:34 ppp 48942 [wan_link0] Name: "JUNOS"
Sep 5 09:29:45 nginx 2025/09/05 09:29:45 [error] 81461#100290: send() failed (54: Connection reset by peer) while logging to syslog, server: unix:/var/run/log Sep 5 09:29:45 php-fpm 79579 /index.php: Successful login for user 'admin' from: 10.10.0.11 (Local Database) Sep 5 09:20:26 login 64826 login on ttyv0 as root Sep 5 09:20:25 vnstatd 46318 Interface "bce1.40" disabled. Sep 5 09:20:25 vnstatd 46318 Interface "bxe0.30" disabled. Sep 5 09:20:25 vnstatd 46318 Monitoring (17): pppoe0 (1000 Mbit) pfsync0 (1000 Mbit) pflog0 (1000 Mbit) ovpns3 (1000 Mbit) ovpns2 (1000 Mbit) ovpns1 (1000 Mbit) enc0 (1000 Mbit) bxe1 (10000 Mbit) bxe0.69 (10000 Mbit) bxe0.6 (10000 Mbit) bxe0.5 (10000 Mbit) bxe0.4 (10000 Mbit) bxe0.30 (1000 Mbit) bxe0 (10000 Mbit) bce1.40 (1000 Mbit) bce1 (1000 Mbit) bce0 (1000 Mbit) Sep 5 09:20:25 vnstatd 46318 Data retention: 48 5MinuteHours, 4 HourlyDays, 62 DailyDays, 25 MonthlyMonths, -1 YearlyYears, 20 TopDayEntries Sep 5 09:20:25 vnstatd 46318 vnStat daemon 2.12 (pid:46318 uid:0 gid:0, SQLite 3.46.1) Sep 5 09:20:25 vnstatd 48885 Error: pidfile "/var/run/vnstat/vnstat.pid" lock failed (Resource temporarily unavailable), exiting. Sep 5 09:20:25 root 46259 Bootup complete Sep 5 09:20:25 vnstatd 85230 SIGTERM received, exiting. Sep 5 09:20:18 arpwatch 870 listening on bxe0.4 Sep 5 09:20:18 arpwatch 529 listening on bxe0.5 Sep 5 09:20:18 arpwatch 67 listening on bxe0 Sep 5 09:20:15 vnstatd 85230 Interface "bce1.40" disabled. Sep 5 09:20:15 vnstatd 85230 Interface "bxe0.30" disabled. Sep 5 09:20:15 vnstatd 85230 Monitoring (17): pppoe0 (1000 Mbit) pfsync0 (1000 Mbit) pflog0 (1000 Mbit) ovpns3 (1000 Mbit) ovpns2 (1000 Mbit) ovpns1 (1000 Mbit) enc0 (1000 Mbit) bxe1 (10000 Mbit) bxe0.69 (10000 Mbit) bxe0.6 (10000 Mbit) bxe0.5 (10000 Mbit) bxe0.4 (10000 Mbit) bxe0.30 (1000 Mbit) bxe0 (10000 Mbit) bce1.40 (1000 Mbit) bce1 (1000 Mbit) bce0 (1000 Mbit) Sep 5 09:20:15 vnstatd 85230 Data retention: 48 5MinuteHours, 4 HourlyDays, 62 DailyDays, 25 MonthlyMonths, -1 YearlyYears, 20 TopDayEntries Sep 5 09:20:15 vnstatd 85230 vnStat daemon 2.12 (pid:85230 uid:0 gid:0, SQLite 3.46.1) Sep 5 09:20:15 kernel pppoe0: promiscuous mode enabled Sep 5 09:20:15 kernel bxe0.4: promiscuous mode enabled Sep 5 09:20:15 kernel bxe0.6: promiscuous mode enabled Sep 5 09:20:15 kernel bxe0.5: promiscuous mode enabled Sep 5 09:20:15 kernel bxe0: promiscuous mode enabled Sep 5 09:20:15 php-cgi 21500 notify_monitor.php: Could not send the message to xxx@me.com -- Error: Failed to connect to smtp.gmail.com:587 [SMTP: Failed to connect socket: php_network_getaddresses: getaddrinfo for smtp.gmail.com failed: Name does not resolve (code: -1, response: )] Sep 5 09:20:15 php-fpm 79579 /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Sep 5 09:20:14 check_reload_status 495 Reloading filter Sep 5 09:20:14 check_reload_status 495 Starting packages Sep 5 09:20:14 php-fpm 436 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 107.xxx.xxx.38 -> 66.xxx.xxx.168 - Restarting packages. Sep 5 09:20:13 php-fpm 79579 /rc.newwanip: Interface is unassigned, nothing to do. Sep 5 09:20:13 php-fpm 79579 /rc.newwanip: rc.newwanip: Info: starting on ovpns3. Sep 5 09:20:12 php-fpm 79579 /rc.newwanip: Interface is unassigned, nothing to do. Sep 5 09:20:12 php-fpm 79579 /rc.newwanip: rc.newwanip: Info: starting on ovpns2. Sep 5 09:20:12 php-fpm 79579 /rc.newwanip: Interface is unassigned, nothing to do. Sep 5 09:20:12 php-fpm 79579 /rc.newwanip: rc.newwanip: Info: starting on ovpns1. Sep 5 09:20:12 kernel ovpns3: link state changed to UP Sep 5 09:20:12 check_reload_status 495 rc.newwanip starting ovpns3 Sep 5 09:20:12 php-fpm 436 /rc.newwanip: Creating rrd update script Sep 5 09:20:12 php-fpm 436 OpenVPN PID written: 3194 Sep 5 09:20:11 kernel ovpns3: link state changed to DOWN Sep 5 09:20:11 kernel ovpns2: link state changed to UP Sep 5 09:20:11 php-fpm 436 OpenVPN terminate old pid: 75580 Sep 5 09:20:11 check_reload_status 495 rc.newwanip starting ovpns2 Sep 5 09:20:11 php-fpm 436 OpenVPN PID written: 93147 Sep 5 09:20:11 kernel ovpns2: link state changed to DOWN Sep 5 09:20:11 php-fpm 436 OpenVPN terminate old pid: 65921 Sep 5 09:20:11 kernel ovpns1: link state changed to UP Sep 5 09:20:11 check_reload_status 495 rc.newwanip starting ovpns1 Sep 5 09:20:11 check_reload_status 495 Reloading filter Sep 5 09:20:11 php-fpm 436 OpenVPN PID written: 84119 Sep 5 09:20:11 kernel ovpns1: link state changed to DOWN Sep 5 09:20:11 check_reload_status 495 Reloading filter Sep 5 09:20:11 php-fpm 436 OpenVPN terminate old pid: 58145 Sep 5 09:20:10 php-fpm 436 /rc.newwanip: Resyncing OpenVPN instances for interface WAN. Sep 5 09:20:09 php-fpm 58220 /rc.dyndns.update: Curl error occurred: Could not resolve host: api.cloudflare.com Sep 5 09:20:09 php-fpm 436 /rc.newwanip: Curl error occurred: Could not resolve host: api.cloudflare.com Sep 5 09:19:58 php-fpm 435 /rc.start_packages: Restarting/Starting all packages. Sep 5 09:19:57 sshguard 11504 Now monitoring attacks. Sep 5 09:19:57 syslogd kernel boot file is /boot/kernel/kernel Sep 5 09:19:57 syslogd exiting on signal 15 Sep 5 09:19:57 sshguard 16030 Exiting on signal. Sep 5 09:19:57 sshguard 19169 Exiting on signal. Sep 5 09:19:57 kernel done. Sep 5 09:19:57 php-cgi 542 rc.bootup: Creating rrd update script Sep 5 09:19:57 php-cgi 542 rc.bootup: The command '/usr/bin/nice -n20 /usr/local/bin/rrdtool update /var/db/rrd/system-sensors.rrd N:U:U:U:U:U' returned exit code '1', the output was 'ERROR: /var/db/rrd/system-sensors.rrd: found extra data on update argument: U:U:U:U' Sep 5 09:19:53 kernel done. Sep 5 09:19:53 php-cgi 542 rc.bootup: The command '/usr/local/sbin/strongswanrc stop' returned exit code '1', the output was 'strongswan not running? (check /var/run/daemon-charon.pid).' Sep 5 09:19:53 check_reload_status 495 Updating all dyndns Sep 5 09:19:52 kernel done. Sep 5 09:19:52 php-cgi 542 rc.bootup: NTPD is starting up. Sep 5 09:19:47 php-fpm 436 /rc.newwanip: sync unbound done. Sep 5 09:19:47 php-fpm 436 /rc.newwanip: dhcp6 init complete. Continuing Sep 5 09:19:47 rtsold 68251 RTSOLD Lock in place - sending SIGHUP to dhcp6c Sep 5 09:19:47 rtsold 67556 Received RA specifying route fe80::200:ff:fe00:0 for interface wan(pppoe0) Sep 5 09:19:47 php-fpm 435 /rc.newwanipv6: Gateway, NONE AVAILABLE Sep 5 09:19:47 php-fpm 435 /rc.newwanipv6: Gateway, NONE AVAILABLE Sep 5 09:19:46 php-fpm 436 /rc.newwanip: IP Address has changed, killing states on former IP Address 107.xxx.xxx.38. Sep 5 09:19:46 php-fpm 436 /rc.newwanip: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6' Sep 5 09:19:46 php-fpm 436 /rc.newwanip: Gateway, none 'available' for inet, use the first one configured. 'WAN_PPPOE' Sep 5 09:19:46 php-fpm 436 /rc.newwanip: dpinger: status socket /var/run/dpinger_WAN_PPPOE~66.xxx.xxx.168~198.xxx.xxx.33.sock not found Sep 5 09:19:46 php-fpm 436 /rc.newwanip: dpinger: status socket /var/run/dpinger_WAN_DHCP6~2606:xxx:xxx:xxx:xxx:xxx:xxx:8660~2606:4700:4700::1111.sock not found Sep 5 09:19:46 php-fpm 435 /rc.newwanipv6: Removing static route for monitor 2606:4700:4700::1111 and adding a new route through pppoe0 Sep 5 09:19:46 php-fpm 435 /rc.newwanipv6: rc.newwanipv6: on (IP address: 2606:xxx:xxx:xxx:xxx:xxx:xxx:8660) (interface: wan) (real interface: pppoe0). Sep 5 09:19:46 php-fpm 435 /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0. Sep 5 09:19:46 php-fpm 436 /rc.newwanip: Removing static route for monitor 2606:4700:4700::1111 and adding a new route through pppoe0 Sep 5 09:19:46 php-fpm 436 /rc.newwanip: rc.newwanip: on (IP address: 66.xxx.xxx.168) (interface: WAN[wan]) (real interface: pppoe0). Sep 5 09:19:46 php-fpm 436 /rc.newwanip: rc.newwanip: Info: starting on pppoe0. Sep 5 09:19:45 check_reload_status 495 rc.newwanipv6 starting pppoe0 Sep 5 09:19:45 php-cgi 542 rc.bootup: sync unbound done. Sep 5 09:19:45 check_reload_status 495 rc.newwanip starting pppoe0 Sep 5 09:19:45 php 94545 /usr/local/sbin/ppp-ipv6: Starting rtsold process on wan(pppoe0) Sep 5 09:19:45 php 94545 /usr/local/sbin/ppp-ipv6: Starting DHCP6 client for interfaces pppoe0 Sep 5 09:19:45 php 94545 /usr/local/sbin/ppp-ipv6: Accept router advertisements on interface pppoe0 Sep 5 09:19:44 kernel pppoe0: link state changed to UP Sep 5 09:19:44 kernel bce0: Gigabit link up! Sep 5 09:19:44 php-cgi 542 rc.bootup: Unbound start waiting on dhcp6c. Sep 5 09:19:43 php-cgi 542 rc.bootup: Unbound start waiting on dhcp6c. Sep 5 09:19:42 php-cgi 542 rc.bootup: Unbound start waiting on dhcp6c. Sep 5 09:19:41 php-fpm 436 /rc.linkup: Ignoring link event during boot sequence. Sep 5 09:19:41 php-fpm 435 /rc.linkup: Ignoring link event during boot sequence.
-
If you're seeing that output in the ppp log then you're not using the if_pppoe module.
Did you enable it between those two log entries?
How are you testing? What error(s) are you seeing?
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.