no traffic shaping on NAT forwarded ports
-
I found than shaper per IP works, but if I set external port forward for an IP - pfsense stops shaping this IP - outgoing queue exists but shows only part of traffic.
-
The shaper is stateful, so only new connectionas are assigned to a queue. Reset your states at diagnostics>states, reset state tab, and see if it works like intended after that.
-
I found than shaper per IP works, but if I set external port forward for an IP - pfsense stops shaping this IP - outgoing queue exists but shows only part of traffic.
Need more information for this.
Version
Screenshots of the port forward
Screenshots of the queues and rulesconfig.xml and /tmp/rules.debug would be helpful too
–Bill
-
tcp/udp port forward from external 22105 to internal 192.168.105.105:22105
some other forwards to 192.168.1.2internal network is 192.168.0.0/16
queues:
upload:name: up105105
bw = 1%
priority = 1
m2= 25kB
RED,ECN,
qWanrootother filelds are empty
download: the same as above but
name: down105105
m2 is empty
qLanrootrule:
upload queue - up105105
download queue - down105105 (I found that specifying here qP2Pdown doesn't work)
LAN->WAN
protocol: any
source: 192.168.105.105 (single host)
rest of fields are empty/defaultsquid is running in transparent mode,
version: snapshot 25/03/2006