Olicom Token Ring Cards

sullrich · Jun 19, 2006, 9:57 PM

I have 0 expsoure to token ring. Sorry to say but this is not something that will work (most likely).

hoba · Jun 19, 2006, 10:53 PM

omg, why do you want to still run token ring in 2006?

trout · Jun 20, 2006, 2:18 PM

Well we have a few as400 that still have some token ring.

And a few PCs that have TR cards.

Why change if not broken :) …. we changing them as we upgrade them .... just taking slow approach

trout · Jun 20, 2006, 2:19 PM

Why is that … according to BSD docs the token cards are handled just like eth ones just a difference driver.

And if BSD has a driver why couldn't pfsense?

sullrich · Jun 20, 2006, 5:39 PM

@trout:

Why is that … according to BSD docs the token cards are handled just like eth ones just a difference driver.

And if BSD has a driver why couldn't pfsense?

I said that I have 0 exposure to it. Give it a try, I am not sure if it works or not.

trout · Jun 20, 2006, 7:07 PM

It does not … :(

billm · Jun 21, 2006, 4:26 AM

FWIW, it's probably because we don't enable the oltr(4) driver:
http://www.freebsd.org/cgi/man.cgi?query=oltr&sektion=4&apropos=0&manpath=FreeBSD+6.1-RELEASE
in our kernel. I don't see much use for it in general in our tree though - it's outdated hardware and it's not worth putting a driver that maybe one person on this planet might use in the tree. I'd suggest pulling down the dev iso and rolling your own - the build process is relatively simple and all you need to do is add the driver to the kernel config. Or get a token ring -> ethernet translational bridge from Olicom (er eBay - hell I can probably dig a few out of the scrap pile at work sigh).

–Bill

trout · Jun 21, 2006, 6:38 PM

@billm:

I'd suggest pulling down the dev iso and rolling your own - the build process is relatively simple and all you need to do is add the driver to the kernel config. Or get a token ring -> ethernet translational bridge from Olicom (er eBay - hell I can probably dig a few out of the scrap pile at work sigh).

–Bill

Can you give me the brief howto on that …
... do you mean down load the dev tar or just modify an install of rc1

Might just take you up on the bridge offer.

Thanks

sullrich · Jun 21, 2006, 6:50 PM

1. Download the developer ISO
2. Load the developer iso and then login to console
3. Wait for the developer bootstrap process to finish
3. Edit /home/pfsense/tools/builder_scripts/conf/pfSense.6 and add the device
5. cd /home/pfsense/tools/builder_scripts/
6. ./build_iso.sh

Wait for it to finish and then you will see an ISO (it will tell you the location).

Please keep in mind this is unsupported territory you are in.

Numbski · Jun 22, 2006, 4:56 PM

But it's gloriously FUN unsupported territory. :D

Really. This will get your foot into the burgening token-ring marketplace. It's about to boom I tell ya. ;D

trout · Jun 23, 2006, 7:20 PM

Yeah legacy is a drag. Beats mass conversion ( $$$ and headache ) Sure Cobol programmers feel the same way. It nice to be able to make the transition tranparent.

Don't like it either, but it sure goes a long way when you can say "no problem can do that" to the people with the money.

With a poor attitude open source can leave a bad taste in Power that be. Open source is about just making it work, and work well. With the added bonus of not spending an arm and a leg.

On to real stuff …..

the script that graps the CVS file for pfSense inside of build_iso.sh just fails really not much information

sullrich · Jun 23, 2006, 7:23 PM

The Freesbie server is currently offline. This data is needed to build a CD.

trout · Jun 23, 2006, 7:45 PM

Ok, thanks

.. ETA … is there big problem or just routine up when u done?

sullrich · Jun 23, 2006, 8:09 PM

Not sure what the problem is. I don't admin their server.

trout · Jun 26, 2006, 8:06 PM

@sullrich:

1. Download the developer ISO
2. Load the developer iso and then login to console
3. Wait for the developer bootstrap process to finish
3. Edit /home/pfsense/tools/builder_scripts/conf/pfSense.6 and add the device
5. cd /home/pfsense/tools/builder_scripts/
6. ./build_iso.sh

Wait for it to finish and then you will see an ISO (it will tell you the location).

Please keep in mind this is unsupported territory you are in.

I know this is unsupported but could I get a little assistance so I can learn how this works …

I did as above, but update_cvs_depot function from inside build_iso.sh
complained
"move away pfSense/RELENG_1; it is in the way.
so I did some digging
added export SKIP_CHECKOUT=yes
and export SKIP_RSYNC=yes
to my pfsense_local.sh

but it still tries to get CVS files

... so I commented out the call ( cvs is not important to me this point )

... so now when freebsd build is running I notice that it complained about not having
bsdinstaller
cpdup
lua
lighttpd

how do you get the these packages into the build process ????

thanks .......... ahead of time

Numbski · Jul 1, 2006, 1:18 AM

Skip checkout and skip rsync?

You should probably allow one of those to run. I'd leave the checkout in there and set rsh=ssh.

That's the FreeBSD admin in me talking and not a pfSense dev, so YMMV. :)

Side note, I have a Token Ring Jetdirect card for a color laserjet sitting here that mistakenly shipped with my printer. Have a use for it? :D