Nat reflection and udp
-
19000 stream udp nowait/0 nobody /usr/bin/nc nc -u -w 20 192.168.200.200 161
19002 stream tcp nowait/0 nobody /usr/bin/nc nc -w 20 192.168.200.200 8000 -
Yeah it doesn't look "good" but it should work..
-
-
/* $Id: filter.inc,v 1.575.2.248 2006/09/09 22:53:48 sullrich Exp $ */
-
this definatly works correctly here
switch($rule['protocol']) {
case "tcp/udp":
$protocol = "{ tcp udp }";
$ipfrules .= "pass in quick on ${$ifname_real} inet proto tcp from any to $loopback port {$starting_localhost_port} keep state label "NAT REFLECT: Allow traffic to localhost"\n";
$ipfrules .= "pass in quick on ${$ifname_real} inet proto udp from any to $loopback port {$starting_localhost_port} keep state label "NAT REFLECT: Allow traffic to localhost"\n";
break;
case "tcp":
$protocol = $rule['protocol'];
$ipfrules .= "pass in quick on ${$ifname_real} inet proto tcp from any to $loopback port {$starting_localhost_port} keep state label "NAT REFLECT: Allow traffic to localhost"\n";
break;
case "udp":
$protocol = $rule['protocol'];
$ipfrules .= "pass in quick on ${$ifname_real} inet proto udp from any to $loopback port {$starting_localhost_port} keep state label "NAT REFLECT: Allow traffic to localhost"\n";
break;
default:
break;
}NAT Reflection rules
pass in quick on $lan inet proto udp from any to $loopback port 19000 keep state
label "NAT REFLECT: Allow traffic to localhost"
pass in quick on $lan inet proto tcp from any to $loopback port 19001 keep state
label "NAT REFLECT: Allow traffic to localhost" -
Your not making any sense. Are you saying what is commited does not work? There is no difference, the udp case gets hit for tcp OR udp since there is no break.
Watch this example program:
$protocol = "tcp";
switch($protocol) {
case "tcp":
case "udp":
echo "case met";}
?>
php -f test.php
case met#
As you can see since there is no break, the case "udp" gets processed for either.
Now consider this:
$protocol = "udp";
switch($protocol) {
case "tcp":
case "udp":
echo "case met";}
?>
php -f test.php
case met#
As you can see you do not need to do it your way.
-
i agree but that was the result
-
Rerun the commands that I mentioned earlier. I have updated the file to cover the tcp case either way.
I know for a fact that if other devs catch wind of this they are not going to like it. I would have to agree with them, this should not be necessary.
-
i see the issue scott
make the udp case empty above the tcp case
and fill in the tcp case but then look at your working cases in the rdr sections there is the issue
i reran the commands but there is an error in the filter.inc on 389 or thereabouts now as well i fixed an if that was missing an Irole it back scott i will work on it tomorrow i understand what youa re trying to achieve now and how you should do it using your method.
i will have better resourses tomorrow i am at home at moment and is 1ami will send you the diffs tomorrow for your review
-
ok i think you will be happy with the localhost rules but not so pleased with the nc inetd bits
have a look and let me knowit works perfectly and that was my goal
-
Looks like you started with a dated filter.inc.
Can you:
#1 update your filter.inc and make the changes again
#2 send a diff -u patch? I need to also make these changes in -HEAD which this will assist with -
will do it tomorrow for you got it working on a 7-9-06 box.
so will diff for you when i can
-
You need to include the most latest and greatest filter.inc.
http://pfsense.com/cgi-bin/cvsweb.cgi/pfSense/etc/inc/filter.inc?only_with_tag=RELENG_1
-
synced my dev build just now and rebuilt diff attached
-
Thanks, I've commited a slightly different version.
$rule['protocol'] should be used instead of the hard coded udp value since that case can trip for tcp or udp.
-
ok will test this case for you
thanks for wasting all that time scott i know what to do next time -
THE BAD NEWS ON REFLECTION
##########################
TEST WITH SCOTTS COMMITED FILTER.INC
#################################
TEST1
udp rule
########NAT Inbound Redirects
rdr on vlan1 proto udp from any to 192.168.50.254 port { 161 } -> 10.250.100.129
Reflection redirects
rdr on $lan proto udp from any to 192.168.50.254 port { 161 } -> 127.0.0.1 port 19000
NAT Reflection rules
pass in quick on $lan inet proto udp from any to $loopback port 19000 keep state label "NAT REFLECT: Allow traffic to localhost"
Inetd conf
19000 stream udp nowait/0 nobody /usr/bin/nc nc -u -w 20 10.250.100.129 161##########
TEST 2
tcp rules
##########NAT Inbound Redirects
rdr on vlan1 proto tcp from any to 192.168.50.254 port { 80 } -> 10.250.100.129
Reflection redirects
rdr on $lan proto tcp from any to 192.168.50.254 port { 80 } -> 127.0.0.1 port 19002
NAT Reflection rules
pass in quick on $lan inet proto udp from any to $loopback port 19001 keep state label "NAT REFLECT: Allow traffic to localhost"
Inetd conf
19002 stream tcp nowait/0 nobody /usr/bin/nc nc -w 20 10.250.100.129 80############
TEST3
tcp - udp rule
############NAT Inbound Redirects
rdr on vlan1 proto { tcp udp } from any to 192.168.50.254 port { 123 } -> 10.250.100.129
Reflection redirects
rdr on $lan proto { tcp udp } from any to 192.168.50.254 port { 123 } -> 127.0.0.1 port 19004
NAT Reflection rules
pass in quick on $lan inet proto tcp from any to $loopback port 19002 keep state label "NAT REFLECT: Allow traffic to localhost"
pass in quick on $lan inet proto udp from any to $loopback port 19002 keep state label "NAT REFLECT: Allow traffic to localhost"Inetd conf
19004 stream tcp/udp nowait/0 nobody /usr/bin/nc nc -w 20 10.250.100.129 123#############################
TEST WITH ALANS FILTER.INC using the variable in the udp case
############################
#######
TEST1
udp rule
########NAT Inbound Redirects
rdr on vlan1 proto udp from any to 192.168.50.254 port { 161 } -> 10.250.100.129
Reflection redirects
rdr on $lan proto udp from any to 192.168.50.254 port { 161 } -> 127.0.0.1 port 19000
NAT Reflection rules
pass in quick on $lan inet proto udp from any to $loopback port 19000 keep state label "NAT REFLECT: Allow traffic to localhost"
Inetd conf
19000 stream udp nowait/0 nobody /usr/bin/nc nc -u -w 20 10.250.100.129 161##########
TEST 2
tcp rules
##########NAT Inbound Redirects
rdr on vlan1 proto tcp from any to 192.168.50.254 port { 80 } -> 10.250.100.129
Reflection redirects
rdr on $lan proto tcp from any to 192.168.50.254 port { 80 } -> 127.0.0.1 port 19002
NAT Reflection rules
pass in quick on $lan inet proto tcp from any to $loopback port 19001 keep state label "NAT REFLECT: Allow traffic to localhost"
Inetd conf
19002 stream tcp nowait/0 nobody /usr/bin/nc nc -w 20 10.250.100.129 80############
TEST3
tcp - udp rule
############NAT Inbound Redirects
rdr on vlan1 proto { tcp udp } from any to 192.168.50.254 port { 123 } -> 10.250.100.129
Reflection redirects
rdr on $lan proto { tcp udp } from any to 192.168.50.254 port { 123 } -> 127.0.0.1 port 19004
NAT Reflection rules
pass in quick on $lan inet proto tcp from any to $loopback port 19002 keep state label "NAT REFLECT: Allow traffic to localhost"
pass in quick on $lan inet proto udp from any to $loopback port 19002 keep state label "NAT REFLECT: Allow traffic to localhost"Inetd conf
19004 stream tcp/udp nowait/0 nobody /usr/bin/nc nc -w 20 10.250.100.129 123conculsion it just does not work the way you want it to.
ports are not lining up right tcp/udp should use two nc ports and not one.
i think you should remove the feature or really look hard at it. -
I will just remove. I am really tired of reflection.
-
I just commited a change to install both tcp and udp entries for reflection. I am guessing this was the only bug that you are experiencing but its rather hard to tell from re-reading your text.
-
will check it out again i am getting a little tired of this one now but if you want me to work on it i will
let you knwo soon