Snort inilization failure
-
Uninstall snort and reinstall.
-
That seems to have taken care of it. Did you make any changes?
-
You probably installed during the development of the startup notification code. I'll bump the version this weekend.
-
Grr. I just rebooted again, and it did not start up. I can't seem to find a pattern here.
-
ok. The problem still exists. I've rebooted 5 times. Inbetween each reboot, I waited 10 minutes. During the first 3 minutes on each reboot, Snort would start to initialize. 3-4 minutes after rebooting, snort will exit. Only way to get snort to start is to click 'save' under snort settings. After clicking 'save' and about 3 minutes later, snort completes initialization and I start to receive alerts.
Here's the log of when it fails:
Nov 4 16:18:18 snort[1003]: Snort exiting
Nov 4 16:18:18 snort[1003]: Snort exiting
Nov 4 16:18:18 kernel: sis0: promiscuous mode disabled
Nov 4 16:18:18 snort[1003]: ===============================================================================
Nov 4 16:18:18 snort[1003]: ===============================================================================
Nov 4 16:18:18 snort[1003]: PASSED: 0
Nov 4 16:18:18 snort[1003]: PASSED: 0
Nov 4 16:18:18 snort[1003]: LOGGED: 0
Nov 4 16:18:18 snort[1003]: LOGGED: 0
Nov 4 16:18:18 snort[1003]: ALERTS: 0
Nov 4 16:18:18 snort[1003]: ALERTS: 0
Nov 4 16:18:18 snort[1003]: Action Stats:
Nov 4 16:18:18 snort[1003]: Action Stats:
Nov 4 16:18:18 snort[1003]: ===============================================================================
Nov 4 16:18:18 snort[1003]: ===============================================================================
Nov 4 16:18:18 snort[1003]: DISCARD: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: DISCARD: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: OTHER: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: OTHER: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: FRAG: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: FRAG: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: IPX: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: IPX: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: ETHLOOP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: ETHLOOP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: IPv6: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: IPv6: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: EAPOL: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: EAPOL: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: ARP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: ARP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: ICMP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: ICMP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: UDP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: UDP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: TCP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: TCP: 0 (0.000%)
Nov 4 16:18:18 snort[1003]: Breakdown by protocol:
Nov 4 16:18:18 snort[1003]: Breakdown by protocol:
Nov 4 16:18:18 snort[1003]: ===============================================================================
Nov 4 16:18:18 snort[1003]: ===============================================================================
Nov 4 16:18:18 snort[1003]: Outstanding: 709(66.887%)
Nov 4 16:18:18 snort[1003]: Outstanding: 709(66.887%)
Nov 4 16:18:18 snort[1003]: Dropped: 351(33.113%)
Nov 4 16:18:18 snort[1003]: Dropped: 351(33.113%)
Nov 4 16:18:18 snort[1003]: Analyzed: 0(0.000%)
Nov 4 16:18:18 snort[1003]: Analyzed: 0(0.000%)
Nov 4 16:18:18 snort[1003]: Snort received 1060 packets
Nov 4 16:18:18 snort[1003]: Snort received 1060 packets
Nov 4 16:18:18 snort[1003]:–----------------------------- Nov 4 16:18:18 snort[1003]:–-----------------------------
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Memcap: 2097152 Overhead Bytes: 262152
Nov 4 16:18:18 snort[1003]: Memcap: 2097152 Overhead Bytes: 262152
Nov 4 16:18:18 snort[1003]: ,–---[SERVER STATS]–----------
Nov 4 16:18:18 snort[1003]: ,–---[SERVER STATS]–----------
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Memcap: 25165824 Overhead Bytes: 4000016
Nov 4 16:18:18 snort[1003]: Memcap: 25165824 Overhead Bytes: 4000016
Nov 4 16:18:18 snort[1003]: UNIQUE_TRACKER STATS
Nov 4 16:18:18 snort[1003]: UNIQUE_TRACKER STATS
Nov 4 16:18:18 snort[1003]: Score Entry Size:: 112
Nov 4 16:18:18 snort[1003]: Score Entry Size:: 112
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Memcap: 6291456 Overhead Bytes: 1000032
Nov 4 16:18:18 snort[1003]: Memcap: 6291456 Overhead Bytes: 1000032
Nov 4 16:18:18 snort[1003]: SCOREBOARD_STATS: Portscanners
Nov 4 16:18:18 snort[1003]: SCOREBOARD_STATS: Portscanners
Nov 4 16:18:18 snort[1003]: Score Entry Size:: 112
Nov 4 16:18:18 snort[1003]: Score Entry Size:: 112
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Recovered Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Nodes: 0
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Finds: 0 (Sucessful: 0(%0.000000) Unsucessful: 0(%0.000000))
Nov 4 16:18:18 snort[1003]: Memcap: 25165824 Overhead Bytes: 120048
Nov 4 16:18:18 snort[1003]: Memcap: 25165824 Overhead Bytes: 120048
Nov 4 16:18:18 snort[1003]: SCOREBOARD_STATS: Active Talkers
Nov 4 16:18:18 snort[1003]: SCOREBOARD_STATS: Active Talkers
Nov 4 16:18:18 snort[1003]: +–-[ Flow-portscan Stats ]–--------------+
Nov 4 16:18:18 snort[1003]: +–-[ Flow-portscan Stats ]–--------------+
Nov 4 16:18:18 snort[1003]: finds: 0 reversed: 0(%0.000000) find_success: 0 find_fail: 0 percent_success: (%0.000000) new_flows: 0
Nov 4 16:18:18 snort[1003]: finds: 0 reversed: 0(%0.000000) find_success: 0 find_fail: 0 percent_success: (%0.000000) new_flows: 0
Nov 4 16:18:18 snort[1003]: IPV4 count: 0 frees: 0 low_time: 0, high_time: 0, diff: 0h:00:00s
Nov 4 16:18:18 snort[1003]: IPV4 count: 0 frees: 0 low_time: 0, high_time: 0, diff: 0h:00:00s
Nov 4 16:18:18 snort[1003]: Memcap: 10485760 Overhead Bytes 16400 used(%0.156403)/blocks (16400/1) Overhead blocks: 1 Could Hold: (0)
Nov 4 16:18:18 snort[1003]: Memcap: 10485760 Overhead Bytes 16400 used(%0.156403)/blocks (16400/1) Overhead blocks: 1 Could Hold: (0)
Nov 4 16:18:18 snort[1003]: ,–--[ FLOWCACHE STATS ]–--------
Nov 4 16:18:18 snort[1003]: ,–--[ FLOWCACHE STATS ]–--------
Nov 4 16:18:18 snort[1003]: Final Flow Statistics
Nov 4 16:18:18 snort[1003]: Final Flow Statistics
Nov 4 16:18:18 snort[1003]: *** Caught Term-Signal
Nov 4 16:18:18 snort[1003]: *** Caught Term-Signal
Nov 4 16:18:18 snort[1003]: Not Using PCAP_FRAMES
Nov 4 16:18:18 snort[1003]: Not Using PCAP_FRAMES
Nov 4 16:18:18 snort[1003]: Snort initialization completed successfully (pid=1003)
Nov 4 16:18:18 snort[1003]: Snort initialization completed successfully (pid=1003)
Nov 4 16:18:11 check_reload_status: updating dyndns
Nov 4 16:18:11 php: : [SNORT] Snort_dynamic_ip_reload.php is starting.
Nov 4 16:17:11 SnortStartup[1292]: Ram free BEFORE starting Snort: 18M – Ram free AFTER starting Snort: 702M -- Mode ac-sparsebands -- Snort memory usage:
Nov 4 16:16:54 snort2c[1253]: snort2c running in daemon mode pid: 1253
Nov 4 16:16:54 snort2c[1253]: snort2c running in daemon mode pid: 1253
Nov 4 16:16:54 snort[1092]: Daemon parent exiting
Nov 4 16:16:54 snort[1092]: Daemon parent exiting
Nov 4 16:16:52 snort[1092]: Child exited unexpectedly
Nov 4 16:16:52 snort[1092]: Child exited unexpectedly
Nov 4 16:16:51 snort[1242]: FATAL ERROR: Failed to Lock PID File "/var/run//snort_sis0.pid" for PID "1242"
Nov 4 16:16:51 snort[1242]: FATAL ERROR: Failed to Lock PID File "/var/run//snort_sis0.pid" for PID "1242"
Nov 4 16:16:51 snort[1242]: PID path stat checked out ok, PID path set to /var/run/
Nov 4 16:16:51 snort[1242]: PID path stat checked out ok, PID path set to /var/run/
Nov 4 16:16:51 snort[1242]: Var 'sis0_ADDRESS' redefined
Nov 4 16:16:51 snort[1242]: Var 'sis0_ADDRESS' redefined -
No wisdom to add here, but wtf?!?!?!?
Nov 4 16:17:11 SnortStartup[1292]: Ram free BEFORE starting Snort: 18M – Ram free AFTER starting Snort: 702M -- Mode ac-sparsebands -- Snort memory usage:
--Bill
-
I see the same problem.
-
I am also seeing snort randomly restart itself. It seems to happen in the middle of the night. Anyone seeing this in their logs?
-
DHCP? It restarts after renewing the lease. Normal.
-
Ok. That would explain random restarts. However, sometimes when it restarts at night it does not fully initialize and will terminate. I have to click save to start it up again.
-
Ok. That would explain random restarts. However, sometimes when it restarts at night it does not fully initialize and will terminate. I have to click save to start it up again.
I'm getting this as well :
Nov 8 11:27:52 kernel: fxp2: promiscuous mode disabled Nov 8 11:27:52 kernel: pid 83265 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265) Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265)and again after pressing save :
Nov 8 11:34:55 kernel: fxp2: promiscuous mode disabled Nov 8 11:34:55 kernel: pid 84220 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:02 SnortStartup[84242]: Ram free BEFORE starting Snort: 110M -- Ram free AFTER starting Snort: 110M -- Mode ac-sparsebands -- Snort memory usage:The problem is that it doesn't restart, I'm also not sure why it exited in the first place, it's not due to an IP change and 1Gb of ram should be enough
Specs = P4 2.4
1gb ram
3xIntel Pro 100 nics -
Ok. That would explain random restarts. However, sometimes when it restarts at night it does not fully initialize and will terminate. I have to click save to start it up again.
I'm getting this as well :
Nov 8 11:27:52 kernel: fxp2: promiscuous mode disabled Nov 8 11:27:52 kernel: pid 83265 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265) Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265)and again after pressing save :
Nov 8 11:34:55 kernel: fxp2: promiscuous mode disabled Nov 8 11:34:55 kernel: pid 84220 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:02 SnortStartup[84242]: Ram free BEFORE starting Snort: 110M -- Ram free AFTER starting Snort: 110M -- Mode ac-sparsebands -- Snort memory usage:The problem is that it doesn't restart, I'm also not sure why it exited in the first place, it's not due to an IP change and 1Gb of ram should be enough
Specs = P4 2.4
1gb ram
3xIntel Pro 100 nicsI have the same specs on my machine, however when I click save snort does successfully boot back up. If you are not running in ac-sparsebands mode, try running in that mode and see if it works for you.
At any rate at least I know I am not the only one with this problem.
-
It does load back up after I press save, but only for a minute or 2 then it bombs out again
-
Nov 8 11:27:52 kernel: pid 83265 (snort), uid 0: exited on signal 11 (core dumped) …. Sounds like its running out of RAM.
-
On 1GB of ram?
Blimey!
Time to drop snort then :LOL:
The irony here is that it would run for ages on a machine with only 256mb of ram, so I upgraded to 1GB and it won't work for more than a minute or 2.
That's very odd behaviour.
-
1 gig should be plenty. Not sure why its core dumping then.. Shrugs.
-
I am running 1 gig as well. I know its not shutting down due to low ram. When snort is running my memory usage stays around 55-60%. At no point do I see my memory reach 80, 90, or 100%. I have swap enabled and it's always at 0%. When snort is not running my mem usage is 5-6%.
I am not trying to insult you Scott nor do I doubt your intelligence on this issue, but I can say this with 99% certainty: The issue is something other than running out of ram. :)
So basically Snort is not starting up on reboots, and on dhcp renewal.
Do you want me to send you a copy of my config Scott, to see if you can get this to duplicate?
-
I am running 1 gig as well. I know its not shutting down due to low ram. When snort is running my memory usage stays around 55-60%. At no point do I see my memory reach 80, 90, or 100%. I have swap enabled and it's always at 0%. When snort is not running my mem usage is 5-6%.
I am not trying to insult you Scott nor do I doubt your intelligence on this issue, but I can say this with 99% certainty: The issue is something other than running out of ram. :)
So basically Snort is not starting up on reboots, and on dhcp renewal.
Do you want me to send you a copy of my config Scott, to see if you can get this to duplicate?
All the above applies to me too, as does the offer of configs and any other help I can give :)
-
I've noticed something in my testing. It seems that whatever is causing snort to fail on bootup the first time, it's towards the end of the bootup process.
-
I take it the offer of configs and logs is not wanted?
Would a donation help to get this looked at?