Snort inilization failure
-
DHCP? It restarts after renewing the lease. Normal.
-
Ok. That would explain random restarts. However, sometimes when it restarts at night it does not fully initialize and will terminate. I have to click save to start it up again.
-
Ok. That would explain random restarts. However, sometimes when it restarts at night it does not fully initialize and will terminate. I have to click save to start it up again.
I'm getting this as well :
Nov 8 11:27:52 kernel: fxp2: promiscuous mode disabled Nov 8 11:27:52 kernel: pid 83265 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265) Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265)and again after pressing save :
Nov 8 11:34:55 kernel: fxp2: promiscuous mode disabled Nov 8 11:34:55 kernel: pid 84220 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:02 SnortStartup[84242]: Ram free BEFORE starting Snort: 110M -- Ram free AFTER starting Snort: 110M -- Mode ac-sparsebands -- Snort memory usage:The problem is that it doesn't restart, I'm also not sure why it exited in the first place, it's not due to an IP change and 1Gb of ram should be enough
Specs = P4 2.4
1gb ram
3xIntel Pro 100 nics -
Ok. That would explain random restarts. However, sometimes when it restarts at night it does not fully initialize and will terminate. I have to click save to start it up again.
I'm getting this as well :
Nov 8 11:27:52 kernel: fxp2: promiscuous mode disabled Nov 8 11:27:52 kernel: pid 83265 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Not Using PCAP_FRAMES Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265) Nov 8 11:26:06 snort[83265]: Snort initialization completed successfully (pid=83265)and again after pressing save :
Nov 8 11:34:55 kernel: fxp2: promiscuous mode disabled Nov 8 11:34:55 kernel: pid 84220 (snort), uid 0: exited on signal 11 (core dumped) Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Not Using PCAP_FRAMES Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:25 snort[84220]: Snort initialization completed successfully (pid=84220) Nov 8 11:33:02 SnortStartup[84242]: Ram free BEFORE starting Snort: 110M -- Ram free AFTER starting Snort: 110M -- Mode ac-sparsebands -- Snort memory usage:The problem is that it doesn't restart, I'm also not sure why it exited in the first place, it's not due to an IP change and 1Gb of ram should be enough
Specs = P4 2.4
1gb ram
3xIntel Pro 100 nicsI have the same specs on my machine, however when I click save snort does successfully boot back up. If you are not running in ac-sparsebands mode, try running in that mode and see if it works for you.
At any rate at least I know I am not the only one with this problem.
-
It does load back up after I press save, but only for a minute or 2 then it bombs out again
-
Nov 8 11:27:52 kernel: pid 83265 (snort), uid 0: exited on signal 11 (core dumped) …. Sounds like its running out of RAM.
-
On 1GB of ram?
Blimey!
Time to drop snort then :LOL:
The irony here is that it would run for ages on a machine with only 256mb of ram, so I upgraded to 1GB and it won't work for more than a minute or 2.
That's very odd behaviour.
-
1 gig should be plenty. Not sure why its core dumping then.. Shrugs.
-
I am running 1 gig as well. I know its not shutting down due to low ram. When snort is running my memory usage stays around 55-60%. At no point do I see my memory reach 80, 90, or 100%. I have swap enabled and it's always at 0%. When snort is not running my mem usage is 5-6%.
I am not trying to insult you Scott nor do I doubt your intelligence on this issue, but I can say this with 99% certainty: The issue is something other than running out of ram. :)
So basically Snort is not starting up on reboots, and on dhcp renewal.
Do you want me to send you a copy of my config Scott, to see if you can get this to duplicate?
-
I am running 1 gig as well. I know its not shutting down due to low ram. When snort is running my memory usage stays around 55-60%. At no point do I see my memory reach 80, 90, or 100%. I have swap enabled and it's always at 0%. When snort is not running my mem usage is 5-6%.
I am not trying to insult you Scott nor do I doubt your intelligence on this issue, but I can say this with 99% certainty: The issue is something other than running out of ram. :)
So basically Snort is not starting up on reboots, and on dhcp renewal.
Do you want me to send you a copy of my config Scott, to see if you can get this to duplicate?
All the above applies to me too, as does the offer of configs and any other help I can give :)
-
I've noticed something in my testing. It seems that whatever is causing snort to fail on bootup the first time, it's towards the end of the bootup process.
-
I take it the offer of configs and logs is not wanted?
Would a donation help to get this looked at?
-
Try uninstalling and reinstalling the package. I just uploaded a re compiled version.
-
Still experiencing the same issue. Had to click save after reinstall and reboot to get Snort to startup. Any luck PC_Arcade?
-
You may also want to upgrade to http://www.pfsense.com/~sullrich/1.0.1-SNAPSHOT-11-19-2006/
6.2-RC1
-
I have tested the snort package under 1.01 about a week ago and it ran fine for me, although I only ran it for about a couple of days. Not to throw out the obvious here, but if pc_arcade had it running under 256 but not under a gig, it sounds like there is a good possibility that there is possibly some bad ram in the mix. I'd run a checkmem on it and see what happens.
-
You may also want to upgrade to http://www.pfsense.com/~sullrich/1.0.1-SNAPSHOT-11-19-2006/
6.2-RC1
Will do. Does that need to be a fresh install or will an upgrade be ok?
-
I have tested the snort package under 1.01 about a week ago and it ran fine for me, although I only ran it for about a couple of days. Not to throw out the obvious here, but if pc_arcade had it running under 256 but not under a gig, it sounds like there is a good possibility that there is possibly some bad ram in the mix. I'd run a checkmem on it and see what happens.
Doubt it. If it was a bad batch of Memory it wouldn't run at all.
-
-
No go. Snort initialization is stuck in an infinite loop. It will initialize, reach about 90% bootup complete, terminate, and start over. I'm counting five times so far that it has started to initialize, failed, restarted initialization, and it keeps failing over and over.