How to : NATing between LAN and OPT1 ?
-
Hello,
My LAN subnet is 192.168.1.0/24. for maintenance purpose I have to plug some modems on the 10.0.0.0/8 subnet.
so I created a VLAN (OPT1) with LAN as parent and subnet 10.0.0.0/8 .
What do I need to do to make LAN and OPT1 comunicate ?Thanks in advance
Patrice -
Hello,
My LAN subnet is 192.168.1.0/24. for maintenance purpose I have to plug some modems on the 10.0.0.0/8 subnet.
so I created a VLAN (OPT1) with LAN as parent and subnet 10.0.0.0/8 .
What do I need to do to make LAN and OPT1 comunicate ?Thanks in advance
PatriceAll I did was copy the same rule by default for LAN to the OPT1 interface. I thought there was an additional setting similar to say a Cisco PIX config but that was not the case.
Joe