How to : NATing between LAN and OPT1 ?

ppolymorphe · Jun 24, 2007, 12:53 PM

Hello,
My LAN subnet is 192.168.1.0/24. for maintenance purpose I have to plug some modems on the 10.0.0.0/8 subnet.
so I created a VLAN (OPT1) with LAN as parent and subnet 10.0.0.0/8 .
What do I need to do to make LAN and OPT1 comunicate ?

Thanks in advance
Patrice

jtfinley · Jun 25, 2007, 6:26 PM

@ppolymorphe:

Hello,
My LAN subnet is 192.168.1.0/24. for maintenance purpose I have to plug some modems on the 10.0.0.0/8 subnet.
so I created a VLAN (OPT1) with LAN as parent and subnet 10.0.0.0/8 .
What do I need to do to make LAN and OPT1 comunicate ?

Thanks in advance
Patrice

All I did was copy the same rule by default for LAN to the OPT1 interface. I thought there was an additional setting similar to say a Cisco PIX config but that was not the case.

Joe