Dual CPU system only one CPU listed, high usage ?
-
I don't know. Mine runs a SMP box, and uses 2 CPUs
-
Strange issue indeed.
-
I have still found no reason for this ONE CPU install.
I have installed the 1.2BETA1 version and upgraded directly to the latest snapshot from 06-06-2007.
-
I have still found no reason for this ONE CPU install.
I have installed the 1.2BETA1 version and upgraded directly to the latest snapshot from 06-06-2007.
Proper SMP setups in pfsense will show 2 cpus (or more). Someone not too long ago (about 5 week) had the same issue you were having. If I can ask, is your machine a clone or a brand-name server like Compaq? In the previous scenario, the user had a Compaq and had to update his firmware. Once done, both cpu's were detected. Maybe the same will apply to you.
The link to the thread from last month:
http://forum.pfsense.org/index.php/topic,4790.0.html
Good luck!
-
Thanks !
I have 2 the same compaqs with the same BIOS, I just checked and one system has 2CPU's detected and one system just one.
The system with 2 CPU's detected has failed on a reboot so I will check this today evening and update that one directly to the latest version from yesterday because SSH was reachable but HTTPS didn't anymore and firewall-rules that allowed connection were actually blocking them… so HTTPS did not work.
I hope this is also solved in the latest version.
-
The system that had 2 CPU's listed with "dmesg | grep cpu" now has also listed only one CPU.
I don't get it why this happens when the BIOS shows 2 CPU's.
-
Still the same issue with 1.2 RC1
Can it be that this is a FreeBSD + Compaq Hardware Issue ?
-
2x P3 700MHz (fsb 100)
Intel 440 chipsets séries
4x 256 MB PC100 ECC Reg
2x Intel Pro 100/S
1x 3com 3C905c# dmesg | grep cpu cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu0 on motherboard cpu1 on motherboardNo problem i think with my platform and Pfsense 1.0.1, 1.2b1 and now, 1.2b2 …
-
same problem, i have single p4 3ghz with hyperthreading is activated on BIOS.
pfsense 1.2RC1 and 1.0.1 freeze when probing acpi0: <a m="" i="" oemrsdt="">on ASUS P4P800-E motherboard.no result after i load default BIOS config. now i can't use that hardware for pfsense. why? ??? ??? ???</a>
-
problem is solved after i upgrade the BIOS. my case is closed for now. ;D