SquidGuard and blank redirects?

ciarocci · Jan 18, 2008, 9:11 PM

acidrop, try putting your pfSense webGUI back on http and see what happens. You may have to apply changes again in SquidGuard after you do that. There might still be a problem with this working in HTTPS? DVSerg? I myself am unable to change my webGUI to port 80 because it just won't change no matter how many times I apply the change, but that is another issue and others have said they have no problem doing that. Give that a try and report back.

Chris

acidrop · Jan 19, 2008, 9:39 AM

hi

I tried that and if i put webgui at port 80 everything works ok.Just on https is the problem….
Also i have another issue which isn't something new...when i restart pfsense squidguard service doesn't start
automatically although it's enabled..i have to press apply again to make it work

dvserg · Jan 19, 2008, 5:38 PM

Hi all
Still, the problem remains with HTTPS?
Please say - this problem bof modes: on transparent and on non-transparent?
–-
To acidrop - yes, this bug exists and i know about.

PS thanks all for replaying. :)

acidrop · Jan 20, 2008, 9:14 AM

hi dvserg !

I've checked it on both transparent and non transparent mode and the problem is the same.

ciarocci · Jan 23, 2008, 2:41 PM

Confirmed. On HTTPS the errors still persist.

DarknessBBB · Jan 31, 2008, 8:36 AM

Same problem for me :(

acidrop · Feb 1, 2008, 1:54 PM

the error is now corrected…de-install squidguard and install again..you will see a new option on the general settings: Redirect mode

ciarocci · Feb 1, 2008, 6:34 PM

Awesome, the redirects work as planned. One thing to note, the redirects do not work if you put them in the "Destinations" section.

dvserg · Feb 1, 2008, 7:45 PM

@ciarocci:

Awesome, the redirects work as planned. One thing to note, the redirects do not work if you put them in the "Destinations" section.

How does it happens? Example exists?

ciarocci · Feb 5, 2008, 8:53 PM

I think I spoke too soon. I tried to re-create the problem and give you an example and I could not. Maybe I just didn't give the APPLY button the good old "hit it twice" try. :-)

Chris

wompy · Apr 21, 2008, 5:38 AM

first off squidGuard has been working great thank you. I recently switched pfSense webGUI to https and now by errors page are not working. it gives and error that requested URL could not be retrieved. I scanned through this page and I was curious if a work around has been found so that the custom error message would appear. prior when i was running the standard port 80 it worked fine FYI

thanks!

dvserg · Apr 21, 2008, 6:29 AM

It's known problem. With https you can use ext block page (placed on external www server). Use setting on thirst page GUI and redirect path frames in rules ACL page

wompy · Apr 21, 2008, 4:46 PM

I knew it was a problem, just hoped that there was a solution now. Oh well, once again thank you!