Traffic shaper changes [90% completed, please send money to complete bounty]

eri-- · Jul 3, 2008, 11:16 AM

Just replace the file in /etc/inc/filter.inc with the content from this LINK and you should be ok.

Otherwise you just need to delete this 2 lines:
pass quick on {$oc['if']} proto icmp keep state label "let out anything from firewall host itself"
pass quick on {$oc['if']} all keep state label "let out anything from firewall host itself"

and make them

pass out on {$oc['if']} proto icmp keep state label "let out anything from firewall host itself"
pass out on {$oc['if']} all keep state label "let out anything from firewall host itself"

Whichever your prefer.

Ermal

venis_LA · Jul 3, 2008, 3:04 PM

i'm a newbie and want to know where and how can i contribute to get a copy to test 1.3 … many thanks thanks

eri-- · Jul 3, 2008, 3:52 PM

You want access to the new shaper on 1.2 or have you replied on the wrong thread?

venis_LA · Jul 3, 2008, 5:27 PM

i want access to the new shaper .. thanks

eri-- · Jul 3, 2008, 6:20 PM

Well you can send the offerings at ermal.luci@gmail.com and i will give you the link to the new shaper.

ccfiel · Jul 4, 2008, 10:21 PM

ermal, would the new traffic shaper allow you to distribute evenly bandwidth to the active workstations. example i have 2mb bandwidth. first workstation 1 download a file so it gets the 2mb. after minute workstation 2 start download another file so workstation 1 gets 1mb and workstation 2 gets 1mb. is this possible with the new traffic shaper?

chris

eri-- · Jul 4, 2008, 11:44 PM

yes, just use CBQ discipline and it will setup you up for that.

ccfiel · Jul 5, 2008, 4:19 PM

Hello ermal. I have send you a private message about the traffic shaper

Chris

venis_LA · Jul 7, 2008, 2:25 PM

Hello Ermal, I've made myccontribution but have not gotten any links to the new shaper,kindly advise. Thanks.

eri-- · Jul 7, 2008, 4:13 PM

Check you mail i sent the reply with instructions.

Sorry but my connection has been spooky and am replying from another location right now.

Ermal

ccfiel · Jul 9, 2008, 1:35 PM

ermal, i have notice that sticky connection was missing. is this a bug?

chris

eri-- · Jul 9, 2008, 2:31 PM

Will check it before making available the other image.

ccfiel · Jul 9, 2008, 4:10 PM

ok thanks ermal! and load balance does not work :(

eri-- · Jul 9, 2008, 5:09 PM

What do you mean by load balance does not work?!

ccfiel · Jul 9, 2008, 6:32 PM

ermal, I have tried to enable the load balance but only the WAN1 will get all the load but it works well in 1.2 official release. is this also a bug? or just missing something?

chris

eri-- · Jul 9, 2008, 8:12 PM

Can you please send me your rules.debug privately.

ccfiel · Jul 10, 2008, 12:55 AM

Hello ermal, pm sent :)

chris

ccfiel · Jul 11, 2008, 2:03 AM

Hello ermal,

i got this error. :( think this is the load balancer error. any ideas?

Jul 11 01:52:21 php: : New alert found: There were error(s) loading the rules: /tmp/rules.debug:146: syntax error pfctl: Syntax error in config file: pf rules not loaded The line in question reads [146]: pass in quick on $lan route-to { ( xl0 192.168.3.1 ) } from 192.168.0.0/24 to /32 keep state label "USER_RULE: Make sure DMZ 2 traffic goes to WAN2 DMZ"
Jul 11 01:52:21 php: : There were error(s) loading the rules: /tmp/rules.debug:146: syntax error pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [146]: pass in quick on $lan route-to { ( xl0 192.168.3.1 ) } from 192.168.0.0/24 to /32 keep state label "USER_RULE: Make sure DMZ 2 traffic goes to WAN2 DMZ"

chris

ccfiel · Jul 11, 2008, 5:51 AM

ermal, problem solve :) just change my ip /32 to /24

ccfiel · Jul 11, 2008, 7:10 AM

ermal,
load balance is now working :) and sticky connection option appears :) i am now testing your traffic shaper. My first problem is that the system can only see one interface. is this normal?

chris