Traffic shaper changes [90% completed, please send money to complete bounty]
-
i want access to the new shaper .. thanks
-
Well you can send the offerings at ermal.luci@gmail.com and i will give you the link to the new shaper.
-
ermal, would the new traffic shaper allow you to distribute evenly bandwidth to the active workstations. example i have 2mb bandwidth. first workstation 1 download a file so it gets the 2mb. after minute workstation 2 start download another file so workstation 1 gets 1mb and workstation 2 gets 1mb. is this possible with the new traffic shaper?
chris
-
yes, just use CBQ discipline and it will setup you up for that.
-
Hello ermal. I have send you a private message about the traffic shaper
Chris
-
Hello Ermal, I've made myccontribution but have not gotten any links to the new shaper,kindly advise. Thanks.
-
Check you mail i sent the reply with instructions.
Sorry but my connection has been spooky and am replying from another location right now.
Ermal
-
ermal, i have notice that sticky connection was missing. is this a bug?
chris
-
Will check it before making available the other image.
-
ok thanks ermal! and load balance does not work :(
-
What do you mean by load balance does not work?!
-
ermal, I have tried to enable the load balance but only the WAN1 will get all the load but it works well in 1.2 official release. is this also a bug? or just missing something?
chris
-
Can you please send me your rules.debug privately.
-
Hello ermal, pm sent :)
chris
-
Hello ermal,
i got this error. :( think this is the load balancer error. any ideas?
Jul 11 01:52:21 php: : New alert found: There were error(s) loading the rules: /tmp/rules.debug:146: syntax error pfctl: Syntax error in config file: pf rules not loaded The line in question reads [146]: pass in quick on $lan route-to { ( xl0 192.168.3.1 ) } from 192.168.0.0/24 to /32 keep state label "USER_RULE: Make sure DMZ 2 traffic goes to WAN2 DMZ"
Jul 11 01:52:21 php: : There were error(s) loading the rules: /tmp/rules.debug:146: syntax error pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [146]: pass in quick on $lan route-to { ( xl0 192.168.3.1 ) } from 192.168.0.0/24 to /32 keep state label "USER_RULE: Make sure DMZ 2 traffic goes to WAN2 DMZ"chris
-
ermal, problem solve :) just change my ip /32 to /24
-
ermal,
load balance is now working :) and sticky connection option appears :) i am now testing your traffic shaper. My first problem is that the system can only see one interface. is this normal?chris
-
ermal,
I tried to used by queue tab and clone shaper. is this good?chris
-
Well i think the vx driver is not on the list of hardware interfaces that support ALTQ, the traffic shaper.
I searched a little bit and i cannot come to a conclusion can you please verify if it supports it or not?
Instructions to enter it on the list of supported ALTQ interfaces:
Go to Diagnostics->Edit File
load /etc/inc/interfaces.inc
search for "is_altq_capable" function
add it to the list there - after ,"ste" add the line ,"vx"
Save
Go to the traffic shaper and it should show the interfaces
Make a simple configuration and reload the rules.
If it does work report back so it get added to the list.Ermal
-
you right ermal vx is not supported :(
php: : New alert found: There were error(s) loading the rules: pfctl: vx1: driver does not support altq The line in question reads [ vx1]:
Jul 12 00:21:49 php: : There were error(s) loading the rules: pfctl: vx1: driver does not support altq - The line in question reads [ vx1]:so i need another new lan cards
chris