Disk usage shows 100% after updating to squid 2.6.18.1_06
-
hi,
i a running pfs 1.2, i updated squid last night, and since my disk usage shows 100% and clients coudnt get lease from dhcp, help really apreciated
thanks in advance
hadi57
-
i a running pfs 1.2, i updated squid last night, and since my disk usage shows 100% and clients coudnt get lease from dhcp, help really apreciated
I also had this. The quick way - to get you started again - is to:
Stop squid
Get into a root shell on your pfSense box
Run "rm /var/squid/cache/swap.state"
I can't remember if you need to run "squid -z" but there should be no harm in running it.
Start squidYou'll start off with an empty cache but it should start working.
-
I´m running squid 2.6.21_07 on a Pfsense 1.2.1-RC2 and yesterday the proxy crashed. I checked the machine 4 hours before the chrash and it showed 2% disc usage. Then, suddenly 100%. So, on 4 hours the swap.state file had filled up 120gb with… something.
I deleted the file and rebooted the machine and everything runs again. But, I still dont know what caused the problem. Anyone got an idea? Or, have found a solution wich prevents it from happening again.
-
i a running pfs 1.2, i updated squid last night, and since my disk usage shows 100% and clients coudnt get lease from dhcp, help really apreciated
I also had this. The quick way - to get you started again - is to:
Stop squid
Get into a root shell on your pfSense box
Run "rm /var/squid/cache/swap.state"
I can't remember if you need to run "squid -z" but there should be no harm in running it.
Start squidYou'll start off with an empty cache but it should start working.
tx man i have 1.2.2 and there is still this problem width pf.
-
I am now using diskd for "Hard disk cache system" of squid.
I hope this is solution! -
Nope it is not. Is there hope that 1.2.3 RC1 solved this problem?
What about captive portal is it working width squid transparent cache? -
no one?
i am removing lightsquid… and i will see if there is hope -
I had this happen on one system, had to completely delete the cache. For some reason it was using twice as much space as I configured it to use.
Following bern's post above should get it working again.
-
I had this happen on one system, had to completely delete the cache. For some reason it was using twice as much space as I configured it to use.
Following bern's post above should get it working again.
yeap, i learned. but i want to setup pf box and be sure that won't happen more than once :)
-
happened again. pf & squid is useless now 4 me.
can anyone point me how to upgrade or install newer version of squid v2.x ? -
Good afternoon. Same problem here too. I setup 3 boxes of 1.2.2. The 1st one got 100% full disk. So I manually "rm" the swap. But then this afternoon i still got the problem 100% full disk again..The other 2 boxes have no problem.. Strange isnt it… Tried reinstalled the squid same thing 100% swap cache disk full. I even reformat the 1st box same thing 100% disk full cache swap..But the 2 boxes still running and no problem... Anyone?
Thanks,
jigp 1.2.2 -
Looks like it might be time for some people to take a look in the bounty forum…$250 to create a 2.7 stable 6 package.
-
1.2.3-RC2
built on Sat Sep 5 07:02:34 UTC 2009this snapshot and widthout lightsquid 'till now and no problem width 100% disk usage. finnaly stable.
-
i can confirmed this. problem solved.
-
3 boxes here both of them have lightsquid+squid+sg ..but box1 failed and 100% full disk again whew!… 1.2.2
-
update to last snapshot. it worked 4 me
-
Correction, do not upgrade to R3!! I have now same problem, because I was bored and upgrade my firmware to R3. S**T
-
Works fine here RC3 downloaded September 23 http://snapshots.pfsense.org/FreeBSD_RELENG_7_2/pfSense_RELENG_1_2/livecd_installer/pfSense-1.2.3-20090923-1717.iso.gz..
I'm still monitoring it. seems like my disk usage is 2% (users: 16)
jigp
-
i am now using
1.2.3-RC3
built on Mon Sep 21 07:02:42 UTC 2009
3 days is uptime, no crash 'till now -
i a running pfs 1.2, i updated squid last night, and since my disk usage shows 100% and clients coudnt get lease from dhcp, help really apreciated
I also had this. The quick way - to get you started again - is to:
Stop squid
Get into a root shell on your pfSense box
Run "rm /var/squid/cache/swap.state"
I can't remember if you need to run "squid -z" but there should be no harm in running it.
Start squidYou'll start off with an empty cache but it should start working.
thanks man it's work with me
