Disk usage shows 100% after updating to squid 2.6.18.1_06

@hadi57:

i a running pfs 1.2, i updated squid last night, and since my disk usage shows 100% and clients coudnt get lease from dhcp, help really apreciated

I also had this. The quick way - to get you started again - is to:

Stop squid
Get into a root shell on your pfSense box
Run "rm /var/squid/cache/swap.state"
I can't remember if you need to run "squid -z" but there should be no harm in running it.
Start squid

You'll start off with an empty cache but it should start working.

tx man i have 1.2.2 and there is still this problem width pf.

I am now using diskd for "Hard disk cache system" of squid.
I hope this is solution!

Nope it is not. Is there hope that 1.2.3 RC1 solved this problem?
What about captive portal is it working width squid transparent cache?

no one?
i am removing lightsquid… and i will see if there is hope

jimp

I had this happen on one system, had to completely delete the cache. For some reason it was using twice as much space as I configured it to use.

Following bern's post above should get it working again.

@jimp:

I had this happen on one system, had to completely delete the cache. For some reason it was using twice as much space as I configured it to use.

Following bern's post above should get it working again.

yeap, i learned. but i want to setup pf box and be sure that won't happen more than once :)

happened again. pf & squid is useless now 4 me.
can anyone point me how to upgrade or install newer version of squid v2.x ?

jigpe

Good afternoon. Same problem here too. I setup 3 boxes of 1.2.2. The 1st one got 100% full disk. So I manually "rm" the swap. But then this afternoon i still got the problem 100% full disk again..The other 2 boxes have no problem.. Strange isnt it… Tried reinstalled the squid same thing 100% swap cache disk full. I even reformat the 1st box same thing 100% disk full cache swap..But the 2 boxes still running and no problem... Anyone?

Thanks,
jigp 1.2.2

mhab12

Looks like it might be time for some people to take a look in the bounty forum…$250 to create a 2.7 stable 6 package.

1.2.3-RC2
built on Sat Sep 5 07:02:34 UTC 2009

this snapshot and widthout lightsquid 'till now and no problem width 100% disk usage. finnaly stable.

i can confirmed this. problem solved.

jigpe

3 boxes here both of them have lightsquid+squid+sg ..but box1 failed and 100% full disk again whew!… 1.2.2

update to last snapshot. it worked 4 me

Correction, do not upgrade to R3!! I have now same problem, because I was bored and upgrade my firmware to R3. S**T

jigpe

Works fine here RC3 downloaded September 23 http://snapshots.pfsense.org/FreeBSD_RELENG_7_2/pfSense_RELENG_1_2/livecd_installer/pfSense-1.2.3-20090923-1717.iso.gz..

I'm still monitoring it. seems like my disk usage is 2% (users: 16)

jigp

i am now using
1.2.3-RC3
built on Mon Sep 21 07:02:42 UTC 2009
3 days is uptime, no crash 'till now

memodan

@Bern:

@hadi57:

i a running pfs 1.2, i updated squid last night, and since my disk usage shows 100% and clients coudnt get lease from dhcp, help really apreciated

I also had this. The quick way - to get you started again - is to:

Stop squid
Get into a root shell on your pfSense box
Run "rm /var/squid/cache/swap.state"
I can't remember if you need to run "squid -z" but there should be no harm in running it.
Start squid

You'll start off with an empty cache but it should start working.

thanks man it's work with me

titus91360

Same problem for. So I stop squid -> rm cache -> Suppress Squid and Reinstall.
All works good but … If I set auth settings to LDAP, squid crashed with an error :

Oct 21 16:19:30 squid[44415]: The basicauthenticator helpers are crashing too rapidly, need help!
Oct 21 16:19:29 squid[37416]: Squid Parent: child process 44415 started
Oct 21 16:19:26 squid[37416]: Squid Parent: child process 37418 exited due to signal 6
Oct 21 16:19:26 kernel: pid 37418 (squid), uid 62: exited on signal 6
Oct 21 16:19:26 squid[37418]: The basicauthenticator helpers are crashing too rapidly, need help!
Oct 21 16:19:26 check_reload_status: reloading filter

Any idea ?

jimp

For good measure (and the archives), this swap.state file will be compacted every night when you run squid -k rotate.

This is run in a cron job on pfSense but only if you specify the number of days to keep squid log files (option "Log rotate").

That is the long term solution to make sure this doesn't recur, it would seem.

i am having this crash again, even width last snapshot and squid 2.7 update.
didn't understand this "compact" is it wish feature or implemented. if it is it doesn't work.