Realtek 8111B
-
its onboard:
biostar GF7100P-M7S
http://www.biostar-usa.com/app/en-us/mb/content.php?S_ID=3121.2.3 release
when it doesnt recognize it, it does the standard interface mismatch and presents one with a list of available interfaces to choose from (same prompt that you get when booting up for the first time)
-
Can you supply the startup output when the system fails to recognise your NIC?
-
you mean like dmesg?
I just reboot it(when it fails to recognize it) and then it recognizes it and boots up fine. -
you mean like dmesg?
Yes.
I just reboot it(when it fails to recognize it) and then it recognizes it and boots up fine.
I presume you reported this because you would like the behaviour to change. Its possible the dmesg (startup) output will contain some clue as to why the NIC is not recognised and that clue might lead to a fix. At the moment there is very little information to work with.
-
ok, will do
-
ok, here it is:
this is when it doesn't recognize the realek:$ dmesg Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE-p5 #0: Sun Dec 6 23:20:31 EST 2009 sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.66GHz (2666.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf47 Stepping = 7 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x651d <sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 2 real memory = 1071579136 (1021 MB) avail memory = 1018007552 (970 MB) ACPI APIC Table: <nvidia nvdaacpi=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/1 [20070320] ioapic0: Changing APIC ID to 4 ioapic0 <version 1.1=""> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <nvidia nvdaacpi=""> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 3fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <power button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 pci0: <memory, ram=""> at device 0.1 (no driver attached) pci0: <memory, ram=""> at device 1.0 (no driver attached) pci0: <memory, ram=""> at device 1.1 (no driver attached) pci0: <memory, ram=""> at device 1.2 (no driver attached) pci0: <memory, ram=""> at device 1.3 (no driver attached) pci0: <memory, ram=""> at device 1.4 (no driver attached) pci0: <memory, ram=""> at device 1.5 (no driver attached) pci0: <memory, ram=""> at device 1.6 (no driver attached) pci0: <memory, ram=""> at device 2.0 (no driver attached) isab0: <pci-isa bridge=""> at device 3.0 on pci0 isa0: <isa bus=""> on isab0 pci0: <serial bus,="" smbus=""> at device 3.1 (no driver attached) pci0: <memory, ram=""> at device 3.2 (no driver attached) pci0: <memory, ram=""> at device 3.4 (no driver attached) ohci0: <ohci (generic)="" usb="" controller=""> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <ohci (generic)="" usb="" controller=""> on ohci0 usb0: USB revision 1.0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <ehci (generic)="" usb="" 2.0="" controller=""> on ehci0 usb1: USB revision 2.0 uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: <nvidia nforce="" mcp73="" udma133="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on pci0 ata0: <ata 0="" channel=""> on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel=""> on atapci0 ata1: [ITHREAD] pcib1: <acpi pci-pci="" bridge=""> at device 10.0 on pci0 pci1: <acpi pci="" bus=""> on pcib1 sis0: <natsemi 10="" dp8381[56]="" 100basetx=""> port 0xbe00-0xbeff mem 0xefaff000-0xefafffff irq 18 at device 6.0 on pci1 sis0: Silicon Revision: DP83815D miibus0: <mii bus=""> on sis0 nsphyter0: <dp83815 10="" 100="" media="" interface=""> PHY 0 on miibus0 nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:02:e3:0a:b2:02 sis0: [ITHREAD] ath0: <atheros 5212=""> mem 0xefae0000-0xefaeffff irq 19 at device 7.0 on pci1 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:1b:2f:2c:b0:75 ath0: mac 7.9 phy 4.5 radio 5.6 pcib2: <acpi pci-pci="" bridge=""> at device 11.0 on pci0 pci2: <acpi pci="" bus=""> on pcib2 pcib3: <acpi pci-pci="" bridge=""> at device 12.0 on pci0 pci3: <acpi pci="" bus=""> on pcib3 pcib4: <acpi pci-pci="" bridge=""> at device 13.0 on pci0 pci4: <acpi pci="" bus=""> on pcib4 re0: <realtek 8168="" 8168b="" 8168c="" 8168cp="" 8168d="" 8111b="" 8111c="" 8111cp="" pcie="" gigabit="" ethernet=""> port 0xce00-0xceff mem 0xefcff000-0xefcfffff irq 16 at device 0.0 on pci4 re0: Using 1 MSI messages re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus1: <mii bus=""> on re0 rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface=""> PHY 1 on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:e0:4d:62:31:01 re0: [FILTER] vgapci0: <vga-compatible display=""> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 23 at device 16.0 on pci0 acpi_tz0: <thermal zone=""> on acpi0 speaker0: <pc speaker=""> port 0x61 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] cpu0: <acpi cpu=""> on acpi0 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 cpu1: <acpi cpu=""> on acpi0 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 pmtimer0 on isa0 orm0: <isa option="" rom=""> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 on isa0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: <american 0="" 2="" 1000="" power="" conversion="" back-ups="" rs="" fw:7.g3="" .d="" usb="" fw:g3,="" class="" 0,="" rev="" 1.10="" 1.06,="" addr=""> on uhub0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. acd0: CDROM <compaq cd-rom="" sc-148e="" b902=""> at ata0-master PIO4 ad1: 38166MB <seagate st340019ace="" 9.51=""> at ata0-slave UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a sis0: Applying short cable fix (reg=f5) sis0: Applying short cable fix (reg=eb) sis0: Applying short cable fix (reg=eb) bridge0: Ethernet address: e6:c2:7b:50:8e:fd sis0: Applying short cable fix (reg=ea) sis0: Applying short cable fix (reg=eb) pflog0: promiscuous mode enabled re0: link state changed to UP ath0: stuck beacon; resetting (bmiss count 4) re0: promiscuous mode enabled re0: promiscuous mode disabled re0: promiscuous mode enabled pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 done All buffers synced. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE-p5 #0: Sun Dec 6 23:20:31 EST 2009 sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.66GHz (2666.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf47 Stepping = 7 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x651d <sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 2 real memory = 1071579136 (1021 MB) avail memory = 1018007552 (970 MB) ACPI APIC Table: <nvidia nvdaacpi=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/1 [20070320] ioapic0: Changing APIC ID to 4 ioapic0 <version 1.1=""> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <nvidia nvdaacpi=""> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 3fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <power button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 pci0: <memory, ram=""> at device 0.1 (no driver attached) pci0: <memory, ram=""> at device 1.0 (no driver attached) pci0: <memory, ram=""> at device 1.1 (no driver attached) pci0: <memory, ram=""> at device 1.2 (no driver attached) pci0: <memory, ram=""> at device 1.3 (no driver attached) pci0: <memory, ram=""> at device 1.4 (no driver attached) pci0: <memory, ram=""> at device 1.5 (no driver attached) pci0: <memory, ram=""> at device 1.6 (no driver attached) pci0: <memory, ram=""> at device 2.0 (no driver attached) isab0: <pci-isa bridge=""> at device 3.0 on pci0 isa0: <isa bus=""> on isab0 pci0: <serial bus,="" smbus=""> at device 3.1 (no driver attached) pci0: <memory, ram=""> at device 3.2 (no driver attached) pci0: <memory, ram=""> at device 3.4 (no driver attached) ohci0: <ohci (generic)="" usb="" controller=""> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <ohci (generic)="" usb="" controller=""> on ohci0 usb0: USB revision 1.0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <ehci (generic)="" usb="" 2.0="" controller=""> on ehci0 usb1: USB revision 2.0 uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: <nvidia nforce="" mcp73="" udma133="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on pci0 ata0: <ata 0="" channel=""> on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel=""> on atapci0 ata1: [ITHREAD] pcib1: <acpi pci-pci="" bridge=""> at device 10.0 on pci0 pci1: <acpi pci="" bus=""> on pcib1 sis0: <natsemi 10="" dp8381[56]="" 100basetx=""> port 0xbe00-0xbeff mem 0xefaff000-0xefafffff irq 18 at device 6.0 on pci1 sis0: Silicon Revision: DP83815D miibus0: <mii bus=""> on sis0 nsphyter0: <dp83815 10="" 100="" media="" interface=""> PHY 0 on miibus0 nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:02:e3:0a:b2:02 sis0: [ITHREAD] ath0: <atheros 5212=""> mem 0xefae0000-0xefaeffff irq 19 at device 7.0 on pci1 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:1b:2f:2c:b0:75 ath0: mac 7.9 phy 4.5 radio 5.6 pcib2: <acpi pci-pci="" bridge=""> at device 11.0 on pci0 pci2: <acpi pci="" bus=""> on pcib2 pcib3: <acpi pci-pci="" bridge=""> at device 12.0 on pci0 pci3: <acpi pci="" bus=""> on pcib3 pcib4: <acpi pci-pci="" bridge=""> at device 13.0 on pci0 pci4: <acpi pci="" bus=""> on pcib4 vgapci0: <vga-compatible display=""> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 23 at device 16.0 on pci0 acpi_tz0: <thermal zone=""> on acpi0 speaker0: <pc speaker=""> port 0x61 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <acpi cpu=""> on acpi0 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 cpu1: <acpi cpu=""> on acpi0 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 pmtimer0 on isa0 orm0: <isa option="" rom=""> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: <american 0="" 2="" 1000="" power="" conversion="" back-ups="" rs="" fw:7.g3="" .d="" usb="" fw:g3,="" class="" 0,="" rev="" 1.10="" 1.06,="" addr=""> on uhub0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. acd0: CDROM <compaq cd-rom="" sc-148e="" b902=""> at ata0-master PIO4 ad1: 38166MB <seagate st340019ace="" 9.51=""> at ata0-slave UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a sis0: Applying short cable fix (reg=f5) sis0: Applying short cable fix (reg=ea) sis0: Applying short cable fix (reg=ea) pflog0: promiscuous mode enabled</seagate></compaq></american></generic></system></isa></cpu></acpi></cpu></acpi></at></keyboard></pc></thermal></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></atheros></dp83815></mii></natsemi></acpi></acpi></ata></ata></nvidia></nvidia></ehci></ehci></nvidia></ohci></ohci></memory,></memory,></serial></isa></pci-isa></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></acpi></acpi></power></high></nvidia></software></version></nvidia></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></seagate></compaq></american></generic></system></at></keyboard></isa></cpu></acpi></cpu></acpi></pc></thermal></vga-compatible></rtl8169s></mii></realtek></acpi></acpi></acpi></acpi></acpi></acpi></atheros></dp83815></mii></natsemi></acpi></acpi></ata></ata></nvidia></nvidia></ehci></ehci></nvidia></ohci></ohci></memory,></memory,></serial></isa></pci-isa></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></acpi></acpi></power></high></nvidia></software></version></nvidia></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>and this is when it does
$ dmesg Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE-p5 #0: Sun Dec 6 23:20:31 EST 2009 sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.66GHz (2666.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf47 Stepping = 7 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x651d <sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 2 real memory = 1071579136 (1021 MB) avail memory = 1018007552 (970 MB) ACPI APIC Table: <nvidia nvdaacpi=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/1 [20070320] ioapic0: Changing APIC ID to 4 ioapic0 <version 1.1=""> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <nvidia nvdaacpi=""> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 3fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <power button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 pci0: <memory, ram=""> at device 0.1 (no driver attached) pci0: <memory, ram=""> at device 1.0 (no driver attached) pci0: <memory, ram=""> at device 1.1 (no driver attached) pci0: <memory, ram=""> at device 1.2 (no driver attached) pci0: <memory, ram=""> at device 1.3 (no driver attached) pci0: <memory, ram=""> at device 1.4 (no driver attached) pci0: <memory, ram=""> at device 1.5 (no driver attached) pci0: <memory, ram=""> at device 1.6 (no driver attached) pci0: <memory, ram=""> at device 2.0 (no driver attached) isab0: <pci-isa bridge=""> at device 3.0 on pci0 isa0: <isa bus=""> on isab0 pci0: <serial bus,="" smbus=""> at device 3.1 (no driver attached) pci0: <memory, ram=""> at device 3.2 (no driver attached) pci0: <memory, ram=""> at device 3.4 (no driver attached) ohci0: <ohci (generic)="" usb="" controller=""> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <ohci (generic)="" usb="" controller=""> on ohci0 usb0: USB revision 1.0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <ehci (generic)="" usb="" 2.0="" controller=""> on ehci0 usb1: USB revision 2.0 uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: <nvidia nforce="" mcp73="" udma133="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on pci0 ata0: <ata 0="" channel=""> on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel=""> on atapci0 ata1: [ITHREAD] pcib1: <acpi pci-pci="" bridge=""> at device 10.0 on pci0 pci1: <acpi pci="" bus=""> on pcib1 sis0: <natsemi 10="" dp8381[56]="" 100basetx=""> port 0xbe00-0xbeff mem 0xefaff000-0xefafffff irq 18 at device 6.0 on pci1 sis0: Silicon Revision: DP83815D miibus0: <mii bus=""> on sis0 nsphyter0: <dp83815 10="" 100="" media="" interface=""> PHY 0 on miibus0 nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:02:e3:0a:b2:02 sis0: [ITHREAD] ath0: <atheros 5212=""> mem 0xefae0000-0xefaeffff irq 19 at device 7.0 on pci1 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:1b:2f:2c:b0:75 ath0: mac 7.9 phy 4.5 radio 5.6 pcib2: <acpi pci-pci="" bridge=""> at device 11.0 on pci0 pci2: <acpi pci="" bus=""> on pcib2 pcib3: <acpi pci-pci="" bridge=""> at device 12.0 on pci0 pci3: <acpi pci="" bus=""> on pcib3 pcib4: <acpi pci-pci="" bridge=""> at device 13.0 on pci0 pci4: <acpi pci="" bus=""> on pcib4 re0: <realtek 8168="" 8168b="" 8168c="" 8168cp="" 8168d="" 8111b="" 8111c="" 8111cp="" pcie="" gigabit="" ethernet=""> port 0xce00-0xceff mem 0xefcff000-0xefcfffff irq 16 at device 0.0 on pci4 re0: Using 1 MSI messages re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus1: <mii bus=""> on re0 rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface=""> PHY 1 on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:e0:4d:62:31:01 re0: [FILTER] vgapci0: <vga-compatible display=""> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 23 at device 16.0 on pci0 acpi_tz0: <thermal zone=""> on acpi0 speaker0: <pc speaker=""> port 0x61 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] cpu0: <acpi cpu=""> on acpi0 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 cpu1: <acpi cpu=""> on acpi0 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 pmtimer0 on isa0 orm0: <isa option="" rom=""> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 on isa0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: <american 0="" 2="" 1000="" power="" conversion="" back-ups="" rs="" fw:7.g3="" .d="" usb="" fw:g3,="" class="" 0,="" rev="" 1.10="" 1.06,="" addr=""> on uhub0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. acd0: CDROM <compaq cd-rom="" sc-148e="" b902=""> at ata0-master PIO4 ad1: 38166MB <seagate st340019ace="" 9.51=""> at ata0-slave UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a sis0: Applying short cable fix (reg=f5) sis0: Applying short cable fix (reg=eb) sis0: Applying short cable fix (reg=eb) bridge0: Ethernet address: e6:c2:7b:50:8e:fd sis0: Applying short cable fix (reg=ea) sis0: Applying short cable fix (reg=eb) pflog0: promiscuous mode enabled re0: link state changed to UP ath0: stuck beacon; resetting (bmiss count 4) re0: promiscuous mode enabled re0: promiscuous mode disabled re0: promiscuous mode enabled pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 done All buffers synced. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE-p5 #0: Sun Dec 6 23:20:31 EST 2009 sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.66GHz (2666.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf47 Stepping = 7 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x651d <sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 2 real memory = 1071579136 (1021 MB) avail memory = 1018007552 (970 MB) ACPI APIC Table: <nvidia nvdaacpi=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/1 [20070320] ioapic0: Changing APIC ID to 4 ioapic0 <version 1.1=""> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <nvidia nvdaacpi=""> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 3fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <power button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 pci0: <memory, ram=""> at device 0.1 (no driver attached) pci0: <memory, ram=""> at device 1.0 (no driver attached) pci0: <memory, ram=""> at device 1.1 (no driver attached) pci0: <memory, ram=""> at device 1.2 (no driver attached) pci0: <memory, ram=""> at device 1.3 (no driver attached) pci0: <memory, ram=""> at device 1.4 (no driver attached) pci0: <memory, ram=""> at device 1.5 (no driver attached) pci0: <memory, ram=""> at device 1.6 (no driver attached) pci0: <memory, ram=""> at device 2.0 (no driver attached) isab0: <pci-isa bridge=""> at device 3.0 on pci0 isa0: <isa bus=""> on isab0 pci0: <serial bus,="" smbus=""> at device 3.1 (no driver attached) pci0: <memory, ram=""> at device 3.2 (no driver attached) pci0: <memory, ram=""> at device 3.4 (no driver attached) ohci0: <ohci (generic)="" usb="" controller=""> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <ohci (generic)="" usb="" controller=""> on ohci0 usb0: USB revision 1.0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <ehci (generic)="" usb="" 2.0="" controller=""> on ehci0 usb1: USB revision 2.0 uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: <nvidia nforce="" mcp73="" udma133="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on pci0 ata0: <ata 0="" channel=""> on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel=""> on atapci0 ata1: [ITHREAD] pcib1: <acpi pci-pci="" bridge=""> at device 10.0 on pci0 pci1: <acpi pci="" bus=""> on pcib1 sis0: <natsemi 10="" dp8381[56]="" 100basetx=""> port 0xbe00-0xbeff mem 0xefaff000-0xefafffff irq 18 at device 6.0 on pci1 sis0: Silicon Revision: DP83815D miibus0: <mii bus=""> on sis0 nsphyter0: <dp83815 10="" 100="" media="" interface=""> PHY 0 on miibus0 nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:02:e3:0a:b2:02 sis0: [ITHREAD] ath0: <atheros 5212=""> mem 0xefae0000-0xefaeffff irq 19 at device 7.0 on pci1 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:1b:2f:2c:b0:75 ath0: mac 7.9 phy 4.5 radio 5.6 pcib2: <acpi pci-pci="" bridge=""> at device 11.0 on pci0 pci2: <acpi pci="" bus=""> on pcib2 pcib3: <acpi pci-pci="" bridge=""> at device 12.0 on pci0 pci3: <acpi pci="" bus=""> on pcib3 pcib4: <acpi pci-pci="" bridge=""> at device 13.0 on pci0 pci4: <acpi pci="" bus=""> on pcib4 vgapci0: <vga-compatible display=""> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 23 at device 16.0 on pci0 acpi_tz0: <thermal zone=""> on acpi0 speaker0: <pc speaker=""> port 0x61 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <acpi cpu=""> on acpi0 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 cpu1: <acpi cpu=""> on acpi0 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 pmtimer0 on isa0 orm0: <isa option="" rom=""> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: <american 0="" 2="" 1000="" power="" conversion="" back-ups="" rs="" fw:7.g3="" .d="" usb="" fw:g3,="" class="" 0,="" rev="" 1.10="" 1.06,="" addr=""> on uhub0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. acd0: CDROM <compaq cd-rom="" sc-148e="" b902=""> at ata0-master PIO4 ad1: 38166MB <seagate st340019ace="" 9.51=""> at ata0-slave UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a sis0: Applying short cable fix (reg=f5) sis0: Applying short cable fix (reg=ea) sis0: Applying short cable fix (reg=ea) pflog0: promiscuous mode enabled pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done All buffers synced. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE-p5 #0: Sun Dec 6 23:20:31 EST 2009 sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.7 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.66GHz (2666.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf47 Stepping = 7 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x651d <sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 2 real memory = 1071579136 (1021 MB) avail memory = 1018007552 (970 MB) ACPI APIC Table: <nvidia nvdaacpi=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero address or length: 0 0/1 [20070320] ioapic0: Changing APIC ID to 4 ioapic0 <version 1.1=""> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <nvidia nvdaacpi=""> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 3fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <power button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 pci0: <memory, ram=""> at device 0.1 (no driver attached) pci0: <memory, ram=""> at device 1.0 (no driver attached) pci0: <memory, ram=""> at device 1.1 (no driver attached) pci0: <memory, ram=""> at device 1.2 (no driver attached) pci0: <memory, ram=""> at device 1.3 (no driver attached) pci0: <memory, ram=""> at device 1.4 (no driver attached) pci0: <memory, ram=""> at device 1.5 (no driver attached) pci0: <memory, ram=""> at device 1.6 (no driver attached) pci0: <memory, ram=""> at device 2.0 (no driver attached) isab0: <pci-isa bridge=""> at device 3.0 on pci0 isa0: <isa bus=""> on isab0 pci0: <serial bus,="" smbus=""> at device 3.1 (no driver attached) pci0: <memory, ram=""> at device 3.2 (no driver attached) pci0: <memory, ram=""> at device 3.4 (no driver attached) ohci0: <ohci (generic)="" usb="" controller=""> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <ohci (generic)="" usb="" controller=""> on ohci0 usb0: USB revision 1.0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <ehci (generic)="" usb="" 2.0="" controller=""> on ehci0 usb1: USB revision 2.0 uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usb1 uhub1: 10 ports with 10 removable, self powered atapci0: <nvidia nforce="" mcp73="" udma133="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on pci0 ata0: <ata 0="" channel=""> on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel=""> on atapci0 ata1: [ITHREAD] pcib1: <acpi pci-pci="" bridge=""> at device 10.0 on pci0 pci1: <acpi pci="" bus=""> on pcib1 sis0: <natsemi 10="" dp8381[56]="" 100basetx=""> port 0xbe00-0xbeff mem 0xefaff000-0xefafffff irq 18 at device 6.0 on pci1 sis0: Silicon Revision: DP83815D miibus0: <mii bus=""> on sis0 nsphyter0: <dp83815 10="" 100="" media="" interface=""> PHY 0 on miibus0 nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:02:e3:0a:b2:02 sis0: [ITHREAD] ath0: <atheros 5212=""> mem 0xefae0000-0xefaeffff irq 19 at device 7.0 on pci1 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:1b:2f:2c:b0:75 ath0: mac 7.9 phy 4.5 radio 5.6 pcib2: <acpi pci-pci="" bridge=""> at device 11.0 on pci0 pci2: <acpi pci="" bus=""> on pcib2 pcib3: <acpi pci-pci="" bridge=""> at device 12.0 on pci0 pci3: <acpi pci="" bus=""> on pcib3 pcib4: <acpi pci-pci="" bridge=""> at device 13.0 on pci0 pci4: <acpi pci="" bus=""> on pcib4 re0: <realtek 8168="" 8168b="" 8168c="" 8168cp="" 8168d="" 8111b="" 8111c="" 8111cp="" pcie="" gigabit="" ethernet=""> port 0xce00-0xceff mem 0xefcff000-0xefcfffff irq 16 at device 0.0 on pci4 re0: Using 1 MSI messages re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus1: <mii bus=""> on re0 rgephy0: <rtl8169s 8110s="" 8211b="" media="" interface=""> PHY 1 on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:e0:4d:62:31:01 re0: [FILTER] vgapci0: <vga-compatible display=""> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 23 at device 16.0 on pci0 acpi_tz0: <thermal zone=""> on acpi0 speaker0: <pc speaker=""> port 0x61 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <acpi cpu=""> on acpi0 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 cpu1: <acpi cpu=""> on acpi0 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 pmtimer0 on isa0 orm0: <isa option="" rom=""> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ugen0: <american 0="" 2="" 1000="" power="" conversion="" back-ups="" rs="" fw:7.g3="" .d="" usb="" fw:g3,="" class="" 0,="" rev="" 1.10="" 1.06,="" addr=""> on uhub0 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. acd0: CDROM <compaq cd-rom="" sc-148e="" b902=""> at ata0-master PIO4 ad1: 38166MB <seagate st340019ace="" 9.51=""> at ata0-slave UDMA100 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a sis0: Applying short cable fix (reg=f6) sis0: Applying short cable fix (reg=e8) sis0: Applying short cable fix (reg=e7) pflog0: promiscuous mode enabled re0: promiscuous mode enabled re0: promiscuous mode disabled re0: promiscuous mode enabled sis0: Applying short cable fix (reg=e8) re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP bridge0: Ethernet address: 7e:0c:65:ee:ac:66 sis0: Applying short cable fix (reg=e9) ath0: promiscuous mode enabled sis0: Applying short cable fix (reg=e8) sis0: promiscuous mode enabled</seagate></compaq></american></generic></system></isa></cpu></acpi></cpu></acpi></at></keyboard></pc></thermal></vga-compatible></rtl8169s></mii></realtek></acpi></acpi></acpi></acpi></acpi></acpi></atheros></dp83815></mii></natsemi></acpi></acpi></ata></ata></nvidia></nvidia></ehci></ehci></nvidia></ohci></ohci></memory,></memory,></serial></isa></pci-isa></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></acpi></acpi></power></high></nvidia></software></version></nvidia></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></seagate></compaq></american></generic></system></isa></cpu></acpi></cpu></acpi></at></keyboard></pc></thermal></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></atheros></dp83815></mii></natsemi></acpi></acpi></ata></ata></nvidia></nvidia></ehci></ehci></nvidia></ohci></ohci></memory,></memory,></serial></isa></pci-isa></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></acpi></acpi></power></high></nvidia></software></version></nvidia></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe></seagate></compaq></american></generic></system></at></keyboard></isa></cpu></acpi></cpu></acpi></pc></thermal></vga-compatible></rtl8169s></mii></realtek></acpi></acpi></acpi></acpi></acpi></acpi></atheros></dp83815></mii></natsemi></acpi></acpi></ata></ata></nvidia></nvidia></ehci></ehci></nvidia></ohci></ohci></memory,></memory,></serial></isa></pci-isa></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></memory,></acpi></acpi></power></high></nvidia></software></version></nvidia></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,tm2,cnxt-id,cx16,xtpr></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> -
Thanks for the dmesg output. I thought that there might have been an error found during the re device attach processing on startup but that is not the case here. Rather it looks as if the device is sometimes not seen during startup. It appears the re is a PCI Express device in which case the PCI Express serial link between the device and its upstream bridge needs to be initialised before the device is visible to the CPU.
I suggest you look on the Biostar support web pages to see if there any sort of fix for this problem (e.g. maybe the BIOS needs to wait a little longer to allow the PCI Express link to come up) or if its a known but won't be fixed problem (e.g. bug in the NIC silicon). It might also be worth looking through Google to see if ohters have seen a similar problem.
-
your welcome, thanks for the help.
according to biostar it is a PCIE device. when i find out i will update.
also is there a way to force a reboot if it doesnt detect the nic?
-
they have requested that I reinstall the driver…how does one reinstall the driver?
-
they have requested that I reinstall the driver…how does one reinstall the driver?
One doesn't - the driver is built into the kernel.
-
One doesn't - the driver is built into the kernel.
Thats what I thought, and thats what I told them.
-
well I had to redo the system for an unrelated problem (just restored to default) and it went away.
-
Problems like that which spontaneously go away leave me suspicious that they will spontaneously come back.
-
by it going away i mean the it doesnt appear on every other reboot like it did, when it goes away it is replaced with error messages that say that nothing was properly dismount and then it cleans the file system then continues to boot, dont know why though.
I dont reboot that often so I am not sure if it is an issues -
update: I think it had to do with the fact that I was cloning a MAC address before and am no longer do so at the present moment. I no longer have any file system error messages either, so i think that the realtek just had problems accepting a different MAC.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.