Creating pfSense 2.0 Developers ISO on FreeBSD Beta 8.1

[jimp]

That doesn't look familiar, but rejected patches are usually a sign that your source tree doesn't match up with what is expected, or that something was updated upstream (in FreeBSD) and the patches on pfSense may need adjusted.

What settings did you use when you set the version to build?

The contents of /home/pfsense/tools/builder-scripts/pfsense-build.conf would help.

[trijames]

Hi Jimp,

thanks. 
just fyi… I ended up using freebsd 8.1 RC1 as my base.
Then i run through the steps as outlined.
The version I set is RELENG_8_1...
But it seems that my FREEBSD_BRANCH is 8_0 as shown below...
Is there something wrong with that?

Here's my pfsense-build.conf below.

export PFSENSE_VERSION=2.0-BETA3
export FREEBSD_VERSION=8
export FREEBSD_BRANCH=RELENG_8_0
export PFSENSETAG=HEAD
export PFSPATCHFILE=/usr/home/pfsense/tools/builder_scripts/../builder_scripts/patches.RELENG_8_1
export PFSPATCHDIR=/usr/home/pfsense/tools/builder_scripts/../patches/RELENG_8_1
export SUPFILE=/usr/home/pfsense/tools/builder_scripts/../builder_scripts/RELENG_8-supfile
export CUSTOM_COPY_LIST=/usr/home/pfsense/tools/builder_scripts/../builder_scripts/copy.list.RELENG_8_0
export OVERRIDE_FREEBSD_CVSUP_HOST=cvsup4.us.freebsd.org
export BASE_DIR=/usr/home/pfsense/tools/builder_scripts/../..
export BUILDER_TOOLS=/usr/home/pfsense/tools/builder_scripts/..
export BUILDER_SCRIPTS=/usr/home/pfsense/tools/builder_scripts
export PFSPORTSFILE=buildports.RELENG_2_0
freebsd81rc1386#

[jimp]

No that all looks right. Some things are named 8_0 and haven't been renamed to 8_1 yet, but they work for any 8, not just 8_0.

[trijames]

hi Jimp,

interesting… I wonder why it's not working...
here's the full text of the error I'm getting during apply-kernel-patches.sh
If you have any ideas - I'm more than happy to try it out...

Setting CVSUp host to cvsup4.us.freebsd.org
Removing needed files listed in patches.RELENG_8_1 HEAD
Obtaining FreeBSD sources RELENG_8-supfile...Done!
Removing old patch rejects...
Applying patches, please wait...Hunk #1 failed at 1637.
Hunk #2 failed at 1669.
2 out of 2 hunks failed--saving rejects to sys/net/if.c.rej
Hunk #1 failed at 875.
1 out of 1 hunks failed--saving rejects to sys/net/if_var.h.rej
Hunk #1 failed at 519.
Hunk #2 failed at 686.
Hunk #3 failed at 797.
3 out of 3 hunks failed--saving rejects to sys/net/route.c.rej
Hunk #1 failed at 55.
Hunk #2 failed at 674.
2 out of 2 hunks failed--saving rejects to sys/net/rtsock.c.rej
Hunk #1 failed at 1379.
1 out of 1 hunks failed--saving rejects to sys/netinet/in.c.rej
Hunk #1 failed at 590.
Hunk #2 failed at 707.
2 out of 2 hunks failed--saving rejects to sys/netinet/in_pcb.c.rej
Hunk #1 failed at 230.
1 out of 1 hunks failed--saving rejects to sys/netinet/ip_options.c.rej
Hunk #1 failed at 247.
1 out of 1 hunks failed--saving rejects to sys/netinet/ip_output.c.rej
Done!
Finding patch rejects...

WARNING!  Rejected patches found!  Please fix before building!

/usr/pfSensesrc/src/sys/net/if.c.rej
/usr/pfSensesrc/src/sys/net/if_var.h.rej
/usr/pfSensesrc/src/sys/net/route.c.rej
/usr/pfSensesrc/src/sys/net/rtsock.c.rej
/usr/pfSensesrc/src/sys/netinet/in.c.rej
/usr/pfSensesrc/src/sys/netinet/in_pcb.c.rej
/usr/pfSensesrc/src/sys/netinet/ip_options.c.rej
/usr/pfSensesrc/src/sys/netinet/ip_output.c.rej

####################################
Something went wrong, check errors!
####################################

[trijames]

Hi Jimp,

in case it helps - here's exactly the steps I'm doing:

1.) install freebsd 8.1 RC1

2.) update the kernel source with csup
2a.) copy the supfile to the /etc

cp /usr/share/examples/cvsup/standard-supfile /etc/supfile

2b.) edit the supfile

vi /etc/supfile

2c.) add the csup server
host=CHANGE_THIS.FreeBSD.org
Change to:
host=cvsup4.us.FreeBSD.org
2d.) run csup
#> csup /etc/supfile

3.) build the kernel

cd /usr/src

make buildworld

make buildkernel

make installkernel

shutdown -r now

4.) boot into single user mode

boot -s from the boot loader prompt

adjkerntz -i

mount -a -t ufs

mergemaster -p

cd /usr/src

make installworld

mergemaster

reboot

5.) update the ports directory using csup

rm -fr /usr/ports/*

csup -L 2 /etc/supfile

6.) configure make (step 1 from devwiki.pfsense/org/DevelopersBootStrapAndevIso)

echo "WITHOUT_X11=yo" >> /etc/make.conf

mkdir -p /home/pfsense/pfSenseGITREPO /home/pfsense/installer /usr/pfSensesrc

7.) grab ports and build GIT

portsnap fetch extract

cd /usr/ports/textproc/expat2 && make depends install

cd /usr/ports/devel/git && make depends install

(take the standard default settings from the menu's)

cd /usr/ports/sysutils/fastest_cvsup/ && make depends install

(take the standard default settings from the menu's)

rehash

8.) continue on with the GIT repo checkouts

cd /home/pfsense && git clone http://gitweb.pfsense.org/pfsense-tools/mainline.git tools

cd /home/pfsense && git clone http://gitweb.pfsense.org/freesbie2/mainline.git freesbie2

cd /home/pfsense/tools/builder_scripts && chmod a+rx *.sh

9.) now do the pfsense stuff

cd /home/pfsense/tools/builder_scripts

./set_version.sh RELENG_8_1 cvsup4.us.freebsd.org

./apply_kernel_patches.sh

(here's where I get the reject errors…)

(the rest I don't get to because of the above errors)

cd /home/pfsense/tools/pfPorts/php5; make all install clean

cd /home/pfsense/tools/pfPorts/php5-pfSense-module/; make all install clean

cd /usr/ports/devel/readline/; make all install clean

10 now create the ISO

cd/ home/pfsense/tools/builder_scripts

./build_iso.sh

[trijames]

Hi Jimp,

one more thing - I'm building this as a VM… could that be the cause?

regards
TJ

[jimp]

VM is fine, nothing wrong with that.

Just checked on our main snapshot builder and the patches are failing there, too, so it must be an upstream update that happened.

EDIT: I restarted the build and it worked. Try updating the sources, git repos, etc, and then make another attempt.

[trijames]

Hi Jimp,

ok I guess that's good news - and will get fixed soon. 
What I notice is that the errors are all related to the tcp stack
ip.c
route.c
rtsock.c
etc…

So, would seem to me that something has changed there.
What does it mean when these are "rejects"?  Is it basically a 'diff' that found between the freebsd baseline and pfrsense baseline?

regards
TJ

[trijames]

Oh - I just saw your updated EDIT…
Ok - I'll try to update and see if that works...
Which source should I update?  kernel? or pfsense? or both?

regards
TJ

[jimp]

Try this:

# cd/ home/pfsense/tools/builder_scripts
# ./update_git_repos.sh
# ./build_iso.sh

[trijames]

Jimp,

not sure if I understand…
Just in case - I want to check my thinking:
1.) should I not do the following:
  # ./apply_kernel_patches.sh
  # cd /home/pfsense/tools/pfPorts/php5; make all install clean
  # cd /home/pfsense/tools/pfPorts/php5-pfSense-module/; make all install clean
  # cd /usr/ports/devel/readline/; make all install clean

So even though apply_kernel_patches.sh failed - I should instead do update_git_repos.sh?
And also skip the rest?  Is that right?

Or should I still do the above steps and then also do the update_git_repos.sh?

regards
TJ

[jimp]

Whatever you do, do update_git_repos.sh first. I'd just try to build the iso first and see what happens. It should do some of that automatically, but if it fails, then fall back to doing those steps (apply patches, build those ports, etc)

Though you can compile those ports whether or not the kernel patches apply

[trijames]

ah ok - excellent.  I'll give that a try.

[jimp]

That didn't work. I had to adjust the supfile to have a date, and go back a few days. If you update_git_repos.sh again and then redo the build it should succeed.

[trijames]

Jimp,

does it matter which which shell I use to run these?
I just saw a warning about ksh as below in the build_iso.sh

"the O_NONBLOCK symbol with a syntax error.  This is apparently a
sh error.  Rerunning Configure with ksh apparently fixes the
error, then please read the section "64 bit data in perl 5.6.0 and 5.6.1"

(I'm building the i386 version)

regards
TJ

[trijames]

Hi Jimp,

I am getting the following errors when running build_iso.sh - but it continues to run…
Did I forget a step?

ERROR Building dnsmasq
ERROR Building php5-curl
ERROR Building php5-mhash
ERROR Building php5-pcre
ERROR Building php5-pfSense-module
ERROR Building php5-readline
ERROR Building syslog-ng
ERROR Building 3gstat_um175
ERROR Building wrapalixresetbutton

[trijames]

Hi Jimp,

one more post …

at the end of build_iso.sh - I still get the error.
(sorry about all the posts...)

WARNING!  Rejected patches found!  Please fix before building!

/usr/pfSensesrc/src/sys/net/if.c.rej
/usr/pfSensesrc/src/sys/net/if_var.h.rej
/usr/pfSensesrc/src/sys/net/route.c.rej
/usr/pfSensesrc/src/sys/net/rtsock.c.rej
/usr/pfSensesrc/src/sys/netinet/in.c.rej
/usr/pfSensesrc/src/sys/netinet/in_pcb.c.rej
/usr/pfSensesrc/src/sys/netinet/ip_options.c.rej
/usr/pfSensesrc/src/sys/netinet/ip_output.c.rej

[jimp]

Not sure what is up with those port building errors, especially the wrapalixresetbutton port as that is very simple and should not fail. You might try to make that one by hand to see what the actual error is:

# cd tools/pfPorts/wrapalixresetbutton/; make all

As for those rejects, they may be leftover from when they did fail. You might need to run:

# ./clean_build.sh

[trijames]

Hi Jimp,

thanks.
I went ahead and tried to compile each of the failed builds by hand.

1.) dnsmasq built fine
2.) php5-curl did not (see below - looks like it is expecting curl5)
3.) php5-mhash built fine
4.) php5-pcre built fine
5.) php5-pfSense-module built fine
6.) php5-readline module failed (see below)

=== php5-curl build errors ===
freebsd81rc1386# cd php5-curl/
freebsd81rc1386# make all
===>  Vulnerability check disabled, database not found
===>  License check disabled, port has not defined LICENSE
===>  Extracting for php52-curl-5.2.13
=> MD5 Checksum OK for php-5.2.13.tar.bz2.
=> SHA256 Checksum OK for php-5.2.13.tar.bz2.
===>  Patching for php52-curl-5.2.13
===>  php52-curl-5.2.13 depends on file: /usr/local/bin/phpize - found
===>  php52-curl-5.2.13 depends on file: /usr/local/bin/autoconf-2.62 - found
===>  php52-curl-5.2.13 depends on shared library: curl.5 - not found
===>    Verifying install for curl.5 in /usr/ports/ftp/curl
===>  Returning to build of php52-curl-5.2.13
Error: shared library "curl.5" does not exist
*** Error code 1

Stop in /usr/home/pfsense/tools/pfPorts/php5-curl.

=== php5-readline build error ====
===>  Script "configure" failed unexpectedly.
Please report the problem to admin@lissyara.su [maintainer] and attach the
"/usr/home/pfsense/tools/pfPorts/php5-readline/work/php-5.2.13/ext/readline/config.log"
including the output of the failure of your make command. Also, it might be
a good idea to provide an overview of all packages installed on your system
(e.g. an ls /var/db/pkg).
*** Error code 1

[jimp]

Did you ever go back and try to install readline on its own?

cd /usr/ports/devel/readline/; make all install clean

You might have to do the same with curl:

cd /usr/ports/ftp/curl; make all install clean