Creating pfSense 2.0 Developers ISO on FreeBSD Beta 8.1

[jimp]

VM is fine, nothing wrong with that.

Just checked on our main snapshot builder and the patches are failing there, too, so it must be an upstream update that happened.

EDIT: I restarted the build and it worked. Try updating the sources, git repos, etc, and then make another attempt.

[trijames]

Hi Jimp,

ok I guess that's good news - and will get fixed soon. 
What I notice is that the errors are all related to the tcp stack
ip.c
route.c
rtsock.c
etc…

So, would seem to me that something has changed there.
What does it mean when these are "rejects"?  Is it basically a 'diff' that found between the freebsd baseline and pfrsense baseline?

regards
TJ

[trijames]

Oh - I just saw your updated EDIT…
Ok - I'll try to update and see if that works...
Which source should I update?  kernel? or pfsense? or both?

regards
TJ

[jimp]

Try this:

# cd/ home/pfsense/tools/builder_scripts
# ./update_git_repos.sh
# ./build_iso.sh

[trijames]

Jimp,

not sure if I understand…
Just in case - I want to check my thinking:
1.) should I not do the following:
  # ./apply_kernel_patches.sh
  # cd /home/pfsense/tools/pfPorts/php5; make all install clean
  # cd /home/pfsense/tools/pfPorts/php5-pfSense-module/; make all install clean
  # cd /usr/ports/devel/readline/; make all install clean

So even though apply_kernel_patches.sh failed - I should instead do update_git_repos.sh?
And also skip the rest?  Is that right?

Or should I still do the above steps and then also do the update_git_repos.sh?

regards
TJ

[jimp]

Whatever you do, do update_git_repos.sh first. I'd just try to build the iso first and see what happens. It should do some of that automatically, but if it fails, then fall back to doing those steps (apply patches, build those ports, etc)

Though you can compile those ports whether or not the kernel patches apply

[trijames]

ah ok - excellent.  I'll give that a try.

[jimp]

That didn't work. I had to adjust the supfile to have a date, and go back a few days. If you update_git_repos.sh again and then redo the build it should succeed.

[trijames]

Jimp,

does it matter which which shell I use to run these?
I just saw a warning about ksh as below in the build_iso.sh

"the O_NONBLOCK symbol with a syntax error.  This is apparently a
sh error.  Rerunning Configure with ksh apparently fixes the
error, then please read the section "64 bit data in perl 5.6.0 and 5.6.1"

(I'm building the i386 version)

regards
TJ

[trijames]

Hi Jimp,

I am getting the following errors when running build_iso.sh - but it continues to run…
Did I forget a step?

ERROR Building dnsmasq
ERROR Building php5-curl
ERROR Building php5-mhash
ERROR Building php5-pcre
ERROR Building php5-pfSense-module
ERROR Building php5-readline
ERROR Building syslog-ng
ERROR Building 3gstat_um175
ERROR Building wrapalixresetbutton

[trijames]

Hi Jimp,

one more post …

at the end of build_iso.sh - I still get the error.
(sorry about all the posts...)

WARNING!  Rejected patches found!  Please fix before building!

/usr/pfSensesrc/src/sys/net/if.c.rej
/usr/pfSensesrc/src/sys/net/if_var.h.rej
/usr/pfSensesrc/src/sys/net/route.c.rej
/usr/pfSensesrc/src/sys/net/rtsock.c.rej
/usr/pfSensesrc/src/sys/netinet/in.c.rej
/usr/pfSensesrc/src/sys/netinet/in_pcb.c.rej
/usr/pfSensesrc/src/sys/netinet/ip_options.c.rej
/usr/pfSensesrc/src/sys/netinet/ip_output.c.rej

[jimp]

Not sure what is up with those port building errors, especially the wrapalixresetbutton port as that is very simple and should not fail. You might try to make that one by hand to see what the actual error is:

# cd tools/pfPorts/wrapalixresetbutton/; make all

As for those rejects, they may be leftover from when they did fail. You might need to run:

# ./clean_build.sh

[trijames]

Hi Jimp,

thanks.
I went ahead and tried to compile each of the failed builds by hand.

1.) dnsmasq built fine
2.) php5-curl did not (see below - looks like it is expecting curl5)
3.) php5-mhash built fine
4.) php5-pcre built fine
5.) php5-pfSense-module built fine
6.) php5-readline module failed (see below)

=== php5-curl build errors ===
freebsd81rc1386# cd php5-curl/
freebsd81rc1386# make all
===>  Vulnerability check disabled, database not found
===>  License check disabled, port has not defined LICENSE
===>  Extracting for php52-curl-5.2.13
=> MD5 Checksum OK for php-5.2.13.tar.bz2.
=> SHA256 Checksum OK for php-5.2.13.tar.bz2.
===>  Patching for php52-curl-5.2.13
===>  php52-curl-5.2.13 depends on file: /usr/local/bin/phpize - found
===>  php52-curl-5.2.13 depends on file: /usr/local/bin/autoconf-2.62 - found
===>  php52-curl-5.2.13 depends on shared library: curl.5 - not found
===>    Verifying install for curl.5 in /usr/ports/ftp/curl
===>  Returning to build of php52-curl-5.2.13
Error: shared library "curl.5" does not exist
*** Error code 1

Stop in /usr/home/pfsense/tools/pfPorts/php5-curl.

=== php5-readline build error ====
===>  Script "configure" failed unexpectedly.
Please report the problem to admin@lissyara.su [maintainer] and attach the
"/usr/home/pfsense/tools/pfPorts/php5-readline/work/php-5.2.13/ext/readline/config.log"
including the output of the failure of your make command. Also, it might be
a good idea to provide an overview of all packages installed on your system
(e.g. an ls /var/db/pkg).
*** Error code 1

[jimp]

Did you ever go back and try to install readline on its own?

cd /usr/ports/devel/readline/; make all install clean

You might have to do the same with curl:

cd /usr/ports/ftp/curl; make all install clean

[trijames]

Hi Jimp,

yes I did - sorry I accidentally omitted that in the earlier post.
I did manually build readline - and it built fine - no issues.
I'm going to try and manually build all the packages that failed - and see what the error is.
Hopefully that can produce some new findings.

So, my understanding is
1.) run clean_build.sh
2.) run apply_kernel_patches.sh
3.) then for all that failed - manually build each of those packages
4.) if errors from manual build - check errors to try and resolve…

Sound good?  Or am I missing something here?

[jimp]

Sounds about right, though usually it isn't that complicated. Not sure why so many things are failing there.

[trijames]

Jimp,

so maybe there is something wrong with the procedure I've listed.
Can you check it through?
Maybe I have some of the steps in the wrong order (in particular the later steps)?

1.) install freebsd 8.1 RC1

2.) update the kernel source with csup
(taken from http://www.freebsd.org/doc/en/books/handbook/makeworld.html)

2a.) copy the supfile to the /etc

cp /usr/share/examples/cvsup/standard-supfile /etc/supfile

2b.) edit the supfile

vi /etc/supfile

2c.) add the csup server
host=CHANGE_THIS.FreeBSD.org
Change to:
host=cvsup4.us.FreeBSD.org
2d.) run csup
#> csup /etc/supfile

3.) build the kernel

cd /usr/src

make buildworld

make buildkernel

make installkernel

shutdown -r now

4.) boot into single user mode

boot -s from the boot loader prompt

adjkerntz -i

mount -a -t ufs

mergemaster -p

cd /usr/src

make installworld

mergemaster

reboot

5.) update the ports directory using csup

rm -fr /usr/ports/*

csup -L 2 /etc/supfile

6.) configure make (step 1 from devwiki.pfsense/org/DevelopersBootStrapAndevIso)

echo "WITHOUT_X11=yo" >> /etc/make.conf

mkdir -p /home/pfsense/pfSenseGITREPO /home/pfsense/installer /usr/pfSensesrc

7.) grab ports and build GIT

portsnap fetch extract

cd /usr/ports/textproc/expat2 && make depends install

cd /usr/ports/devel/git && make depends install

(take the standard default settings from the menu's)

cd /usr/ports/sysutils/fastest_cvsup/ && make depends install

(take the standard default settings from the menu's)

rehash

8.) continue on with the GIT repo checkouts

cd /home/pfsense && git clone http://gitweb.pfsense.org/pfsense-tools/mainline.git tools

cd /home/pfsense && git clone http://gitweb.pfsense.org/freesbie2/mainline.git freesbie2

cd /home/pfsense/tools/builder_scripts && chmod a+rx *.sh

9.) now do the pfsense stuff

cd /home/pfsense/tools/builder_scripts

./set_version.sh RELENG_8_1 cvsup4.us.freebsd.org

# ./clean_build.sh

./apply_kernel_patches.sh

(here's where I get the reject errors…)

./update_git_repos.sh

(the below items might need to be manually built for anything that failed - E.G.: )

cd /home/pfsense/tools/pfPorts/php5; make all install clean

cd /home/pfsense/tools/pfPorts/php5-pfSense-module/; make all install clean

cd /usr/ports/devel/readline/; make all install clean

# cd /usr/ports/curl; make all install clean

./build_iso.sh

[kpa]

About point 5.), I think you need to use cvs tag "." instead of "RELENG_8_1" for fetching ports, /usr/bin/csup -h cvsup.uk.FreeBSD.org
/usr/share/examples/cvsup/ports-supfile should do the job (replace cvsup.uk with a mirror close to you).

[jimp]

@kpa:

About point 5.), I think you need to use cvs tag "." instead of "RELENG_8_1" for fetching ports, /usr/bin/csup -h cvsup.uk.FreeBSD.org
/usr/share/examples/cvsup/ports-supfile should do the job (replace cvsup.uk with a mirror close to you).

He's using portsnap to get the ports, that supfile was just for the system sources (though since it was done earlier, it doesn't need to be done again)

[jimp]

I also noticed that I used this:

./set_version.sh HEAD