RRD Graphs
-
I have e-mailed you my config to see if something is a miss.
-
Do the graphs work if you use the pfsense_ng theme instead of the_wall like you have set?
I didn't see anything that jumped out at me in that config as being wrong for rrds, but I know that some of the themes have their own RRD colors and such that might not be working properly.
-
I too have this issue. applying the patch listed back in July though …. does solve the issue for me.
however the Traffic Graphs do not function for me.
I have tested it with the brand new build .... -
OMG - you killed the Status: Traffic Graph !!!
2.0-BETA4 (i386) built on Thu Aug 12 07:38:24 EDT 2010 FreeBSD 8.1-RELEASE
Also you can see this on the pfSense Dashboard.
Not sure when this happened over the past couple/few days.
Regards…Martin
-
the gettext import has caused quite a bit of fallout, RRD and SVG graphs currently broken.
-
Yesterday 08/11/2010 the snapshot update has really broken RRD Graphs here.
Today runing 2.0-BETA4 (i386) built on Thu Aug 12 05:28:01 EDT 2010 the RRD Graph is working
with defaults.
No RRD graphs for themes… but it's working.
Still, you can change color graph editing status_rrd_graph_img.php
As always, just do it if you know what you're doing.
-
Right I have just got the lastest snapshot the Traffic graphs on the dashboard are not working as yet but the RRD graphs I have the quality working there was a 2 minutes worth on the system then stopped and nothing on the traffic.
I also changed to the suggested theme with no luck.
Sys log dump
Aug 13 09:30:37 kernel: timecounter TSC must not be in use when changing frequencies; change denied
Aug 13 09:30:37 last message repeated 7 times
Aug 13 09:30:33 php: /status_rrd_graph_img.php: rrdcolors.inc.php for theme pfsense_ng does not exist, using defaults!
Aug 13 09:30:33 kernel: timecounter TSC must not be in use when changing frequencies; change denied
Aug 13 09:30:32 last message repeated 3 times
Aug 13 09:30:31 php: /status_rrd_graph_img.php: rrdcolors.inc.php for theme pfsense_ng does not exist, using defaults!
Aug 13 09:30:30 kernel: timecounter TSC must not be in use when changing frequencies; change denied
Aug 13 09:30:30 php: /status_rrd_graph_img.php: rrdcolors.inc.php for theme pfsense_ng does not exist, using defaults!
Aug 13 09:30:30 kernel: timecounter TSC must not be in use when changing frequencies; change denied
Aug 13 09:30:30 kernel: timecounter TSC must not be in use when changing frequencies; change denied
Aug 13 09:30:30 php: /status_rrd_graph_img.php: rrdcolors.inc.php for theme pfsense_ng does not exist, using defaults! -
Is there any resolution for this in my case?
-
At the moment I think there are once again some issues with RRDs in general, so it may not be just you. I haven't tried a snap from today but late last week there were several reports that things weren't working right in the GUI. The graph data files were being updated but not drawn properly.
-
Do you know when this is scheduled to be fixed.
-
This appeared to be specific to people that used openvpn tunnels. This caused the updated process to hang.
This is now fixed.
-
Well, the Processor Graph doesn't work with 2.0-BETA4 (i386) built on Thu Aug 26 09:00:28 EDT 2010 snapshot.
All other graphs are working but there's still Error for Themes (using defaults). -
The error about colors being missing from themes should be fixed, I committed something earlier today for it.
-
Wahay nice to see it back.
-
Well, the Processor Graph doesn't work with 2.0-BETA4 (i386) built on Thu Aug 26 09:00:28 EDT 2010 snapshot.
All other graphs are working but there's still Error for Themes (using defaults).What platform are you on? I seem to be hunting subtle differences between various versions of top where the output is shifted 1 field and then doesn't produce any data.
If other people are also seeing empty processor graphs I need to know if it is a VM and what sort of hardware you are on. E.g. uni processor, smp, embedded.
-
What platform are you on? I seem to be hunting subtle differences between various versions of top where the output is shifted 1 field and then doesn't produce any data.
If other people are also seeing empty processor graphs I need to know if it is a VM and what sort of hardware you are on. E.g. uni processor, smp, embedded.
Practically no RRD graphs are showing on my box. RRD graphs sometimes work with some snaps and not with others - but my current snap:
uname -a FreeBSD X.X.X.X 8.1-RELEASE FreeBSD 8.1-RELEASE #1: Mon Aug 23 04:03:47 EDT 2010 sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386doesn't work for RRD.
Here's dmesg, since you need hardware details:
dmesg Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #1: Mon Aug 23 04:03:47 EDT 2010 sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2675.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2075967488 (1979 MB) ACPI APIC Table: <shuttl shuttle=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <version 2.0=""> irqs 0-23 on motherboard ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc072c120, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc072c1e0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc072c2a0, 0) error 1 wlan: mac acl policy registered wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xc08ff2b0, 0) error 1 kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <shuttl shuttle=""> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7f490000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <acpi cpu=""> on acpi0 cpu1: <acpi cpu=""> on acpi0 acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 acpi_button0: <power button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 pcib1: <pci-pci bridge=""> irq 16 at device 1.0 on pci0 pci1: <pci bus=""> on pcib1 em0: <intel(r) 1000="" pro="" network="" connection="" 7.0.5=""> port 0xbf00-0xbf1f mem 0xfd8e0000-0xfd8fffff,0xfd8c0000-0xfd8dffff irq 16 at device 0.0 on pci1 em0: Using MSI interrupt em0: [FILTER] em1: <intel(r) 1000="" pro="" network="" connection="" 7.0.5=""> port 0xbe00-0xbe1f mem 0xfd8a0000-0xfd8bffff,0xfd880000-0xfd89ffff irq 17 at device 0.1 on pci1 em1: Using MSI interrupt em1: [FILTER] vgapci0: <vga-compatible display=""> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfde00000-0xfdefffff irq 16 at device 2.0 on pci0 agp0: <intel g33="" svga="" controller=""> on vgapci0 agp0: detected 7164k stolen memory agp0: aperture size is 256M pci0: <multimedia, hda=""> at device 27.0 (no driver attached) pcib2: <acpi pci-pci="" bridge=""> at device 28.0 on pci0 pci2: <acpi pci="" bus=""> on pcib2 pcib3: <acpi pci-pci="" bridge=""> at device 28.1 on pci0 pci3: <acpi pci="" bus=""> on pcib3 mskc0: <marvell yukon="" 88e8056="" gigabit="" ethernet=""> port 0xce00-0xceff mem 0xfdafc000-0xfdafffff irq 17 at device 0.0 on pci3 msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" ultra="" id="" 0xb4="" rev="" 0x05=""> on mskc0 miibus0: <mii bus=""> on msk0 e1000phy0: <marvell 88e1149="" gigabit="" phy=""> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto mskc0: [ITHREAD] uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a=""> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0 uhci0: [ITHREAD] usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a=""> on uhci0 uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b=""> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b=""> on uhci1 uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c=""> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c=""> on uhci2 uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d=""> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0 uhci3: [ITHREAD] usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d=""> on uhci3 ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller=""> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller=""> on ehci0 pcib4: <acpi pci-pci="" bridge=""> at device 30.0 on pci0 pci4: <acpi pci="" bus=""> on pcib4 fwohci0: <texas instruments="" tsb43ab22="" a=""> mem 0xfd7ff000-0xfd7ff7ff,0xfd7f8000-0xfd7fbfff irq 18 at device 10.0 on pci4 fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:30:1b:00:00:46:8b:46 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <ieee1394(firewire) bus=""> on fwohci0 dcons_crom0: <dcons configuration="" rom=""> on firewire0 dcons_crom0: bus_addr 0x7d118000 fwe0: <ethernet over="" firewire=""> on firewire0 if_fwe0: Fake Ethernet address: 02:30:1b:46:8b:46 fwip0: <ip over="" firewire=""> on firewire0 fwip0: Firewire address: 00:30:1b:00:00:46:8b:46 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode isab0: <pci-isa bridge=""> at device 31.0 on pci0 isa0: <isa bus=""> on isab0 atapci0: <intel ich7="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.1 on pci0 ata0: <ata 0="" channel=""> on atapci0 ata0: [ITHREAD] atapci1: <intel ich7="" sata300="" controller=""> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ata 0="" channel=""> on atapci1 ata2: [ITHREAD] ata3: <ata 1="" channel=""> on atapci1 ata3: [ITHREAD] pci0: <serial bus,="" smbus=""> at device 31.3 (no driver attached) acpi_tz0: <thermal zone=""> on acpi0 atrtc0: <at realtime="" clock=""> port 0x70-0x73 on acpi0 fdc0: <floppy drive="" controller=""> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] ppc0: <parallel port=""> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppc0: [ITHREAD] ppbus0: <parallel port="" bus=""> on ppc0 plip0: <plip network="" interface=""> on ppbus0 plip0: [ITHREAD] lpt0: <printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <parallel i="" o=""> on ppbus0 pmtimer0 on isa0 orm0: <isa option="" roms=""> at iomem 0xcc000-0xccfff,0xef000-0xeffff pnpid ORM0000 on isa0 sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 on isa0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] est0: <enhanced speedstep="" frequency="" control=""> on cpu0 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 est1: <enhanced speedstep="" frequency="" control=""> on cpu1 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 acpi_tz0: _TMP value is absurd, ignored (-73.0C) acpi_tz0: _TMP value is absurd, ignored (-73.0C) acpi_tz0: _TMP value is absurd, ignored (-73.0C) ugen0.1: <intel> at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0 ugen1.1: <intel> at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus1 ugen2.1: <intel> at usbus2 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus2 ugen3.1: <intel> at usbus3 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus3 ugen4.1: <intel> at usbus4 uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered acpi_tz0: _TMP value is absurd, ignored (-73.0C) acpi_tz0: _TMP value is absurd, ignored (-73.0C) acd0: DVDROM <compaq dvd-rom="" gdr8160b="" 0012=""> at ata0-master UDMA40 ad4: 152626MB <wdc wd1600aajs-00b4a0="" 01.03a01=""> at ata2-master UDMA100 SATA SMP: AP CPU #1 Launched! Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad4s1a acpi_tz0: _TMP value is absurd, ignored (-73.0C) pflog0: promiscuous mode enabled load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded em1: link state changed to UP lagg0: link state changed to UP msk0: link state changed to UP acpi_tz0: _TMP value is absurd, ignored (-73.0C) ovpnc2: link state changed to UP ovpnc1: link state changed to UP ovpnc5: link state changed to UP ovpnc6: link state changed to UP ovpnc7: link state changed to UP ovpnc3: link state changed to UP ovpnc4: link state changed to UP</wdc></compaq></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></parallel></printer></plip></parallel></parallel></floppy></at></thermal></serial></ata></ata></intel></ata></intel></isa></pci-isa></ip></ethernet></dcons></ieee1394(firewire)></texas></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></intel(r)></intel(r)></pci></pci-pci></acpi></acpi></power></high></acpi></acpi></shuttl></software></version></shuttl></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe> -
Hi, I also have problem with processor graph, it's empty. My 2.0-BETA4 (i386)
built on Thu Aug 26 00:12:24 EDT 2010 running on ESXi serverhw.machine: i386
hw.model: Intel(R) Xeon(TM) CPU 3.00GHz
hw.ncpu: 1
hw.machine_arch: i386 -
Well, the Processor Graph doesn't work with 2.0-BETA4 (i386) built on Thu Aug 26 09:00:28 EDT 2010 snapshot.
All other graphs are working but there's still Error for Themes (using defaults).What platform are you on? I seem to be hunting subtle differences between various versions of top where the output is shifted 1 field and then doesn't produce any data.
If other people are also seeing empty processor graphs I need to know if it is a VM and what sort of hardware you are on. E.g. uni processor, smp, embedded.
Here we go:
Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #1: Thu Aug 26 08:48:53 EDT 2010 sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense.8 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) (1102.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Family = 6 Model = 8 Stepping = 1 Features=0x383fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse>AMD Features=0xc0400800 <syscall,mmx+,3dnow!+,3dnow!>real memory = 1073741824 (1024 MB) avail memory = 1031897088 (984 MB) mptable_probe: MP Config Table has bad signature: \^O8\^O ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc074f1b0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc074f270, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc074f330, 0) error 1 wlan: mac acl policy registered wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xc092f7c0, 0) error 1 kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <nvidia awrdacpi="">on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3fef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <acpi cpu="">on acpi0 acpi_button0: <power button="">on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 Correcting nForce2 C1 CPU disconnect hangs agp0: <nvidia nforce2="" agp="" controller="">on hostb0 pci0: <memory, ram="">at device 0.1 (no driver attached) pci0: <memory, ram="">at device 0.2 (no driver attached) pci0: <memory, ram="">at device 0.3 (no driver attached) pci0: <memory, ram="">at device 0.4 (no driver attached) pci0: <memory, ram="">at device 0.5 (no driver attached) isab0: <pci-isa bridge="">at device 1.0 on pci0 isa0: <isa bus="">on isab0 pci0: <serial bus,="" smbus="">at device 1.1 (no driver attached) ohci0: <ohci (generic)="" usb="" controller="">mem 0xe0001000-0xe0001fff irq 5 at device 2.0 on pci0 ohci0: [ITHREAD] usbus0: <ohci (generic)="" usb="" controller="">on ohci0 ohci1: <ohci (generic)="" usb="" controller="">mem 0xe0002000-0xe0002fff irq 12 at device 2.1 on pci0 ohci1: [ITHREAD] usbus1: <ohci (generic)="" usb="" controller="">on ohci1 ehci0: <nvidia nforce2="" usb="" 2.0="" controller="">mem 0xe0003000-0xe00030ff irq 11 at device 2.2 on pci0 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <nvidia nforce2="" usb="" 2.0="" controller="">on ehci0 nfe0: <nvidia nforce2="" mcp2="" networking="" adapter="">port 0xe000-0xe007 mem 0xe0000000-0xe0000fff irq 11 at device 4.0 on pci0 miibus0: <mii bus="">on nfe0 rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nfe0: [FILTER] pcib1: <acpi pci-pci="" bridge="">at device 8.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 skc0: <d-link dge-530t="" gigabit="" ethernet="">port 0xd000-0xd0ff mem 0xdf000000-0xdf003fff irq 12 at device 8.0 on pci1 skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9) sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0 miibus1: <mii bus="">on sk0 e1000phy0: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto skc0: [ITHREAD] atapci0: <nvidia nforce2="" udma133="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0 ata0: <ata 0="" channel="">on atapci0 ata0: [ITHREAD] ata1: <ata 1="" channel="">on atapci0 ata1: [ITHREAD] pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0 pci2: <acpi pci="" bus="">on pcib2 vgapci0: <vga-compatible display="">mem 0xdc000000-0xdcffffff,0xd0000000-0xd7ffffff irq 5 at device 0.0 on pci2 atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppc0: [ITHREAD] ppbus0: <parallel port="" bus="">on ppc0 plip0: <plip network="" interface="">on ppbus0 plip0: [ITHREAD] lpt0: <printer>on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <parallel i="" o="">on ppbus0 pmtimer0 on isa0 orm0: <isa option="" roms="">at iomem 0xc0000-0xcf7ff,0xd0000-0xd17ff pnpid ORM0000 on isa0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] Timecounter "TSC" frequency 1102508999 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ad0: 39075MB <maxtor 6e040l0="" nar61590="">at ata0-master UDMA133 ugen0.1: <nvidia>at usbus0 uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0 ugen1.1: <nvidia>at usbus1 uhub1: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1 ugen2.1: <nvidia>at usbus2 uhub2: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2 GEOM: ad0: partition 1 does not start on a track boundary. GEOM: ad0: partition 1 does not end on a track boundary. acd0: DVDR <hl-dt-st dvdram="" gsa-h10n="" jj11="">at ata1-slave UDMA66 GEOM: ad0s1: geometry does not match label (16h,63s != 16h,255s). Root mount waiting for: usbus2 usbus1 usbus0 uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered Root mount waiting for: usbus2 Root mount waiting for: usbus2 uhub2: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad0s1a pflog0: promiscuous mode enabled sk0: link state changed to UP nfe0: promiscuous mode enabled nfe0: promiscuous mode disabled nfe0: promiscuous mode enabled</hl-dt-st></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></maxtor></at></keyboard></generic></system></isa></parallel></printer></plip></parallel></parallel></at></vga-compatible></acpi></acpi></ata></ata></nvidia></marvell></mii></marvell></d-link></acpi></acpi></rtl8201l></mii></nvidia></nvidia></nvidia></ohci></ohci></ohci></ohci></serial></isa></pci-isa></memory,></memory,></memory,></memory,></memory,></nvidia></acpi></acpi></power></acpi></nvidia></software></syscall,mmx+,3dnow!+,3dnow!></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse> -
2.0-BETA4 (i386) built on Fri Aug 27 23:40:39 EDT 2010 Snapshot fixed all graphs!!!
Thanks devs!
