RRD Graphs

[Jonb]

Do you know when this is scheduled to be fixed.

[databeestje]

This appeared to be specific to people that used openvpn tunnels. This caused the updated process to hang.

This is now fixed.

[johnnybe]

Well, the Processor Graph doesn't work with 2.0-BETA4  (i386) built on Thu Aug 26 09:00:28 EDT 2010 snapshot.
All other graphs are working but there's still Error for Themes (using defaults).

[jimp]

The error about colors being missing from themes should be fixed, I committed something earlier today for it.

[Jonb]

Wahay nice to see it back.

[databeestje]

@johnnybe:

Well, the Processor Graph doesn't work with 2.0-BETA4  (i386) built on Thu Aug 26 09:00:28 EDT 2010 snapshot.
All other graphs are working but there's still Error for Themes (using defaults).

What platform are you on? I seem to be hunting subtle differences between various versions of top where the output is shifted 1 field and then doesn't produce any data.

If other people are also seeing empty processor graphs I need to know if it is a VM and what sort of hardware you are on. E.g. uni processor, smp, embedded.

[MrHorizontal]

@databeestje:

What platform are you on? I seem to be hunting subtle differences between various versions of top where the output is shifted 1 field and then doesn't produce any data.

If other people are also seeing empty processor graphs I need to know if it is a VM and what sort of hardware you are on. E.g. uni processor, smp, embedded.

Practically no RRD graphs are showing on my box. RRD graphs sometimes work with some snaps and not with others - but my current snap:

uname -a
FreeBSD X.X.X.X 8.1-RELEASE FreeBSD 8.1-RELEASE #1: Mon Aug 23 04:03:47 EDT 2010     sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8  i386

doesn't work for RRD.

Here's dmesg, since you need hardware details:

dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #1: Mon Aug 23 04:03:47 EDT 2010
    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (2675.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping = 11
  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm>AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2075967488 (1979 MB)
ACPI APIC Table: <shuttl shuttle="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <version 2.0=""> irqs 0-23 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc072c120, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc072c1e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc072c2a0, 0) error 1
wlan: mac acl policy registered
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc08ff2b0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <shuttl shuttle=""> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f490000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <acpi cpu=""> on acpi0
cpu1: <acpi cpu=""> on acpi0
acpi_hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
acpi_button0: <power button=""> on acpi0
pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus=""> on pcib0
pcib1: <pci-pci bridge=""> irq 16 at device 1.0 on pci0
pci1: <pci bus=""> on pcib1
em0: <intel(r) 1000="" pro="" network="" connection="" 7.0.5=""> port 0xbf00-0xbf1f mem 0xfd8e0000-0xfd8fffff,0xfd8c0000-0xfd8dffff irq 16 at device 0.0 on pci1
em0: Using MSI interrupt
em0: [FILTER]
em1: <intel(r) 1000="" pro="" network="" connection="" 7.0.5=""> port 0xbe00-0xbe1f mem 0xfd8a0000-0xfd8bffff,0xfd880000-0xfd89ffff irq 17 at device 0.1 on pci1
em1: Using MSI interrupt
em1: [FILTER]
vgapci0: <vga-compatible display=""> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfde00000-0xfdefffff irq 16 at device 2.0 on pci0
agp0: <intel g33="" svga="" controller=""> on vgapci0
agp0: detected 7164k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, hda=""> at device 27.0 (no driver attached)
pcib2: <acpi pci-pci="" bridge=""> at device 28.0 on pci0
pci2: <acpi pci="" bus=""> on pcib2
pcib3: <acpi pci-pci="" bridge=""> at device 28.1 on pci0
pci3: <acpi pci="" bus=""> on pcib3
mskc0: <marvell yukon="" 88e8056="" gigabit="" ethernet=""> port 0xce00-0xceff mem 0xfdafc000-0xfdafffff irq 17 at device 0.0 on pci3
msk0: <marvell technology="" group="" ltd.="" yukon="" ec="" ultra="" id="" 0xb4="" rev="" 0x05=""> on mskc0
miibus0: <mii bus=""> on msk0
e1000phy0: <marvell 88e1149="" gigabit="" phy=""> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mskc0: [ITHREAD]
uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a=""> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a=""> on uhci0
uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b=""> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b=""> on uhci1
uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c=""> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c=""> on uhci2
uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d=""> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d=""> on uhci3
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller=""> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller=""> on ehci0
pcib4: <acpi pci-pci="" bridge=""> at device 30.0 on pci0
pci4: <acpi pci="" bus=""> on pcib4
fwohci0: <texas instruments="" tsb43ab22="" a=""> mem 0xfd7ff000-0xfd7ff7ff,0xfd7f8000-0xfd7fbfff irq 18 at device 10.0 on pci4
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:30:1b:00:00:46:8b:46
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <ieee1394(firewire) bus=""> on fwohci0
dcons_crom0: <dcons configuration="" rom=""> on firewire0
dcons_crom0: bus_addr 0x7d118000
fwe0: <ethernet over="" firewire=""> on firewire0
if_fwe0: Fake Ethernet address: 02:30:1b:46:8b:46
fwip0: <ip over="" firewire=""> on firewire0
fwip0: Firewire address: 00:30:1b:00:00:46:8b:46 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <pci-isa bridge=""> at device 31.0 on pci0
isa0: <isa bus=""> on isab0
atapci0: <intel ich7="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.1 on pci0
ata0: <ata 0="" channel=""> on atapci0
ata0: [ITHREAD]
atapci1: <intel ich7="" sata300="" controller=""> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ata 0="" channel=""> on atapci1
ata2: [ITHREAD]
ata3: <ata 1="" channel=""> on atapci1
ata3: [ITHREAD]
pci0: <serial bus,="" smbus=""> at device 31.3 (no driver attached)
acpi_tz0: <thermal zone=""> on acpi0
atrtc0: <at realtime="" clock=""> port 0x70-0x73 on acpi0
fdc0: <floppy drive="" controller=""> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
ppc0: <parallel port=""> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus=""> on ppc0
plip0: <plip network="" interface=""> on ppbus0
plip0: [ITHREAD]
lpt0: <printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <parallel i="" o=""> on ppbus0
pmtimer0 on isa0
orm0: <isa option="" roms=""> at iomem 0xcc000-0xccfff,0xef000-0xeffff pnpid ORM0000 on isa0
sc0: <system console=""> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 on isa0
atkbd0: <at keyboard=""> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
est0: <enhanced speedstep="" frequency="" control=""> on cpu0
p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0
est1: <enhanced speedstep="" frequency="" control=""> on cpu1
p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
acpi_tz0: _TMP value is absurd, ignored (-73.0C)
acpi_tz0: _TMP value is absurd, ignored (-73.0C)
acpi_tz0: _TMP value is absurd, ignored (-73.0C)
ugen0.1: <intel> at usbus0
uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0
ugen1.1: <intel> at usbus1
uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus1
ugen2.1: <intel> at usbus2
uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus2
ugen3.1: <intel> at usbus3
uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus3
ugen4.1: <intel> at usbus4
uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
acpi_tz0: _TMP value is absurd, ignored (-73.0C)
acpi_tz0: _TMP value is absurd, ignored (-73.0C)
acd0: DVDROM <compaq dvd-rom="" gdr8160b="" 0012=""> at ata0-master UDMA40 
ad4: 152626MB <wdc wd1600aajs-00b4a0="" 01.03a01=""> at ata2-master UDMA100 SATA
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
acpi_tz0: _TMP value is absurd, ignored (-73.0C)
pflog0: promiscuous mode enabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
em1: link state changed to UP
lagg0: link state changed to UP
msk0: link state changed to UP
acpi_tz0: _TMP value is absurd, ignored (-73.0C)
ovpnc2: link state changed to UP
ovpnc1: link state changed to UP
ovpnc5: link state changed to UP
ovpnc6: link state changed to UP
ovpnc7: link state changed to UP
ovpnc3: link state changed to UP
ovpnc4: link state changed to UP</wdc></compaq></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></parallel></printer></plip></parallel></parallel></floppy></at></thermal></serial></ata></ata></intel></ata></intel></isa></pci-isa></ip></ethernet></dcons></ieee1394(firewire)></texas></acpi></acpi></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></marvell></mii></marvell></marvell></acpi></acpi></acpi></acpi></multimedia,></intel></vga-compatible></intel(r)></intel(r)></pci></pci-pci></acpi></acpi></power></high></acpi></acpi></shuttl></software></version></shuttl></lahf></nx,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

[Wh1te]

Hi, I also have problem with processor graph, it's empty. My 2.0-BETA4  (i386)
built on Thu Aug 26 00:12:24 EDT 2010 running on ESXi server

hw.machine: i386
hw.model: Intel(R) Xeon(TM) CPU 3.00GHz
hw.ncpu: 1
hw.machine_arch: i386

[johnnybe]

@databeestje:

@johnnybe:

Well, the Processor Graph doesn't work with 2.0-BETA4  (i386) built on Thu Aug 26 09:00:28 EDT 2010 snapshot.
All other graphs are working but there's still Error for Themes (using defaults).

What platform are you on? I seem to be hunting subtle differences between various versions of top where the output is shifted 1 field and then doesn't produce any data.

If other people are also seeing empty processor graphs I need to know if it is a VM and what sort of hardware you are on. E.g. uni processor, smp, embedded.

Here we go:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #1: Thu Aug 26 08:48:53 EDT 2010
    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense.8 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm)  (1102.51-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Family = 6  Model = 8  Stepping = 1
  Features=0x383fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse>AMD Features=0xc0400800 <syscall,mmx+,3dnow!+,3dnow!>real memory  = 1073741824 (1024 MB)
avail memory = 1031897088 (984 MB)
mptable_probe: MP Config Table has bad signature: \^O8\^O
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc074f1b0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc074f270, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc074f330, 0) error 1
wlan: mac acl policy registered
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (wpi_fw, 0xc092f7c0, 0) error 1
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <nvidia awrdacpi="">on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <acpi cpu="">on acpi0
acpi_button0: <power button="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
Correcting nForce2 C1 CPU disconnect hangs
agp0: <nvidia nforce2="" agp="" controller="">on hostb0
pci0: <memory, ram="">at device 0.1 (no driver attached)
pci0: <memory, ram="">at device 0.2 (no driver attached)
pci0: <memory, ram="">at device 0.3 (no driver attached)
pci0: <memory, ram="">at device 0.4 (no driver attached)
pci0: <memory, ram="">at device 0.5 (no driver attached)
isab0: <pci-isa bridge="">at device 1.0 on pci0
isa0: <isa bus="">on isab0
pci0: <serial bus,="" smbus="">at device 1.1 (no driver attached)
ohci0: <ohci (generic)="" usb="" controller="">mem 0xe0001000-0xe0001fff irq 5 at device 2.0 on pci0
ohci0: [ITHREAD]
usbus0: <ohci (generic)="" usb="" controller="">on ohci0
ohci1: <ohci (generic)="" usb="" controller="">mem 0xe0002000-0xe0002fff irq 12 at device 2.1 on pci0
ohci1: [ITHREAD]
usbus1: <ohci (generic)="" usb="" controller="">on ohci1
ehci0: <nvidia nforce2="" usb="" 2.0="" controller="">mem 0xe0003000-0xe00030ff irq 11 at device 2.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <nvidia nforce2="" usb="" 2.0="" controller="">on ehci0
nfe0: <nvidia nforce2="" mcp2="" networking="" adapter="">port 0xe000-0xe007 mem 0xe0000000-0xe0000fff irq 11 at device 4.0 on pci0
miibus0: <mii bus="">on nfe0
rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nfe0: [FILTER]
pcib1: <acpi pci-pci="" bridge="">at device 8.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
skc0: <d-link dge-530t="" gigabit="" ethernet="">port 0xd000-0xd0ff mem 0xdf000000-0xdf003fff irq 12 at device 8.0 on pci1
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <marvell semiconductor,="" inc.="" yukon="">on skc0
miibus1: <mii bus="">on sk0
e1000phy0: <marvell 88e1011="" gigabit="" phy="">PHY 0 on miibus1
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
skc0: [ITHREAD]
atapci0: <nvidia nforce2="" udma133="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci2: <acpi pci="" bus="">on pcib2
vgapci0: <vga-compatible display="">mem 0xdc000000-0xdcffffff,0xd0000000-0xd7ffffff irq 5 at device 0.0 on pci2
atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus="">on ppc0
plip0: <plip network="" interface="">on ppbus0
plip0: [ITHREAD]
lpt0: <printer>on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
pmtimer0 on isa0
orm0: <isa option="" roms="">at iomem 0xc0000-0xcf7ff,0xd0000-0xd17ff pnpid ORM0000 on isa0
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
Timecounter "TSC" frequency 1102508999 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ad0: 39075MB <maxtor 6e040l0="" nar61590="">at ata0-master UDMA133
ugen0.1: <nvidia>at usbus0
uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
ugen1.1: <nvidia>at usbus1
uhub1: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus1
ugen2.1: <nvidia>at usbus2
uhub2: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2
GEOM: ad0: partition 1 does not start on a track boundary.
GEOM: ad0: partition 1 does not end on a track boundary.
acd0: DVDR <hl-dt-st dvdram="" gsa-h10n="" jj11="">at ata1-slave UDMA66
GEOM: ad0s1: geometry does not match label (16h,63s != 16h,255s).
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus2
Root mount waiting for: usbus2
uhub2: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
pflog0: promiscuous mode enabled
sk0: link state changed to UP
nfe0: promiscuous mode enabled
nfe0: promiscuous mode disabled
nfe0: promiscuous mode enabled</hl-dt-st></nvidia></nvidia></nvidia></nvidia></nvidia></nvidia></maxtor></at></keyboard></generic></system></isa></parallel></printer></plip></parallel></parallel></at></vga-compatible></acpi></acpi></ata></ata></nvidia></marvell></mii></marvell></d-link></acpi></acpi></rtl8201l></mii></nvidia></nvidia></nvidia></ohci></ohci></ohci></ohci></serial></isa></pci-isa></memory,></memory,></memory,></memory,></memory,></nvidia></acpi></acpi></power></acpi></nvidia></software></syscall,mmx+,3dnow!+,3dnow!></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse> 

[johnnybe]

2.0-BETA4  (i386) built on Fri Aug 27 23:40:39 EDT 2010 Snapshot fixed all graphs!!!
Thanks devs!