Need Help: Split Bandwidth; Public IP on LAN (Bridge)
-
Geeks,
I need your help. Newbie here but can follow instructions. Have 4MB connectivity from ISP and i need to split 2MB for a client and use 2MB for us. New to pfsense, running on LiveCD. I have 5 Public IPs. (62.x.x.192/21)
I went through the forum and some other support sites but could not figure it out.
Any step by step instruction would be highly appreciated.
Thanks in advance.
-
Traffic Shaping is what you're after. I'd start with the stickies at the top of this (Traffic Shaping) forum.
-
Thanks for the reply. Traffic shaping is for controling the bandwidth. Thats ok. But what about having a public IP on the LAN side? THe client is insisting the Public IP and they will use their own devices such as firewall and routers it seems.
I simply add a DMZ IP (192.168.1.10) and they do not need a class C address. I have 5 public IPs (Static) on the WAN side. How to set this up for them?
Please help…
-
You may want to see this post in another thread.
-
Thank you very much for taking me to the right path. This is what i am looking for but the explanation is bit hard for me to configure as my networking knowledge is limited - to be honest. My target is only spliting the BW to 2MB and giving the client a public IP. Anyone willing to gimme a step by step guide to do this? Please help.
-
You're probably best paying for the commercial support service that's available since it sounds like you're massively out of your depth.