Snmp problem: m0n0mon broken since a while now
-
Ooops … that was magic! I'm wondering if you answered, bevor i'd posted ;D
location := "" contact := "" read := "public" system := 1 # pfSense %snmpd begemotSnmpdDebugDumpPdus = 2 begemotSnmpdDebugSyslogPri = 7 begemotSnmpdCommunityString.0.1 = $(read) begemotSnmpdCommunityDisable = 1 begemotSnmpdPortStatus.0.0.0.0.161 = 1 begemotSnmpdLocalPortStatus."/var/run/snmpd.sock" = 1 begemotSnmpdLocalPortType."/var/run/snmpd.sock" = 4 # These are bsnmp macros not php vars. sysContact = $(contact) sysLocation = $(location) sysObjectId = 1.3.6.1.4.1.12325.1.1.2.1.$(system) snmpEnableAuthenTraps = 2 -
Interesting, it's completely missing the section that should be in there if you really have those checkboxes set in the GUI.
It should end with:
begemotSnmpdModulePath."mibII" = "/usr/lib/snmp_mibII.so" begemotSnmpdModulePath."netgraph" = "/usr/lib/snmp_netgraph.so" %netgraph begemotNgControlNodeName = "snmpd" begemotSnmpdModulePath."pf" = "/usr/lib/snmp_pf.so" begemotSnmpdModulePath."hostres" = "/usr/lib/snmp_hostres.so" -
I put your additional lines via pfSense load/edit/save in snmpd.conf and reboot pfsense (since i don't know how to restart a service manually) … and it's working now!
-
I forgot to say: I expicit unchecked saved and checked the checkboxes in the SNMP dialog before. Nothing happened. There seems to be something going wrong.
-
And when I check the boxes on mine, the config comes out as expected. Even if I check them one by one, the expected lines appear.
-
hmmm … but you have no embedded?!
-
I just tested that on my ALIX. It works fine there.
-
Then i have no clue what could be the reason. I have a old wrap at the company. If i got time next week i modify it to nopacket, perform a clean install on the wrap and report the result here.
-
When you check those boxes in the GUI and save, and then leave and come back to the page, are they still checked? Or did they uncheck themselves?
It could be something in your config that's doing it, but I'm not sure what that might be
-
I don't know … call me crazy now. I tried different things and every time after changing things i checked /var/etc/snmpd.conf. It's working now? Yesterday i made the screenshots and post the content of the config file. The essential lines were missing. This is what i did now:
First i just check and uncheck the boxes. Accordingly to the changes in the GUI the snmpd.conf was changed also. Then i tried to disabled completely SNMP services and save the settings. After that i enabled it again with checking the boxes. Works! Then the same but enabling without checking the boxes. Works too. Then checking the boxes ... works also.
It's not really nice not to know whats going wrong. But i can clearly say that i had this problem, not only on my machine. Since it's not a totally really needed essential feature (like IPSec), i accepted this behavior for a long time.
At the moment i hope, that it was a problem, that may be existed in older versions, and may be i upgraded it all the time, to the newer snapshots ... and the issue may only occur in touch with my existing config ... and it's now is away cause of the newer snapshot (wondering why i was yesterday not able to save the settings with same snapshot)?!
But thx very much for your help ... wishing you a relaxed weekend 8)
