IP-Blocklist

tommyboy180

Troubleshooting guide:

Some people have been having issues getting the package to run. Before you think you need to rebuild pfsense try a simple test first.
Go to Firewall -> Rules and pick a random entry. Click the edit button. Don't make any changes! Now click save.
Go back to your package. Ensure Enable is checked and Click save. Your package should be running now.

ThinkSmart

Hey,

i can install the package but i can't load the blacklists into it. So if i use the examples (level1, level2, level3) or other blacklists from here they are at the list, but it says there were no blocked ips or networks.

I've tried it with pfsense 1.2.3. and 2.0BETA5. The tipp above me doesn't make changes. Thanks.

tommyboy180

@ThinkSmart:

Hey,

i can install the package but i can't load the blacklists into it. So if i use the examples (level1, level2, level3) or other blacklists from here they are at the list, but it says there were no blocked ips or networks.

I've tried it with pfsense 1.2.3. and 2.0BETA5. The tipp above me doesn't make changes. Thanks.

Take a look at the first post in this topic for the FAQ. If you still have problems let me know.

ThinkSmart

Take a look at the Pictures, after adding the Link in the Textbox and pressing + and save/update, there where no changes. :/

packages.jpg_thumb

ip-blocklist.jpg_thumb

Wolfsokin

Try loading the url of that blocklist in a browser and see what you get. I get a 404 file not found.

:edit to add

try using the url to this blocklist and see if it works. This list works for me so I know the url is good.

http://list.iblocklist.com/files/tzmtqbbsgbtfxainogvm.gz

kalons

Hi, tommyboy180

I don't think it is working, now my pfsense working on transparent bridging mode.
I installed the IP-blocklist without any error.
I add URL list such as "http://www.google.com" for test. And click "block outbound?" as well.
But I still can logon the website.
And I check the Rules under firewall. There is no any change for my original setting there.
Would you please to check that?
Thx!

kalons

@tommyboy180:

Troubleshooting guide:

Some people have been having issues getting the package to run. Before you think you need to rebuild pfsense try a simple test first.
Go to Firewall -> Rules and pick a random entry. Click the edit button. Don't make any changes! Now click save.
Go back to your package. Ensure Enable is checked and Click save. Your package should be running now.

Hi Tommy,

I try this way many times but still not working.

tommyboy180

@kalons:

Hi, tommyboy180

I don't think it is working, now my pfsense working on transparent bridging mode.
I installed the IP-blocklist without any error.
I add URL list such as "http://www.google.com" for test. And click "block outbound?" as well.
But I still can logon the website.
And I check the Rules under firewall. There is no any change for my original setting there.
Would you please to check that?
Thx!

Please re-read the FAQ items on post #1. You don't add domain names as the url you add lists in the url list.

rajkedda

Hi countryipblocks,
I am trying to access your site to download the country ip blocks. I keep getting forbidden, but i access your site from different location, it works fine. By any chance my WAN IP is blocked on your network?

Link I am trying is http://www.countryipblocks.net/networking/pg2-formatted-acess-control-lists/

Guest

Our servers have some auto-defense characteristics to prevent multiple high volume data downloads during a single day. Let me know the IP address you are using (send me a private message) and I will investigate.

Spock75

Is it possible to add description after the link in "Current List(s):" ?

I use iblocklist.com and many of the links look like this "ghlzqtqxnzctvvajwwag.gz"

tommyboy180

@Spock75:

Is it possible to add description after the link in "Current List(s):" ?

I use iblocklist.com and many of the links look like this "ghlzqtqxnzctvvajwwag.gz"

Thanks for the idea! It's now in my to-do list.

p-root

@rajkedda:

Hi countryipblocks,
I am trying to access your site to download the country ip blocks. I keep getting forbidden, but i access your site from different location, it works fine. By any chance my WAN IP is blocked on your network?

Link I am trying is http://www.countryipblocks.net/networking/pg2-formatted-acess-control-lists/

Same thing, i can't access to countryblocks.net

Countryblock status :

Current Status = running

You are blocking 0 Networks

tommyboy180

Countryipblocks contacted me about this a couple days ago. I am working on a solution right now.

p-root

@tommyboy180:

Countryipblocks contacted me about this a couple days ago. I am working on a solution right now.

Thank you tommyboy180 and countryipblocks :)

tommyboy180

@p-root:

@tommyboy180:

Countryipblocks contacted me about this a couple days ago. I am working on a solution right now.

Thank you tommyboy180 and countryipblocks :)

For the countryipblocks PG2 format list you have to link directly to the .txt file. For example, for AFGHANISTAN add the direct link like: https://www.countryipblocks.net/e_country_data/AF_pg2.txt

Try that and see if your lists will now work.

darxmurf

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.
The installation is ok (tooks few seconds on : Executing custom_php_install_command()…) and then I'v got this message in the config page

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

When I try to add a list, it displays this

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 72 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

I tried to uninstall/reinstall but same error.
I tried with and without the *Enable IP-Blocklist" box checked
I tried with and without country-block

Cheers

Darx

tommyboy180

@darxmurf:

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.
The installation is ok (tooks few seconds on : Executing custom_php_install_command()…) and then I'v got this message in the config page

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

When I try to add a list, it displays this

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 72 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

I tried to uninstall/reinstall but same error.
I tried with and without the *Enable IP-Blocklist" box checked
I tried with and without country-block

Cheers

Darx

It's because you're running embedded. I don't have the time right now to work on embedded (sorry). If you know PHP I can take your fixes and update my package.

g4m3c4ck

All he would have to do is use /tmp instead right? Since the list is pretty much volatile anyways. Not sure where the static parts would go in an embedded system though. Maybe I can throw together an embedded vm and work on it.

g4m3c4ck

@darxmurf:

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.

Which embedded image are you using?