IP-Blocklist

Guest

Our servers have some auto-defense characteristics to prevent multiple high volume data downloads during a single day. Let me know the IP address you are using (send me a private message) and I will investigate.

Spock75

Is it possible to add description after the link in "Current List(s):" ?

I use iblocklist.com and many of the links look like this "ghlzqtqxnzctvvajwwag.gz"

tommyboy180

@Spock75:

Is it possible to add description after the link in "Current List(s):" ?

I use iblocklist.com and many of the links look like this "ghlzqtqxnzctvvajwwag.gz"

Thanks for the idea! It's now in my to-do list.

p-root

@rajkedda:

Hi countryipblocks,
I am trying to access your site to download the country ip blocks. I keep getting forbidden, but i access your site from different location, it works fine. By any chance my WAN IP is blocked on your network?

Link I am trying is http://www.countryipblocks.net/networking/pg2-formatted-acess-control-lists/

Same thing, i can't access to countryblocks.net

Countryblock status :

Current Status = running

You are blocking 0 Networks

tommyboy180

Countryipblocks contacted me about this a couple days ago. I am working on a solution right now.

p-root

@tommyboy180:

Countryipblocks contacted me about this a couple days ago. I am working on a solution right now.

Thank you tommyboy180 and countryipblocks :)

tommyboy180

@p-root:

@tommyboy180:

Countryipblocks contacted me about this a couple days ago. I am working on a solution right now.

Thank you tommyboy180 and countryipblocks :)

For the countryipblocks PG2 format list you have to link directly to the .txt file. For example, for AFGHANISTAN add the direct link like: https://www.countryipblocks.net/e_country_data/AF_pg2.txt

Try that and see if your lists will now work.

darxmurf

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.
The installation is ok (tooks few seconds on : Executing custom_php_install_command()…) and then I'v got this message in the config page

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

When I try to add a list, it displays this

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 72 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

I tried to uninstall/reinstall but same error.
I tried with and without the *Enable IP-Blocklist" box checked
I tried with and without country-block

Cheers

Darx

tommyboy180

@darxmurf:

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.
The installation is ok (tooks few seconds on : Executing custom_php_install_command()…) and then I'v got this message in the config page

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

When I try to add a list, it displays this

Warning: fopen(lists.txt): failed to open stream: Read-only file system in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 69 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 70 Warning: fwrite(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 72 Warning: fclose(): supplied argument is not a valid stream resource in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 75 Warning: filesize(): Stat failed for lists.txt (errno=2 - No such file or directory) in /usr/local/www/packages/ipblocklist/ipblocklist_list.php on line 79

I tried to uninstall/reinstall but same error.
I tried with and without the *Enable IP-Blocklist" box checked
I tried with and without country-block

Cheers

Darx

It's because you're running embedded. I don't have the time right now to work on embedded (sorry). If you know PHP I can take your fixes and update my package.

g4m3c4ck

All he would have to do is use /tmp instead right? Since the list is pretty much volatile anyways. Not sure where the static parts would go in an embedded system though. Maybe I can throw together an embedded vm and work on it.

g4m3c4ck

@darxmurf:

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.

Which embedded image are you using?

darxmurf

@tommyboy180:

It's because you're running embedded. I don't have the time right now to work on embedded (sorry). If you know PHP I can take your fixes and update my package.

Okay no problem. I can have a look to modify it.
I was thinking about to run the mount_rw script somewhere and then load the list.
I'll let you know if I found the solution without crashing my system :)

darxmurf

@g4m3c4ck:

@darxmurf:

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.

Which embedded image are you using?

The 1GB Embeded on a CF Card
1.2.3-RELEASE
built on Mon Dec 7 18:11:25 EST 2009

tommyboy180

@darxmurf:

@g4m3c4ck:

@darxmurf:

Hi there,

Quick question, I tried to install IP-Blocklist on my 1.2.3 Embedded system.

Which embedded image are you using?

The 1GB Embeded on a CF Card
1.2.3-RELEASE
built on Mon Dec 7 18:11:25 EST 2009

Let me get a custom script for you to test. PM me your email.

darxmurf

Well, if I add a : conf_mount_rw(); in the script before the list creation, it should works isn't it ?

JSmorada

I tried ip-blocklist and could never get it to work. It shows that it's running but is always showing that is is blocking 0 Networks/IPs. Currrntly I'm using the CN and IN pg2.txt lists. I tried uninstalling/rebooting and reinstalling and the behavior didn't change. There isn't anything in the system log either:
Feb 2 08:28:16 check_reload_status: syncing firewall
Feb 2 08:27:05 check_reload_status: syncing firewall
Feb 2 08:26:36 syslogd: kernel boot file is /boot/kernel/kernel
Feb 2 08:26:36 syslogd: exiting on signal 15
Feb 2 08:26:25 syslogd: kernel boot file is /boot/kernel/kernel

darxmurf

okay,

I edited the file ipblocklist_list.php

added : require_once('config.inc');
added : conf_mount_rw(); and conf_mount_ro(); around the block line 69.

I can now start and add lists in the ip-blocklist settings but it still displays

Current Status = Running
You are blocking 0 Networks/IPs

Any idea ?

EDIT : When I try to delete a list, it reloads the config page in the iframe in the page ???

tommyboy180

@darxmurf:

okay,

I edited the file ipblocklist_list.php

added : require_once('config.inc');

added : conf_mount_rw(); and conf_mount_ro(); around the block line 69.

I can now start and add lists in the ip-blocklist settings but it still displays

Current Status = Running
You are blocking 0 Networks/IPs

Any idea ?

EDIT : When I try to delete a list, it reloads the config page in the iframe in the page ???

Are you using Firefox or Chrome?

g4m3c4ck

I got Blocking 0 Networks/IP because it was not actually retrieving the lists and putting into the tables at all. Check pfctl -sa | more and see if the table even exists. If not I would check if it is referencing the path properly.

JSmorada

@nipstech:

I tried ip-blocklist and could never get it to work. It shows that it's running but is always showing that is is blocking 0 Networks/IPs. Currrntly I'm using the CN and IN pg2.txt lists. I tried uninstalling/rebooting and reinstalling and the behavior didn't change. There isn't anything in the system log either:
Feb 2 08:28:16 check_reload_status: syncing firewall
Feb 2 08:27:05 check_reload_status: syncing firewall
Feb 2 08:26:36 syslogd: kernel boot file is /boot/kernel/kernel
Feb 2 08:26:36 syslogd: exiting on signal 15
Feb 2 08:26:25 syslogd: kernel boot file is /boot/kernel/kernel

I updated to the latest 2.0 snapshot and was able to get this from the system log:

Feb 2 19:27:58 check_reload_status: syncing firewall
Feb 2 19:27:58 php: /packages/ipblocklist/ipblocklist.php: The command 'rm errorOUT.txt' returned exit code '1', the output was 'rm: errorOUT.txt: No such file or directory'
Feb 2 19:27:58 php: /packages/ipblocklist/ipblocklist.php: The command 'rm -R /usr/local/www/packages/ipblocklist/lists' returned exit code '1', the output was 'rm: /usr/local/www/packages/ipblocklist/lists: No such file or directory'
Feb 2 19:27:58 php: /packages/ipblocklist/ipblocklist.php: The command 'ipfw -f flush' returned exit code '69', the output was 'ipfw: setsockopt(IP_FW_FLUSH): Protocol not available'