Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Pfsesen iGB driver support - aka my box keeps crashing/network hangs

    Scheduled Pinned Locked Moved 2.0-RC Snapshot Feedback and Problems - RETIRED
    18 Posts 4 Posters 7.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • E
      eri--
      last edited by

      Just this.
      hw.igb.num_queues=4

      1 Reply Last reply Reply Quote 0
      • R
        richc
        last edited by

        Thanks ermal, I will give it ago now then

        1 Reply Last reply Reply Quote 0
        • B
          Brutal
          last edited by

          richc - have you had any success?

          I have the same issue.  The LiveCD sees the interfaces on the Quad Nic with the "receive structures" error.  After installing to the Hard disk, it doesn't see the the interfaces at all.  After install, I add the "loader.conf.local" file with "hw.igb.num_queues=4" and nothing changes.

          Question for me is why does the LiveCD handle it different?

          1 Reply Last reply Reply Quote 0
          • W
            wallabybob
            last edited by

            What snapshot build? (It MIGHT make a difference.)

            The difference in behaviour MIGHT be that the Live CD kernel is a uniprocessor kernel while you have installed a SMP kernel. (There was some resource allocation problem previously reported for igb devices that got worse with increasing numbers of devices and increasing numbers of CPUs.) I this explains what you are seeing then  would expect the first boot after install to fail to attach some or all of the igbs (because the updated loader.conf.local wasn't read at boot time because you booted before updating the file) but they should all (or mostly) be seen on subsequent boots (because the updated loader.conf.local file was read at boot time).

            If things don't come good on a reboot after updating the loader.conf.local file (it is /boot/loader.conf.local isn't it?) then please post the output of the pfSense shell command dmesg here so I can get some more clues as to what is going on.

            1 Reply Last reply Reply Quote 0
            • B
              Brutal
              last edited by

              Thank you Wall….

              I wonder if Richc ever got his going.

              On mine, I disabled Hyperthreading
              boot the LiveCD  I was on the Feb 5th load.  Today I'm on the RC1 load (just downloaded). Same issue
              LiveCD detects the quad card (I340-T4) and gives the "Receive Structures" error.  But it sees the ports.
              I added the hw.igb.num_queues=2 to new loader.conf.local file
              installed to hard disk with Uniprocessor load
              after boot to hard disk, the igb driver doesn't get attached.

              This makes me think there is more differences to the livecd vs hd install.

              cpu0: <acpi cpu="">on acpi0
              cpu1: <acpi cpu="">on acpi0
              cpu2: <acpi cpu="">on acpi0
              cpu3: <acpi cpu="">on acpi0
              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
              pci0: <acpi pci="" bus="">on pcib0
              pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
              pci26: <acpi pci="" bus="">on pcib1
              pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
              pci31: <acpi pci="" bus="">on pcib2
              pci0: <base peripheral=""> at device 8.0 (no driver attached)
              pci0: <base peripheral=""> at device 8.1 (no driver attached)
              pci0: <base peripheral=""> at device 8.2 (no driver attached)
              pci0: <base peripheral=""> at device 8.3 (no driver attached)
              pci0: <base peripheral=""> at device 16.0 (no driver attached)
              pci0: <base peripheral=""> at device 16.1 (no driver attached)

              Why would the driver not be loaded with both LiveCD and HD install.
              I'm not very familiar with Freebsd.  How would I check for the driver.  If there, do I just modprobe it?</acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi>

              1 Reply Last reply Reply Quote 0
              • B
                Brutal
                last edited by

                Here's the dmesg snippet from the LiveCD:

                cpu0: <acpi cpu="">on acpi0
                cpu1: <acpi cpu="">on acpi0
                cpu2: <acpi cpu="">on acpi0
                cpu3: <acpi cpu="">on acpi0
                pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                pci0: <acpi pci="" bus="">on pcib0
                pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
                pci26: <acpi pci="" bus="">on pcib1
                pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
                pci31: <acpi pci="" bus="">on pcib2
                igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d80000-0x91dfffff,0x91e
                0c000-0x91e0ffff irq 16 at device 0.0 on pci31
                igb0: Using MSIX interrupts with 5 vectors
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb0: [ITHREAD]
                igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d00000-0x91d7ffff,0x91e08000-0x91e0bfff irq 17 at device 0.1 on pci31
                igb1: Using MSIX interrupts with 5 vectors
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb1: [ITHREAD]
                igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c80000-0x91cfffff,0x91e04000-0x91e07fff irq 18 at device 0.2 on pci31
                igb2: Using MSIX interrupts with 5 vectors
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb2: [ITHREAD]
                igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c00000-0x91c7ffff,0x91e00000-0x91e03fff irq 19 at device 0.3 on pci31
                igb3: Using MSIX interrupts with 5 vectors
                igb3: [ITHREAD]
                :</intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi>

                1 Reply Last reply Reply Quote 0
                • W
                  wallabybob
                  last edited by

                  Please post the full dmesg output from the HD boot. The snippet doesn't show what I'm looking for. In particular, comparing the two snippets:

                  @Brutal:

                  pci0: <base peripheral=""> at device 8.0 (no driver attached)
                  pci0: <base peripheral=""> at device 8.1 (no driver attached)
                  pci0: <base peripheral=""> at device 8.2 (no driver attached)
                  pci0: <base peripheral=""> at device 8.3 (no driver attached)
                  pci0: <base peripheral=""> at device 16.0 (no driver attached)
                  pci0: <base peripheral=""> at device 16.1 (no driver attached)

                  This shows device numbers 8 and 16 on pci bus 0 which doesn't match any of
                  @Brutal:

                  igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d80000-0x91dfffff,0x91e
                  0c000-0x91e0ffff irq 16 at device 0.0 on pci31

                  igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d00000-0x91d7ffff,0x91e08000-0x91e0bfff irq 17 at device 0.1 on pci31

                  igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c80000-0x91cfffff,0x91e04000-0x91e07fff irq 18 at device 0.2 on pci31

                  igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c00000-0x91c7ffff,0x91e00000-0x91e03fff irq 19 at device 0.3 on pci31</intel(r)></intel(r)></intel(r)></intel(r)>

                  which are all device number 0 on pci bus 31.

                  @Brutal:

                  How would I check for the driver.  If there, do I just modprobe it?

                  pfSense normally includes all the NIC drivers in the built kernel, rather than as separate loadable modules.

                  1 Reply Last reply Reply Quote 0
                  • B
                    Brutal
                    last edited by

                    LiveCD full dmesg.  HD boot dmesg to follow

                    Copyright © 1992-2010 The FreeBSD Project.
                    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                            The Regents of the University of California. All rights reserved.
                    FreeBSD is a registered trademark of The FreeBSD Foundation.
                    FreeBSD 8.1-RELEASE-p2 #0: Thu Feb 10 20:45:27 EST 2011
                        sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
                    Timecounter "i8254" frequency 1193182 Hz quality 0
                    CPU: Intel(R) Xeon(R) CPU          X3450  @ 2.67GHz (2660.00-MHz 686-class CPU)
                      Origin = "GenuineIntel"  Id = 0x106e5  Family = 6  Model = 1e  Stepping = 5
                      Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x98e3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                    real memory  = 4294967296 (4096 MB)
                    avail memory = 2072043520 (1976 MB)
                    ACPI APIC Table: <ibm   ="" foxhollw="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                    FreeBSD/SMP: 1 package(s) x 4 core(s)
                    cpu0 (BSP): APIC ID:  0
                    cpu1 (AP): APIC ID:  2
                    cpu2 (AP): APIC ID:  4
                    cpu3 (AP): APIC ID:  6
                    ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20100331/tbfadt-707)
                    ioapic0 <version 2.0="">irqs 0-23 on motherboard
                    wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                    wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                    module_register_init: MOD_LOAD (wpi_fw, 0xc095c280, 0) error 1
                    ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                    ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                    module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07672e0, 0) error 1
                    ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                    ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                    module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07673a0, 0) error 1
                    ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                    ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                    module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0767460, 0) error 1
                    wlan: mac acl policy registered
                    kbd1 at kbdmux0
                    cryptosoft0: <software crypto="">on motherboard
                    padlock0: No ACE support.
                    acpi0: <ibm foxhollw="">on motherboard
                    acpi0: [ITHREAD]
                    acpi0: Power Button (fixed)
                    Timecounter "HPET" frequency 14318180 Hz quality 900
                    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
                    cpu0: <acpi cpu="">on acpi0
                    cpu1: <acpi cpu="">on acpi0
                    cpu2: <acpi cpu="">on acpi0
                    cpu3: <acpi cpu="">on acpi0
                    pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                    pci0: <acpi pci="" bus="">on pcib0
                    pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
                    pci26: <acpi pci="" bus="">on pcib1
                    pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
                    pci31: <acpi pci="" bus="">on pcib2
                    igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d80000-0x91dfffff,0x91e0c000-0x91e0ffff irq 16 at device 0.0 on pci31
                    igb0: Using MSIX interrupts with 5 vectors
                    igb0: [ITHREAD]
                    igb0: [ITHREAD]
                    igb0: [ITHREAD]
                    igb0: [ITHREAD]
                    igb0: [ITHREAD]
                    igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d00000-0x91d7ffff,0x91e08000-0x91e0bfff irq 17 at device 0.1 on pci31
                    igb1: Using MSIX interrupts with 5 vectors
                    igb1: [ITHREAD]
                    igb1: [ITHREAD]
                    igb1: [ITHREAD]
                    igb1: [ITHREAD]
                    igb1: [ITHREAD]
                    igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c80000-0x91cfffff,0x91e04000-0x91e07fff irq 18 at device 0.2 on pci31
                    igb2: Using MSIX interrupts with 5 vectors
                    igb2: [ITHREAD]
                    igb2: [ITHREAD]
                    igb2: [ITHREAD]
                    igb2: [ITHREAD]
                    igb2: [ITHREAD]
                    igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c00000-0x91c7ffff,0x91e00000-0x91e03fff irq 19 at device 0.3 on pci31
                    igb3: Using MSIX interrupts with 5 vectors
                    igb3: [ITHREAD]
                    igb3: [ITHREAD]
                    igb3: [ITHREAD]
                    igb3: [ITHREAD]
                    igb3: [ITHREAD]
                    pci0: <base peripheral=""> at device 8.0 (no driver attached)
                    pci0: <base peripheral=""> at device 8.1 (no driver attached)
                    pci0: <base peripheral=""> at device 8.2 (no driver attached)
                    pci0: <base peripheral=""> at device 8.3 (no driver attached)
                    pci0: <base peripheral=""> at device 16.0 (no driver attached)
                    pci0: <base peripheral=""> at device 16.1 (no driver attached)
                    ehci0: <intel pch="" usb="" 2.0="" controller="" usb-b="">mem 0x91f01000-0x91f013ff irq 19 at device 26.0 on pci0
                    ehci0: [ITHREAD]
                    usbus0: EHCI version 1.0
                    usbus0: <intel pch="" usb="" 2.0="" controller="" usb-b="">on ehci0
                    pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.0 on pci0
                    pci1: <acpi pci="" bus="">on pcib3
                    mpt0: <lsilogic sas="" sata="" adapter="">port 0x3000-0x30ff mem 0x91b10000-0x91b13fff,0x91b00000-0x91b0ffff irq 16 at device 0.0 on pci1
                    mpt0: [ITHREAD]
                    mpt0: MPI Version=1.5.20.0
                    mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                    mpt0: 0 Active Volumes (2 Max)
                    mpt0: 0 Hidden Drive Members (14 Max)
                    pcib4: <acpi pci-pci="" bridge="">irq 17 at device 28.4 on pci0
                    pci6: <acpi pci="" bus="">on pcib4
                    pcib5: <pci-pci bridge="">irq 16 at device 0.0 on pci6
                    pci7: <pci bus="">on pcib5
                    vgapci0: <vga-compatible display="">mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff at device 0.0 on pci7
                    pcib6: <acpi pci-pci="" bridge="">irq 16 at device 28.5 on pci0
                    pci11: <acpi pci="" bus="">on pcib6
                    em0: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x2000-0x201f mem 0x91a80000-0x91a9ffff,0x91a00000-0x91a7ffff,0x91aa0000-0x91aa3fff irq 17 at device 0.0 on pci11
                    em0: Using MSIX interrupts with 3 vectors
                    em0: [ITHREAD]
                    em0: [ITHREAD]
                    em0: [ITHREAD]
                    pcib7: <acpi pci-pci="" bridge="">irq 18 at device 28.6 on pci0
                    pci16: <acpi pci="" bus="">on pcib7
                    pcib8: <acpi pci-pci="" bridge="">irq 19 at device 28.7 on pci0
                    pci21: <acpi pci="" bus="">on pcib8
                    em1: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x1000-0x101f mem 0x91980000-0x9199ffff,0x91900000-0x9197ffff,0x919a0000-0x919a3fff irq 19 at device 0.0 on pci21
                    em1: Using MSIX interrupts with 3 vectors
                    em1: [ITHREAD]
                    em1: [ITHREAD]
                    em1: [ITHREAD]
                    ehci1: <intel pch="" usb="" 2.0="" controller="" usb-a="">mem 0x91f00000-0x91f003ff irq 19 at device 29.0 on pci0
                    ehci1: [ITHREAD]
                    usbus1: EHCI version 1.0
                    usbus1: <intel pch="" usb="" 2.0="" controller="" usb-a="">on ehci1
                    pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                    pci36: <acpi pci="" bus="">on pcib9
                    isab0: <pci-isa bridge="">at device 31.0 on pci0
                    isa0: <isa bus="">on isab0
                    atapci0: <intel pch="" sata300="" controller="">port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4050-0x405f,0x4040-0x404f irq 19 at device 31.2 on pci0
                    atapci0: [ITHREAD]
                    ata2: <ata 0="" channel="">on atapci0
                    ata2: [ITHREAD]
                    ata3: <ata 1="" channel="">on atapci0
                    ata3: [ITHREAD]
                    pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                    atapci1: <intel pch="" sata300="" controller="">port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4030-0x403f,0x4020-0x402f irq 18 at device 31.5 on pci0
                    atapci1: [ITHREAD]
                    ata4: <ata 0="" channel="">on atapci1
                    ata4: [ITHREAD]
                    ata5: <ata 1="" channel="">on atapci1
                    ata5: [ITHREAD]
                    acpi_button0: <power button="">on acpi0
                    acpi_button0: enable wake failed
                    atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
                    atrtc0: Warning: Couldn't map I/O.
                    uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                    uart0: [FILTER]
                    uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                    uart1: [FILTER]
                    pmtimer0 on isa0
                    orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0
                    sc0: <system console="">at flags 0x100 on isa0
                    sc0: VGA <16 virtual consoles, flags=0x300>
                    vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                    ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                    ata0: [ITHREAD]
                    ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                    ata1: [ITHREAD]
                    atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                    atkbd0: <at keyboard="">irq 1 on atkbdc0
                    kbd0 at atkbd0
                    atkbd0: [GIANT-LOCKED]
                    atkbd0: [ITHREAD]
                    ppc0: parallel port not found.
                    est0: <enhanced speedstep="" frequency="" control="">on cpu0
                    p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                    est1: <enhanced speedstep="" frequency="" control="">on cpu1
                    p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                    est2: <enhanced speedstep="" frequency="" control="">on cpu2
                    p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
                    est3: <enhanced speedstep="" frequency="" control="">on cpu3
                    p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
                    RTC BIOS diagnostic error 80 <clock_battery>Timecounters tick every 1.000 msec
                    IPsec: Initialized Security Association Processing.
                    usbus0: 480Mbps High Speed USB v2.0
                    usbus1: 480Mbps High Speed USB v2.0
                    ugen0.1: <intel>at usbus0
                    uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
                    ugen1.1: <intel>at usbus1
                    uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
                    uhub0: 2 ports with 2 removable, self powered
                    uhub1: 2 ports with 2 removable, self powered
                    ugen0.2: <vendor 0x8087="">at usbus0
                    uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus0
                    ugen1.2: <vendor 0x8087="">at usbus1
                    uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
                    acd0: DVDR <tsstcorp cddvdw="" ts-l633b="" ib03="">at ata4-master UDMA100 SATA 1.5Gb/s
                    da0 at mpt0 bus 0 scbus0 target 1 lun 0
                    da0: <ibm-esxs vpca300900est1="" n="" a3c0="">Fixed Direct Access SCSI-6 device
                    da0: 300.000MB/s transfers
                    da0: Command Queueing enabled
                    da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
                    SMP: AP CPU #3 Launched!
                    SMP: AP CPU #1 Launched!
                    SMP: AP CPU #2 Launched!
                    uhub2: 6 ports with 6 removable, self powered
                    uhub3: 6 ports with 6 removable, self powered
                    ugen0.3: <ibm>at usbus0
                    ugen1.3: <logitech>at usbus1
                    ukbd0: <usb keyboard="">on usbus1
                    kbd2 at ukbd0
                    uhid0: <usb keyboard="">on usbus1
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
                    Trying to mount root from cd9660:/dev/iso9660/pfSense
                    md0.uzip: 2448 x 65536 blocks
                    pflog0: promiscuous mode enabled</usb></usb></logitech></ibm></ibm-esxs></tsstcorp></vendor></vendor></vendor></vendor></intel></intel></intel></intel></clock_battery></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></power></ata></ata></intel></serial></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel(r)></acpi></acpi></acpi></acpi></intel(r)></acpi></acpi></vga-compatible></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></intel></intel></intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></ibm></software></version></ibm ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

                    1 Reply Last reply Reply Quote 0
                    • B
                      Brutal
                      last edited by

                      dmesg of HD install

                      Copyright © 1992-2010 The FreeBSD Project.
                      Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                              The Regents of the University of California. All rights reserved.
                      FreeBSD is a registered trademark of The FreeBSD Foundation.
                      FreeBSD 8.1-RELEASE-p2 #1: Mon Feb 14 02:00:18 EST 2011
                          root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense.8 i386
                      Timecounter "i8254" frequency 1193182 Hz quality 0
                      CPU: Intel(R) Xeon(R) CPU          X3450  @ 2.67GHz (2660.00-MHz 686-class CPU)
                        Origin = "GenuineIntel"  Id = 0x106e5  Family = 6  Model = 1e  Stepping = 5
                        Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x98e3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
                      real memory  = 4294967296 (4096 MB)
                      avail memory = 2071941120 (1975 MB)
                      ACPI APIC Table: <ibm   ="" foxhollw="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
                      FreeBSD/SMP: 1 package(s) x 4 core(s)
                      cpu0 (BSP): APIC ID:  0
                      cpu1 (AP): APIC ID:  2
                      cpu2 (AP): APIC ID:  4
                      cpu3 (AP): APIC ID:  6
                      ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20100331/tbfadt-707)
                      ioapic0 <version 2.0="">irqs 0-23 on motherboard
                      wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
                      wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (wpi_fw, 0xc0958c30, 0) error 1
                      ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                      ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07643f0, 0) error 1
                      ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                      ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07644b0, 0) error 1
                      ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
                      ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
                      module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0764570, 0) error 1
                      wlan: mac acl policy registered
                      kbd1 at kbdmux0
                      cryptosoft0: <software crypto="">on motherboard
                      padlock0: No ACE support.
                      acpi0: <ibm foxhollw="">on motherboard
                      acpi0: [ITHREAD]
                      acpi0: Power Button (fixed)
                      Timecounter "HPET" frequency 14318180 Hz quality 900
                      Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
                      acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
                      cpu0: <acpi cpu="">on acpi0
                      cpu1: <acpi cpu="">on acpi0
                      cpu2: <acpi cpu="">on acpi0
                      cpu3: <acpi cpu="">on acpi0
                      pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
                      pci0: <acpi pci="" bus="">on pcib0
                      pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
                      pci26: <acpi pci="" bus="">on pcib1
                      pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
                      pci31: <acpi pci="" bus="">on pcib2
                      pci0: <base peripheral=""> at device 8.0 (no driver attached)
                      pci0: <base peripheral=""> at device 8.1 (no driver attached)
                      pci0: <base peripheral=""> at device 8.2 (no driver attached)
                      pci0: <base peripheral=""> at device 8.3 (no driver attached)
                      pci0: <base peripheral=""> at device 16.0 (no driver attached)
                      pci0: <base peripheral=""> at device 16.1 (no driver attached)
                      ehci0: <intel pch="" usb="" 2.0="" controller="" usb-b="">mem 0x91c01000-0x91c013ff irq 19 at device 26.0 on pci0
                      ehci0: [ITHREAD]
                      usbus0: EHCI version 1.0
                      usbus0: <intel pch="" usb="" 2.0="" controller="" usb-b="">on ehci0
                      pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.0 on pci0
                      pci1: <acpi pci="" bus="">on pcib3
                      mpt0: <lsilogic sas="" sata="" adapter="">port 0x3000-0x30ff mem 0x91b10000-0x91b13fff,0x91b00000-0x91b0ffff irq 16 at device 0.0 on pci1
                      mpt0: [ITHREAD]
                      mpt0: MPI Version=1.5.20.0
                      mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
                      mpt0: 0 Active Volumes (2 Max)
                      mpt0: 0 Hidden Drive Members (14 Max)
                      pcib4: <acpi pci-pci="" bridge="">irq 17 at device 28.4 on pci0
                      pci6: <acpi pci="" bus="">on pcib4
                      pcib5: <pci-pci bridge="">irq 16 at device 0.0 on pci6
                      pci7: <pci bus="">on pcib5
                      vgapci0: <vga-compatible display="">mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff at device 0.0 on pci7
                      pcib6: <acpi pci-pci="" bridge="">irq 16 at device 28.5 on pci0
                      pci11: <acpi pci="" bus="">on pcib6
                      em0: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x2000-0x201f mem 0x91a80000-0x91a9ffff,0x91a00000-0x91a7ffff,0x91aa0000-0x91aa3fff irq 17 at device 0.0 on pci11
                      em0: Using MSIX interrupts with 3 vectors
                      em0: [ITHREAD]
                      em0: [ITHREAD]
                      em0: [ITHREAD]
                      pcib7: <acpi pci-pci="" bridge="">irq 18 at device 28.6 on pci0
                      pci16: <acpi pci="" bus="">on pcib7
                      pcib8: <acpi pci-pci="" bridge="">irq 19 at device 28.7 on pci0
                      pci21: <acpi pci="" bus="">on pcib8
                      em1: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x1000-0x101f mem 0x91980000-0x9199ffff,0x91900000-0x9197ffff,0x919a0000-0x919a3fff irq 19 at device 0.0 on pci21
                      em1: Using MSIX interrupts with 3 vectors
                      em1: [ITHREAD]
                      em1: [ITHREAD]
                      em1: [ITHREAD]
                      ehci1: <intel pch="" usb="" 2.0="" controller="" usb-a="">mem 0x91c00000-0x91c003ff irq 19 at device 29.0 on pci0
                      ehci1: [ITHREAD]
                      usbus1: EHCI version 1.0
                      usbus1: <intel pch="" usb="" 2.0="" controller="" usb-a="">on ehci1
                      pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
                      pci36: <acpi pci="" bus="">on pcib9
                      isab0: <pci-isa bridge="">at device 31.0 on pci0
                      isa0: <isa bus="">on isab0
                      atapci0: <intel pch="" sata300="" controller="">port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4050-0x405f,0x4040-0x404f irq 19 at device 31.2 on pci0
                      atapci0: [ITHREAD]
                      ata2: <ata 0="" channel="">on atapci0
                      ata2: [ITHREAD]
                      ata3: <ata 1="" channel="">on atapci0
                      ata3: [ITHREAD]
                      pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
                      atapci1: <intel pch="" sata300="" controller="">port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4030-0x403f,0x4020-0x402f irq 18 at device 31.5 on pci0
                      atapci1: [ITHREAD]
                      ata4: <ata 0="" channel="">on atapci1
                      ata4: [ITHREAD]
                      ata5: <ata 1="" channel="">on atapci1
                      ata5: [ITHREAD]
                      acpi_button0: <power button="">on acpi0
                      acpi_button0: enable wake failed
                      atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
                      atrtc0: Warning: Couldn't map I/O.
                      uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
                      uart0: [FILTER]
                      uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
                      uart1: [FILTER]
                      pmtimer0 on isa0
                      orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0
                      sc0: <system console="">at flags 0x100 on isa0
                      sc0: VGA <16 virtual consoles, flags=0x300>
                      vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
                      ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
                      ata0: [ITHREAD]
                      ata1 at port 0x170-0x177,0x376 irq 15 on isa0
                      ata1: [ITHREAD]
                      atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
                      atkbd0: <at keyboard="">irq 1 on atkbdc0
                      kbd0 at atkbd0
                      atkbd0: [GIANT-LOCKED]
                      atkbd0: [ITHREAD]
                      ppc0: parallel port not found.
                      est0: <enhanced speedstep="" frequency="" control="">on cpu0
                      p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
                      est1: <enhanced speedstep="" frequency="" control="">on cpu1
                      p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
                      est2: <enhanced speedstep="" frequency="" control="">on cpu2
                      p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
                      est3: <enhanced speedstep="" frequency="" control="">on cpu3
                      p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
                      RTC BIOS diagnostic error 80 <clock_battery>Timecounters tick every 1.000 msec
                      IPsec: Initialized Security Association Processing.
                      usbus0: 480Mbps High Speed USB v2.0
                      usbus1: 480Mbps High Speed USB v2.0
                      ugen0.1: <intel>at usbus0
                      uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
                      ugen1.1: <intel>at usbus1
                      uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
                      uhub0: 2 ports with 2 removable, self powered
                      uhub1: 2 ports with 2 removable, self powered
                      ugen0.2: <vendor 0x8087="">at usbus0
                      uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus0
                      ugen1.2: <vendor 0x8087="">at usbus1
                      uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
                      da0 at mpt0 bus 0 scbus0 target 1 lun 0
                      da0: <ibm-esxs vpca300900est1="" n="" a3c0="">Fixed Direct Access SCSI-6 device
                      da0: 300.000MB/s transfers
                      da0: Command Queueing enabled
                      da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
                      acd0: DVDR <tsstcorp cddvdw="" ts-l633b="" ib03="">at ata4-master UDMA100 SATA 1.5Gb/s
                      SMP: AP CPU #3 Launched!
                      SMP: AP CPU #1 Launched!
                      SMP: AP CPU #2 Launched!
                      Root mount waiting for: usbus1 usbus0
                      uhub2: 6 ports with 6 removable, self powered
                      uhub3: 8 ports with 8 removable, self powered
                      Root mount waiting for: usbus1 usbus0
                      ugen0.3: <ibm>at usbus0
                      ugen1.3: <logitech>at usbus1
                      ukbd0: <usb keyboard="">on usbus1
                      kbd2 at ukbd0
                      uhid0: <usb keyboard="">on usbus1
                      Trying to mount root from ufs:/dev/da0s1a
                      WARNING: / was not properly dismounted
                      WARNING: R/W mount of / denied.  Filesystem is not clean - run fsck
                      pflog0: promiscuous mode enabled
                      em1: link state changed to UP
                      em0: link state changed to UP</usb></usb></logitech></ibm></tsstcorp></ibm-esxs></vendor></vendor></vendor></vendor></intel></intel></intel></intel></clock_battery></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></power></ata></ata></intel></serial></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel(r)></acpi></acpi></acpi></acpi></intel(r)></acpi></acpi></vga-compatible></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></intel></intel></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></ibm></software></version></ibm ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

                      1 Reply Last reply Reply Quote 0
                      • W
                        wallabybob
                        last edited by

                        It looks as if the devices on pci bus 31 (igb0 through igb3) are not visible in the pci device tree at startup in the HD boot you have logged. If the devices had been visible but unrecognised by any driver I would have expected the startup to report something like:

                        pci31: <network, ethernet="">at device 0.0 (no driver attached)</network,>

                        I have no explanation for why the devices might be visible in the PCI device tree on booting from CD but not on from booting from HD.

                        Could you provide the output of pfSense shell command # pciconf -l -v after booting from HD?

                        Do you see any different behaviour if you

                        • move the igb devices to another slot

                        • turn off the power, wait at least 20 seconds then boot from HD

                        1 Reply Last reply Reply Quote 0
                        • R
                          richc
                          last edited by

                          Sorry for the long delay in getting back, I reinstalled with uniprocessor kernel and fixed the kernel  parameter to 4 and it seems to be OK now.

                          How I am just starting testing with LAGGS and trunked VLANs

                          1 Reply Last reply Reply Quote 0
                          • B
                            Brutal
                            last edited by

                            Richc - That's good news.  I didn't intend to hijack your thread, I thought our issues may be similar dealing with the quad cards.

                            Wallybybob  - I pulled the server from our co-lo facility and brought it back to the office.  Upon boot, the HD install saw the card.  Thinking about your last advice about pulling power and how that's in effect what I had just done, I proceeded to do several boots, by pulling power and also by software restarts.

                            Each time the server was booted cold, it saw the card.  Each time the server was soft restarted, it didn't.

                            I went back through the BIOS settings and found a setting for the PCI.  Settings were for Gen1 or Gen2 device.  It was set for Gen1.  I set it for Gen2.  Seems to be working now.  I should have seen that before.

                            I'm going to do some changes to the hyperthreading and SMP install to see what the effects are and I'll post the results.  Thanks again Wally.

                            1 Reply Last reply Reply Quote 0
                            • W
                              wallabybob
                              last edited by

                              @Brutal:

                              I went back through the BIOS settings and found a setting for the PCI.  Settings were for Gen1 or Gen2 device.  It was set for Gen1.  I set it for Gen2.  Seems to be working now.  I should have seen that before.

                              First time I've heard of anything like that: a BIOS switch to hide PCI devices on restart, And so aptly named  :)

                              Well done.

                              1 Reply Last reply Reply Quote 0
                              • B
                                Brutal
                                last edited by

                                After the bios "Gen2" change, it doesn't matter whether hyperthreading is active, or if the SMP kernel is installed, or both.  Works fine.

                                It also doesn't matter whether the hw.igb.num_queues is set for 2 or 4.

                                In case anyone is interested, this is on an IBM x3250 M3 server with a I340-4t quad card.  It is a bit finicky about having power pulled and reapplied.  Tends to lock up internals if you don't wait a bit.  It's also a very long boot process.  This runs the UEFI bios change.

                                I'll be installing a twin for CARP soon.  Just love pf.

                                Thanks again for your assistance.

                                1 Reply Last reply Reply Quote 0
                                • W
                                  wallabybob
                                  last edited by

                                  @Brutal:

                                  It also doesn't matter whether the hw.igb.num_queues is set for 2 or 4.

                                  I suspect that it will matter if you have "enough" cores or "enough" cards.

                                  1 Reply Last reply Reply Quote 0
                                  • First post
                                    Last post
                                  Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.