Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Pfsesen iGB driver support - aka my box keeps crashing/network hangs

    Scheduled Pinned Locked Moved 2.0-RC Snapshot Feedback and Problems - RETIRED
    18 Posts 4 Posters 7.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      Brutal
      last edited by

      Thank you Wall….

      I wonder if Richc ever got his going.

      On mine, I disabled Hyperthreading
      boot the LiveCD  I was on the Feb 5th load.  Today I'm on the RC1 load (just downloaded). Same issue
      LiveCD detects the quad card (I340-T4) and gives the "Receive Structures" error.  But it sees the ports.
      I added the hw.igb.num_queues=2 to new loader.conf.local file
      installed to hard disk with Uniprocessor load
      after boot to hard disk, the igb driver doesn't get attached.

      This makes me think there is more differences to the livecd vs hd install.

      cpu0: <acpi cpu="">on acpi0
      cpu1: <acpi cpu="">on acpi0
      cpu2: <acpi cpu="">on acpi0
      cpu3: <acpi cpu="">on acpi0
      pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
      pci0: <acpi pci="" bus="">on pcib0
      pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
      pci26: <acpi pci="" bus="">on pcib1
      pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
      pci31: <acpi pci="" bus="">on pcib2
      pci0: <base peripheral=""> at device 8.0 (no driver attached)
      pci0: <base peripheral=""> at device 8.1 (no driver attached)
      pci0: <base peripheral=""> at device 8.2 (no driver attached)
      pci0: <base peripheral=""> at device 8.3 (no driver attached)
      pci0: <base peripheral=""> at device 16.0 (no driver attached)
      pci0: <base peripheral=""> at device 16.1 (no driver attached)

      Why would the driver not be loaded with both LiveCD and HD install.
      I'm not very familiar with Freebsd.  How would I check for the driver.  If there, do I just modprobe it?</acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi>

      1 Reply Last reply Reply Quote 0
      • B
        Brutal
        last edited by

        Here's the dmesg snippet from the LiveCD:

        cpu0: <acpi cpu="">on acpi0
        cpu1: <acpi cpu="">on acpi0
        cpu2: <acpi cpu="">on acpi0
        cpu3: <acpi cpu="">on acpi0
        pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
        pci0: <acpi pci="" bus="">on pcib0
        pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
        pci26: <acpi pci="" bus="">on pcib1
        pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
        pci31: <acpi pci="" bus="">on pcib2
        igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d80000-0x91dfffff,0x91e
        0c000-0x91e0ffff irq 16 at device 0.0 on pci31
        igb0: Using MSIX interrupts with 5 vectors
        igb0: [ITHREAD]
        igb0: [ITHREAD]
        igb0: [ITHREAD]
        igb0: [ITHREAD]
        igb0: [ITHREAD]
        igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d00000-0x91d7ffff,0x91e08000-0x91e0bfff irq 17 at device 0.1 on pci31
        igb1: Using MSIX interrupts with 5 vectors
        igb1: [ITHREAD]
        igb1: [ITHREAD]
        igb1: [ITHREAD]
        igb1: [ITHREAD]
        igb1: [ITHREAD]
        igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c80000-0x91cfffff,0x91e04000-0x91e07fff irq 18 at device 0.2 on pci31
        igb2: Using MSIX interrupts with 5 vectors
        igb2: [ITHREAD]
        igb2: [ITHREAD]
        igb2: [ITHREAD]
        igb2: [ITHREAD]
        igb2: [ITHREAD]
        igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c00000-0x91c7ffff,0x91e00000-0x91e03fff irq 19 at device 0.3 on pci31
        igb3: Using MSIX interrupts with 5 vectors
        igb3: [ITHREAD]
        :</intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi>

        1 Reply Last reply Reply Quote 0
        • W
          wallabybob
          last edited by

          Please post the full dmesg output from the HD boot. The snippet doesn't show what I'm looking for. In particular, comparing the two snippets:

          @Brutal:

          pci0: <base peripheral=""> at device 8.0 (no driver attached)
          pci0: <base peripheral=""> at device 8.1 (no driver attached)
          pci0: <base peripheral=""> at device 8.2 (no driver attached)
          pci0: <base peripheral=""> at device 8.3 (no driver attached)
          pci0: <base peripheral=""> at device 16.0 (no driver attached)
          pci0: <base peripheral=""> at device 16.1 (no driver attached)

          This shows device numbers 8 and 16 on pci bus 0 which doesn't match any of
          @Brutal:

          igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d80000-0x91dfffff,0x91e
          0c000-0x91e0ffff irq 16 at device 0.0 on pci31

          igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d00000-0x91d7ffff,0x91e08000-0x91e0bfff irq 17 at device 0.1 on pci31

          igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c80000-0x91cfffff,0x91e04000-0x91e07fff irq 18 at device 0.2 on pci31

          igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c00000-0x91c7ffff,0x91e00000-0x91e03fff irq 19 at device 0.3 on pci31</intel(r)></intel(r)></intel(r)></intel(r)>

          which are all device number 0 on pci bus 31.

          @Brutal:

          How would I check for the driver.  If there, do I just modprobe it?

          pfSense normally includes all the NIC drivers in the built kernel, rather than as separate loadable modules.

          1 Reply Last reply Reply Quote 0
          • B
            Brutal
            last edited by

            LiveCD full dmesg.  HD boot dmesg to follow

            Copyright © 1992-2010 The FreeBSD Project.
            Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                    The Regents of the University of California. All rights reserved.
            FreeBSD is a registered trademark of The FreeBSD Foundation.
            FreeBSD 8.1-RELEASE-p2 #0: Thu Feb 10 20:45:27 EST 2011
                sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
            Timecounter "i8254" frequency 1193182 Hz quality 0
            CPU: Intel(R) Xeon(R) CPU          X3450  @ 2.67GHz (2660.00-MHz 686-class CPU)
              Origin = "GenuineIntel"  Id = 0x106e5  Family = 6  Model = 1e  Stepping = 5
              Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x98e3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
            real memory  = 4294967296 (4096 MB)
            avail memory = 2072043520 (1976 MB)
            ACPI APIC Table: <ibm   ="" foxhollw="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
            FreeBSD/SMP: 1 package(s) x 4 core(s)
            cpu0 (BSP): APIC ID:  0
            cpu1 (AP): APIC ID:  2
            cpu2 (AP): APIC ID:  4
            cpu3 (AP): APIC ID:  6
            ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20100331/tbfadt-707)
            ioapic0 <version 2.0="">irqs 0-23 on motherboard
            wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
            wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
            module_register_init: MOD_LOAD (wpi_fw, 0xc095c280, 0) error 1
            ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
            ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
            module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07672e0, 0) error 1
            ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
            ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
            module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07673a0, 0) error 1
            ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
            ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
            module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0767460, 0) error 1
            wlan: mac acl policy registered
            kbd1 at kbdmux0
            cryptosoft0: <software crypto="">on motherboard
            padlock0: No ACE support.
            acpi0: <ibm foxhollw="">on motherboard
            acpi0: [ITHREAD]
            acpi0: Power Button (fixed)
            Timecounter "HPET" frequency 14318180 Hz quality 900
            Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
            acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
            cpu0: <acpi cpu="">on acpi0
            cpu1: <acpi cpu="">on acpi0
            cpu2: <acpi cpu="">on acpi0
            cpu3: <acpi cpu="">on acpi0
            pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
            pci0: <acpi pci="" bus="">on pcib0
            pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
            pci26: <acpi pci="" bus="">on pcib1
            pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
            pci31: <acpi pci="" bus="">on pcib2
            igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d80000-0x91dfffff,0x91e0c000-0x91e0ffff irq 16 at device 0.0 on pci31
            igb0: Using MSIX interrupts with 5 vectors
            igb0: [ITHREAD]
            igb0: [ITHREAD]
            igb0: [ITHREAD]
            igb0: [ITHREAD]
            igb0: [ITHREAD]
            igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91d00000-0x91d7ffff,0x91e08000-0x91e0bfff irq 17 at device 0.1 on pci31
            igb1: Using MSIX interrupts with 5 vectors
            igb1: [ITHREAD]
            igb1: [ITHREAD]
            igb1: [ITHREAD]
            igb1: [ITHREAD]
            igb1: [ITHREAD]
            igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c80000-0x91cfffff,0x91e04000-0x91e07fff irq 18 at device 0.2 on pci31
            igb2: Using MSIX interrupts with 5 vectors
            igb2: [ITHREAD]
            igb2: [ITHREAD]
            igb2: [ITHREAD]
            igb2: [ITHREAD]
            igb2: [ITHREAD]
            igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.0.7="">mem 0x91c00000-0x91c7ffff,0x91e00000-0x91e03fff irq 19 at device 0.3 on pci31
            igb3: Using MSIX interrupts with 5 vectors
            igb3: [ITHREAD]
            igb3: [ITHREAD]
            igb3: [ITHREAD]
            igb3: [ITHREAD]
            igb3: [ITHREAD]
            pci0: <base peripheral=""> at device 8.0 (no driver attached)
            pci0: <base peripheral=""> at device 8.1 (no driver attached)
            pci0: <base peripheral=""> at device 8.2 (no driver attached)
            pci0: <base peripheral=""> at device 8.3 (no driver attached)
            pci0: <base peripheral=""> at device 16.0 (no driver attached)
            pci0: <base peripheral=""> at device 16.1 (no driver attached)
            ehci0: <intel pch="" usb="" 2.0="" controller="" usb-b="">mem 0x91f01000-0x91f013ff irq 19 at device 26.0 on pci0
            ehci0: [ITHREAD]
            usbus0: EHCI version 1.0
            usbus0: <intel pch="" usb="" 2.0="" controller="" usb-b="">on ehci0
            pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.0 on pci0
            pci1: <acpi pci="" bus="">on pcib3
            mpt0: <lsilogic sas="" sata="" adapter="">port 0x3000-0x30ff mem 0x91b10000-0x91b13fff,0x91b00000-0x91b0ffff irq 16 at device 0.0 on pci1
            mpt0: [ITHREAD]
            mpt0: MPI Version=1.5.20.0
            mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
            mpt0: 0 Active Volumes (2 Max)
            mpt0: 0 Hidden Drive Members (14 Max)
            pcib4: <acpi pci-pci="" bridge="">irq 17 at device 28.4 on pci0
            pci6: <acpi pci="" bus="">on pcib4
            pcib5: <pci-pci bridge="">irq 16 at device 0.0 on pci6
            pci7: <pci bus="">on pcib5
            vgapci0: <vga-compatible display="">mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff at device 0.0 on pci7
            pcib6: <acpi pci-pci="" bridge="">irq 16 at device 28.5 on pci0
            pci11: <acpi pci="" bus="">on pcib6
            em0: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x2000-0x201f mem 0x91a80000-0x91a9ffff,0x91a00000-0x91a7ffff,0x91aa0000-0x91aa3fff irq 17 at device 0.0 on pci11
            em0: Using MSIX interrupts with 3 vectors
            em0: [ITHREAD]
            em0: [ITHREAD]
            em0: [ITHREAD]
            pcib7: <acpi pci-pci="" bridge="">irq 18 at device 28.6 on pci0
            pci16: <acpi pci="" bus="">on pcib7
            pcib8: <acpi pci-pci="" bridge="">irq 19 at device 28.7 on pci0
            pci21: <acpi pci="" bus="">on pcib8
            em1: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x1000-0x101f mem 0x91980000-0x9199ffff,0x91900000-0x9197ffff,0x919a0000-0x919a3fff irq 19 at device 0.0 on pci21
            em1: Using MSIX interrupts with 3 vectors
            em1: [ITHREAD]
            em1: [ITHREAD]
            em1: [ITHREAD]
            ehci1: <intel pch="" usb="" 2.0="" controller="" usb-a="">mem 0x91f00000-0x91f003ff irq 19 at device 29.0 on pci0
            ehci1: [ITHREAD]
            usbus1: EHCI version 1.0
            usbus1: <intel pch="" usb="" 2.0="" controller="" usb-a="">on ehci1
            pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
            pci36: <acpi pci="" bus="">on pcib9
            isab0: <pci-isa bridge="">at device 31.0 on pci0
            isa0: <isa bus="">on isab0
            atapci0: <intel pch="" sata300="" controller="">port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4050-0x405f,0x4040-0x404f irq 19 at device 31.2 on pci0
            atapci0: [ITHREAD]
            ata2: <ata 0="" channel="">on atapci0
            ata2: [ITHREAD]
            ata3: <ata 1="" channel="">on atapci0
            ata3: [ITHREAD]
            pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
            atapci1: <intel pch="" sata300="" controller="">port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4030-0x403f,0x4020-0x402f irq 18 at device 31.5 on pci0
            atapci1: [ITHREAD]
            ata4: <ata 0="" channel="">on atapci1
            ata4: [ITHREAD]
            ata5: <ata 1="" channel="">on atapci1
            ata5: [ITHREAD]
            acpi_button0: <power button="">on acpi0
            acpi_button0: enable wake failed
            atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
            atrtc0: Warning: Couldn't map I/O.
            uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
            uart0: [FILTER]
            uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
            uart1: [FILTER]
            pmtimer0 on isa0
            orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0
            sc0: <system console="">at flags 0x100 on isa0
            sc0: VGA <16 virtual consoles, flags=0x300>
            vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
            ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
            ata0: [ITHREAD]
            ata1 at port 0x170-0x177,0x376 irq 15 on isa0
            ata1: [ITHREAD]
            atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
            atkbd0: <at keyboard="">irq 1 on atkbdc0
            kbd0 at atkbd0
            atkbd0: [GIANT-LOCKED]
            atkbd0: [ITHREAD]
            ppc0: parallel port not found.
            est0: <enhanced speedstep="" frequency="" control="">on cpu0
            p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
            est1: <enhanced speedstep="" frequency="" control="">on cpu1
            p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
            est2: <enhanced speedstep="" frequency="" control="">on cpu2
            p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
            est3: <enhanced speedstep="" frequency="" control="">on cpu3
            p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
            RTC BIOS diagnostic error 80 <clock_battery>Timecounters tick every 1.000 msec
            IPsec: Initialized Security Association Processing.
            usbus0: 480Mbps High Speed USB v2.0
            usbus1: 480Mbps High Speed USB v2.0
            ugen0.1: <intel>at usbus0
            uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
            ugen1.1: <intel>at usbus1
            uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
            uhub0: 2 ports with 2 removable, self powered
            uhub1: 2 ports with 2 removable, self powered
            ugen0.2: <vendor 0x8087="">at usbus0
            uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus0
            ugen1.2: <vendor 0x8087="">at usbus1
            uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
            acd0: DVDR <tsstcorp cddvdw="" ts-l633b="" ib03="">at ata4-master UDMA100 SATA 1.5Gb/s
            da0 at mpt0 bus 0 scbus0 target 1 lun 0
            da0: <ibm-esxs vpca300900est1="" n="" a3c0="">Fixed Direct Access SCSI-6 device
            da0: 300.000MB/s transfers
            da0: Command Queueing enabled
            da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
            SMP: AP CPU #3 Launched!
            SMP: AP CPU #1 Launched!
            SMP: AP CPU #2 Launched!
            uhub2: 6 ports with 6 removable, self powered
            uhub3: 6 ports with 6 removable, self powered
            ugen0.3: <ibm>at usbus0
            ugen1.3: <logitech>at usbus1
            ukbd0: <usb keyboard="">on usbus1
            kbd2 at ukbd0
            uhid0: <usb keyboard="">on usbus1
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
            Trying to mount root from cd9660:/dev/iso9660/pfSense
            md0.uzip: 2448 x 65536 blocks
            pflog0: promiscuous mode enabled</usb></usb></logitech></ibm></ibm-esxs></tsstcorp></vendor></vendor></vendor></vendor></intel></intel></intel></intel></clock_battery></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></power></ata></ata></intel></serial></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel(r)></acpi></acpi></acpi></acpi></intel(r)></acpi></acpi></vga-compatible></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></intel></intel></intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></ibm></software></version></ibm ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

            1 Reply Last reply Reply Quote 0
            • B
              Brutal
              last edited by

              dmesg of HD install

              Copyright © 1992-2010 The FreeBSD Project.
              Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                      The Regents of the University of California. All rights reserved.
              FreeBSD is a registered trademark of The FreeBSD Foundation.
              FreeBSD 8.1-RELEASE-p2 #1: Mon Feb 14 02:00:18 EST 2011
                  root@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense.8 i386
              Timecounter "i8254" frequency 1193182 Hz quality 0
              CPU: Intel(R) Xeon(R) CPU          X3450  @ 2.67GHz (2660.00-MHz 686-class CPU)
                Origin = "GenuineIntel"  Id = 0x106e5  Family = 6  Model = 1e  Stepping = 5
                Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x98e3fd <sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt>AMD Features=0x28100000 <nx,rdtscp,lm>AMD Features2=0x1 <lahf>TSC: P-state invariant
              real memory  = 4294967296 (4096 MB)
              avail memory = 2071941120 (1975 MB)
              ACPI APIC Table: <ibm   ="" foxhollw="">FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
              FreeBSD/SMP: 1 package(s) x 4 core(s)
              cpu0 (BSP): APIC ID:  0
              cpu1 (AP): APIC ID:  2
              cpu2 (AP): APIC ID:  4
              cpu3 (AP): APIC ID:  6
              ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20100331/tbfadt-707)
              ioapic0 <version 2.0="">irqs 0-23 on motherboard
              wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.
              wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (wpi_fw, 0xc0958c30, 0) error 1
              ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07643f0, 0) error 1
              ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07644b0, 0) error 1
              ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
              ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
              module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0764570, 0) error 1
              wlan: mac acl policy registered
              kbd1 at kbdmux0
              cryptosoft0: <software crypto="">on motherboard
              padlock0: No ACE support.
              acpi0: <ibm foxhollw="">on motherboard
              acpi0: [ITHREAD]
              acpi0: Power Button (fixed)
              Timecounter "HPET" frequency 14318180 Hz quality 900
              Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
              acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
              cpu0: <acpi cpu="">on acpi0
              cpu1: <acpi cpu="">on acpi0
              cpu2: <acpi cpu="">on acpi0
              cpu3: <acpi cpu="">on acpi0
              pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
              pci0: <acpi pci="" bus="">on pcib0
              pcib1: <acpi pci-pci="" bridge="">irq 16 at device 3.0 on pci0
              pci26: <acpi pci="" bus="">on pcib1
              pcib2: <acpi pci-pci="" bridge="">irq 16 at device 5.0 on pci0
              pci31: <acpi pci="" bus="">on pcib2
              pci0: <base peripheral=""> at device 8.0 (no driver attached)
              pci0: <base peripheral=""> at device 8.1 (no driver attached)
              pci0: <base peripheral=""> at device 8.2 (no driver attached)
              pci0: <base peripheral=""> at device 8.3 (no driver attached)
              pci0: <base peripheral=""> at device 16.0 (no driver attached)
              pci0: <base peripheral=""> at device 16.1 (no driver attached)
              ehci0: <intel pch="" usb="" 2.0="" controller="" usb-b="">mem 0x91c01000-0x91c013ff irq 19 at device 26.0 on pci0
              ehci0: [ITHREAD]
              usbus0: EHCI version 1.0
              usbus0: <intel pch="" usb="" 2.0="" controller="" usb-b="">on ehci0
              pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.0 on pci0
              pci1: <acpi pci="" bus="">on pcib3
              mpt0: <lsilogic sas="" sata="" adapter="">port 0x3000-0x30ff mem 0x91b10000-0x91b13fff,0x91b00000-0x91b0ffff irq 16 at device 0.0 on pci1
              mpt0: [ITHREAD]
              mpt0: MPI Version=1.5.20.0
              mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
              mpt0: 0 Active Volumes (2 Max)
              mpt0: 0 Hidden Drive Members (14 Max)
              pcib4: <acpi pci-pci="" bridge="">irq 17 at device 28.4 on pci0
              pci6: <acpi pci="" bus="">on pcib4
              pcib5: <pci-pci bridge="">irq 16 at device 0.0 on pci6
              pci7: <pci bus="">on pcib5
              vgapci0: <vga-compatible display="">mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff at device 0.0 on pci7
              pcib6: <acpi pci-pci="" bridge="">irq 16 at device 28.5 on pci0
              pci11: <acpi pci="" bus="">on pcib6
              em0: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x2000-0x201f mem 0x91a80000-0x91a9ffff,0x91a00000-0x91a7ffff,0x91aa0000-0x91aa3fff irq 17 at device 0.0 on pci11
              em0: Using MSIX interrupts with 3 vectors
              em0: [ITHREAD]
              em0: [ITHREAD]
              em0: [ITHREAD]
              pcib7: <acpi pci-pci="" bridge="">irq 18 at device 28.6 on pci0
              pci16: <acpi pci="" bus="">on pcib7
              pcib8: <acpi pci-pci="" bridge="">irq 19 at device 28.7 on pci0
              pci21: <acpi pci="" bus="">on pcib8
              em1: <intel(r) 1000="" pro="" network="" connection="" 7.1.9="">port 0x1000-0x101f mem 0x91980000-0x9199ffff,0x91900000-0x9197ffff,0x919a0000-0x919a3fff irq 19 at device 0.0 on pci21
              em1: Using MSIX interrupts with 3 vectors
              em1: [ITHREAD]
              em1: [ITHREAD]
              em1: [ITHREAD]
              ehci1: <intel pch="" usb="" 2.0="" controller="" usb-a="">mem 0x91c00000-0x91c003ff irq 19 at device 29.0 on pci0
              ehci1: [ITHREAD]
              usbus1: EHCI version 1.0
              usbus1: <intel pch="" usb="" 2.0="" controller="" usb-a="">on ehci1
              pcib9: <acpi pci-pci="" bridge="">at device 30.0 on pci0
              pci36: <acpi pci="" bus="">on pcib9
              isab0: <pci-isa bridge="">at device 31.0 on pci0
              isa0: <isa bus="">on isab0
              atapci0: <intel pch="" sata300="" controller="">port 0x4078-0x407f,0x408c-0x408f,0x4070-0x4077,0x4088-0x408b,0x4050-0x405f,0x4040-0x404f irq 19 at device 31.2 on pci0
              atapci0: [ITHREAD]
              ata2: <ata 0="" channel="">on atapci0
              ata2: [ITHREAD]
              ata3: <ata 1="" channel="">on atapci0
              ata3: [ITHREAD]
              pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
              atapci1: <intel pch="" sata300="" controller="">port 0x4068-0x406f,0x4084-0x4087,0x4060-0x4067,0x4080-0x4083,0x4030-0x403f,0x4020-0x402f irq 18 at device 31.5 on pci0
              atapci1: [ITHREAD]
              ata4: <ata 0="" channel="">on atapci1
              ata4: [ITHREAD]
              ata5: <ata 1="" channel="">on atapci1
              ata5: [ITHREAD]
              acpi_button0: <power button="">on acpi0
              acpi_button0: enable wake failed
              atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
              atrtc0: Warning: Couldn't map I/O.
              uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
              uart0: [FILTER]
              uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
              uart1: [FILTER]
              pmtimer0 on isa0
              orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0
              sc0: <system console="">at flags 0x100 on isa0
              sc0: VGA <16 virtual consoles, flags=0x300>
              vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
              ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
              ata0: [ITHREAD]
              ata1 at port 0x170-0x177,0x376 irq 15 on isa0
              ata1: [ITHREAD]
              atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
              atkbd0: <at keyboard="">irq 1 on atkbdc0
              kbd0 at atkbd0
              atkbd0: [GIANT-LOCKED]
              atkbd0: [ITHREAD]
              ppc0: parallel port not found.
              est0: <enhanced speedstep="" frequency="" control="">on cpu0
              p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
              est1: <enhanced speedstep="" frequency="" control="">on cpu1
              p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
              est2: <enhanced speedstep="" frequency="" control="">on cpu2
              p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
              est3: <enhanced speedstep="" frequency="" control="">on cpu3
              p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
              RTC BIOS diagnostic error 80 <clock_battery>Timecounters tick every 1.000 msec
              IPsec: Initialized Security Association Processing.
              usbus0: 480Mbps High Speed USB v2.0
              usbus1: 480Mbps High Speed USB v2.0
              ugen0.1: <intel>at usbus0
              uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
              ugen1.1: <intel>at usbus1
              uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
              uhub0: 2 ports with 2 removable, self powered
              uhub1: 2 ports with 2 removable, self powered
              ugen0.2: <vendor 0x8087="">at usbus0
              uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus0
              ugen1.2: <vendor 0x8087="">at usbus1
              uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x0020,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
              da0 at mpt0 bus 0 scbus0 target 1 lun 0
              da0: <ibm-esxs vpca300900est1="" n="" a3c0="">Fixed Direct Access SCSI-6 device
              da0: 300.000MB/s transfers
              da0: Command Queueing enabled
              da0: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C)
              acd0: DVDR <tsstcorp cddvdw="" ts-l633b="" ib03="">at ata4-master UDMA100 SATA 1.5Gb/s
              SMP: AP CPU #3 Launched!
              SMP: AP CPU #1 Launched!
              SMP: AP CPU #2 Launched!
              Root mount waiting for: usbus1 usbus0
              uhub2: 6 ports with 6 removable, self powered
              uhub3: 8 ports with 8 removable, self powered
              Root mount waiting for: usbus1 usbus0
              ugen0.3: <ibm>at usbus0
              ugen1.3: <logitech>at usbus1
              ukbd0: <usb keyboard="">on usbus1
              kbd2 at ukbd0
              uhid0: <usb keyboard="">on usbus1
              Trying to mount root from ufs:/dev/da0s1a
              WARNING: / was not properly dismounted
              WARNING: R/W mount of / denied.  Filesystem is not clean - run fsck
              pflog0: promiscuous mode enabled
              em1: link state changed to UP
              em0: link state changed to UP</usb></usb></logitech></ibm></tsstcorp></ibm-esxs></vendor></vendor></vendor></vendor></intel></intel></intel></intel></clock_battery></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></at></power></ata></ata></intel></serial></ata></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel(r)></acpi></acpi></acpi></acpi></intel(r)></acpi></acpi></vga-compatible></pci></pci-pci></acpi></acpi></lsilogic></acpi></acpi></intel></intel></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></ibm></software></version></ibm ></lahf></nx,rdtscp,lm></sse3,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,popcnt></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

              1 Reply Last reply Reply Quote 0
              • W
                wallabybob
                last edited by

                It looks as if the devices on pci bus 31 (igb0 through igb3) are not visible in the pci device tree at startup in the HD boot you have logged. If the devices had been visible but unrecognised by any driver I would have expected the startup to report something like:

                pci31: <network, ethernet="">at device 0.0 (no driver attached)</network,>

                I have no explanation for why the devices might be visible in the PCI device tree on booting from CD but not on from booting from HD.

                Could you provide the output of pfSense shell command # pciconf -l -v after booting from HD?

                Do you see any different behaviour if you

                • move the igb devices to another slot

                • turn off the power, wait at least 20 seconds then boot from HD

                1 Reply Last reply Reply Quote 0
                • R
                  richc
                  last edited by

                  Sorry for the long delay in getting back, I reinstalled with uniprocessor kernel and fixed the kernel  parameter to 4 and it seems to be OK now.

                  How I am just starting testing with LAGGS and trunked VLANs

                  1 Reply Last reply Reply Quote 0
                  • B
                    Brutal
                    last edited by

                    Richc - That's good news.  I didn't intend to hijack your thread, I thought our issues may be similar dealing with the quad cards.

                    Wallybybob  - I pulled the server from our co-lo facility and brought it back to the office.  Upon boot, the HD install saw the card.  Thinking about your last advice about pulling power and how that's in effect what I had just done, I proceeded to do several boots, by pulling power and also by software restarts.

                    Each time the server was booted cold, it saw the card.  Each time the server was soft restarted, it didn't.

                    I went back through the BIOS settings and found a setting for the PCI.  Settings were for Gen1 or Gen2 device.  It was set for Gen1.  I set it for Gen2.  Seems to be working now.  I should have seen that before.

                    I'm going to do some changes to the hyperthreading and SMP install to see what the effects are and I'll post the results.  Thanks again Wally.

                    1 Reply Last reply Reply Quote 0
                    • W
                      wallabybob
                      last edited by

                      @Brutal:

                      I went back through the BIOS settings and found a setting for the PCI.  Settings were for Gen1 or Gen2 device.  It was set for Gen1.  I set it for Gen2.  Seems to be working now.  I should have seen that before.

                      First time I've heard of anything like that: a BIOS switch to hide PCI devices on restart, And so aptly named  :)

                      Well done.

                      1 Reply Last reply Reply Quote 0
                      • B
                        Brutal
                        last edited by

                        After the bios "Gen2" change, it doesn't matter whether hyperthreading is active, or if the SMP kernel is installed, or both.  Works fine.

                        It also doesn't matter whether the hw.igb.num_queues is set for 2 or 4.

                        In case anyone is interested, this is on an IBM x3250 M3 server with a I340-4t quad card.  It is a bit finicky about having power pulled and reapplied.  Tends to lock up internals if you don't wait a bit.  It's also a very long boot process.  This runs the UEFI bios change.

                        I'll be installing a twin for CARP soon.  Just love pf.

                        Thanks again for your assistance.

                        1 Reply Last reply Reply Quote 0
                        • W
                          wallabybob
                          last edited by

                          @Brutal:

                          It also doesn't matter whether the hw.igb.num_queues is set for 2 or 4.

                          I suspect that it will matter if you have "enough" cores or "enough" cards.

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.