DHCP Leases, Interfaces, & ARP Table Tab Vendor MAC Change w/ 5-15 Snap
-
Did anyone else have the MAC addresses change to manufacturer names with the newest snap?
2.0-RC2 (i386) built on Sun May 15 03:21:07 EDT 2011I know the first question is, did I install the "MAC to vendor" package, but I have not installed it. I would not mind having two columns, one with the MAC, and one with the vendor (since I have the widescreen package installed).
EDIT: NOTE: Install NMAP package before edit
-
Hi,
I do not have this, bu I got this line above the lease table:
Warning: file(/usr/local/share/nmap/nmap-mac-prefixes): failed to open stream: No such file or directory in /etc/inc/pfsense-utils.inc on line 2194I have this on two machines with snapshot:
2.0-RC2 (amd64) built on Sun May 15 04:20:20 EDT 2011 -
Yeah, looks like they changed it from:
if ($data['online'] != "online") { echo "{$fspans}[{$data['mac']}](\"services_wol.php?if={$data['if']}&mac={$data['mac']}\" "\"""){$fspane} \n"; } else { echo "{$fspans}{$data['mac']}{$fspane} \n"; }To:
$mac=$data['mac']; $mac_hi = strtoupper($mac[0] . $mac[1] . $mac[3] . $mac[4] . $mac[6] . $mac[7]); if ($data['online'] != "online") { if(isset($mac_man[$mac_hi])){ // Manufacturer for this MAC is defined echo "{$fspans}[{$mac_man[$mac_hi]}](\"services_wol.php?if={$data['if']}&mac=$mac\" "\"""){$fspane} \n"; }else{ echo "{$fspans}[{$data['mac']}](\"services_wol.php?if={$data['if']}&mac={$data['mac']}\" "\"""){$fspane} \n"; } }else{ if(isset($mac_man[$mac_hi])){ // Manufacturer for this MAC is defined echo "{$fspans}{$mac_man[$mac_hi]}{$fspane} \n"; }else{ echo "{$fspans}{$data['mac']}{$fspane} \n"; } } -
Now what I would like to know is how I can display both sets of info. The MAC in one column and the Vendor in another right next to each other. If the vendor isn't in the database, the vendor column would just be blank.
-
GOT IT!! It is now displaying both sets of information correctly. :D
NOTE: Install the nmap package
(I left the beginnings and ends of some of the other code around it so it makes it easier to replace)Edit /usr/local/www/status_dhcp_leases.php
echo "\n"; echo "{$fspans}{$data['ip']}{$fspane} \n"; if ($data['online'] != "online") { echo "{$fspans}[{$data['mac']}](\"services_wol.php?if={$data['if']}&mac={$data['mac']}\" "\"""){$fspane} \n"; } else { echo "{$fspans}{$data['mac']}{$fspane} \n"; } $mac=$data['mac']; $mac_hi = strtoupper($mac[0] . $mac[1] . $mac[3] . $mac[4] . $mac[6] . $mac[7]); if ($data['online'] != "online") { if(isset($mac_man[$mac_hi])){ // Manufacturer for this MAC is defined echo "{$fspans}{$mac_man[$mac_hi]}{$fspane} \n"; }else{ echo " \n"; } }else{ if(isset($mac_man[$mac_hi])){ // Manufacturer for this MAC is defined echo "{$fspans}{$mac_man[$mac_hi]}{$fspane} \n"; }else{ echo " \n"; } } echo "{$fspans}" . htmlentities($data['hostname']) . "{$fspane} \n"; if ($data['type'] != "static") { echo "{$fspans}" . adjust_gmt($data['start']) . "{$fspane} \n"; echo "{$fspans}" . adjust_gmt($data['end']) . "{$fspane} \n"; } else { echo "{$fspans} n/a {$fspane} \n"; echo "{$fspans} n/a {$fspane} \n"; }Now I just have to figure out how/where to edit the MAC database :-\
-
Edit /usr/local/www/status_interfaces.php
echo " | "; $mac=$ifinfo['macaddr']; $mac_hi = strtoupper($mac[0] . $mac[1] . $mac[3] . $mac[4] . $mac[6] . $mac[7]); if(isset($mac_man[$mac_hi])){ print "" . htmlspecialchars($mac_man[$mac_hi]); print ""; } else {print htmlspecialchars($mac);} ?>
-
Edit /usr/local/www/diag_arp.php
| | | | | | echo " | "; $mac=$entry['mac']; $mac_hi = strtoupper($mac[0] . $mac[1] . $mac[3] . $mac[4] . $mac[6] . $mac[7]); if(isset($mac_man[$mac_hi])){ print "{$mac_man[$mac_hi]}"; } else{ print " "; } ?> | echo str_replace("Z_ ", "", $entry['dnsresolve']); ?> | | |
-
nice work! I hope one of the developers can add this to the mainline code.
-
The only problem that arises is that the changes will not fit on the normal screen size. They would have to add it into the widescreen package.
-
You can also change it like so to add a column instead of being in the same column with the little pipe divider.
Edit /usr/local/www/diag_arp.php
| | | | | | | | $mac=$entry['mac']; $mac_hi = strtoupper($mac[0] . $mac[1] . $mac[3] . $mac[4] . $mac[6] . $mac[7]); if(isset($mac_man[$mac_hi])){ print "{$mac_man[$mac_hi]}"; } else{ print " "; } ?> | echo str_replace("Z_ ", "", $entry['dnsresolve']); ?> | | |
-
I added the code and was able to see it fine without the widescreen package, 1024x768. Fits perfectly!
-
I edited the file, copied it to the directory but couldn't see anything.
Should I have to restart the webserver - if yes how could I do that ?
The Layout with mac AND vendor together is very interesting for me! -
do you have the nmap package installed? You need that for it to display the vendor names
-
Hi,
yes I did.
Installed the nmpa package
downloades the diag_arp.php file
edited the file Notepadd++
uploaded it
copied it from /tmp/ to /usr/local/www/it now only shows me the complete vendor name without any mac.
Strange - it should work…I just did copy & paste...
-
Did you replace the section as outlined above? I did leave some of the other lines in there to show where it goes.
Here, to make it easier, I added an attachment of my ARP file.
EDIT: Decided to just upload all three. Just make sure to get rid of the .txt at the end.
diag_arp.php.txt
status_dhcp_leases.php.txt
status_interfaces.php.txt -
I didn't get it work … :(
I deleted /usr/local/www/diag_arp.php and copied there thge new on. I checked it with time and date.
I restarted the webcopnfigurator from the console but with no success.I have iperf, nmap and openvpn export utility installed.
I am using this snapshot:
2.0-RC2 (amd64) built on Sun May 15 04:20:20 EDT 2011 -
I am so stupid…
Your last post did it.Of course I have to edit all three .php files and not only just one....next time I will read the thread a second time ;-)
Thank you very much for your patience!!
Now it looks very well! -
Can't say I haven't done that before to myself. :P
Glad you like it :D
-
I don't like that it replaces the MAC column, often I want/need the MAC and not the vendor, but I also don't want another column.
I prefer the more subtle approach of putting the vendor in a tooltip when you hover over the MAC, or on a second line below the MAC in a smaller font.
Basically either flip the parameters in diag_arp.php:
if(isset($mac_man[$mac_hi])){ print "{$mac}"; }Or replace these two lines:
if(isset($mac_man[$mac_hi])){ print "{$mac_man[$mac_hi]}"; } else{ print $mac; }with
print $mac; if(isset($mac_man[$mac_hi])){ print " _{$mac_man[$mac_hi]}_"; } -
I'll use that on a customer since he has a small screen and we don't have the widescreen installed on his. I think he'll like that change a lot. Thanks JimP!!
As for me personally, I have way too much white space with the widescreen and would like to fill it up with something useful instead of having 4 columns of info and the rest is white space between. Looks bad on the interfaces tab with 2/3 of the screen not being used. Looking into modifying that next.
