DHCP Leases, Interfaces, & ARP Table Tab Vendor MAC Change w/ 5-15 Snap

LostInIgnorance

You can also change it like so to add a column instead of being in the same column with the little pipe divider.

Edit /usr/local/www/diag_arp.php


					  |					  |					  |					  |					  |					  |													
						  |						  |						 
												$mac=$entry['mac']; 
						$mac_hi = strtoupper($mac[0] . $mac[1] . $mac[3] . $mac[4] . $mac[6] . $mac[7]);
						if(isset($mac_man[$mac_hi])){ print "{$mac_man[$mac_hi]}"; }
						else{ print " "; }
						?>
						 | 
														echo str_replace("Z_ ", "", $entry['dnsresolve']);
							?>
						 |						  |												

		 |

ARP.jpg_thumb

Cino

I added the code and was able to see it fine without the widescreen package, 1024x768. Fits perfectly!

Nachtfalke

I edited the file, copied it to the directory but couldn't see anything.

Should I have to restart the webserver - if yes how could I do that ?
The Layout with mac AND vendor together is very interesting for me!

Cino

do you have the nmap package installed? You need that for it to display the vendor names

Nachtfalke

Hi,

yes I did.
Installed the nmpa package
downloades the diag_arp.php file
edited the file Notepadd++
uploaded it
copied it from /tmp/ to /usr/local/www/

it now only shows me the complete vendor name without any mac.

Strange - it should work…I just did copy & paste...

LostInIgnorance

Did you replace the section as outlined above? I did leave some of the other lines in there to show where it goes.

Here, to make it easier, I added an attachment of my ARP file.

EDIT: Decided to just upload all three. Just make sure to get rid of the .txt at the end.

diag_arp.php.txt
status_dhcp_leases.php.txt
status_interfaces.php.txt

Nachtfalke

I didn't get it work … :(

I deleted /usr/local/www/diag_arp.php and copied there thge new on. I checked it with time and date.
I restarted the webcopnfigurator from the console but with no success.

I have iperf, nmap and openvpn export utility installed.
I am using this snapshot:
2.0-RC2 (amd64) built on Sun May 15 04:20:20 EDT 2011

Nachtfalke

I am so stupid…
Your last post did it.

Of course I have to edit all three .php files and not only just one....next time I will read the thread a second time ;-)

Thank you very much for your patience!!
Now it looks very well!

LostInIgnorance

Can't say I haven't done that before to myself. :P

Glad you like it :D

jimp

I don't like that it replaces the MAC column, often I want/need the MAC and not the vendor, but I also don't want another column.

I prefer the more subtle approach of putting the vendor in a tooltip when you hover over the MAC, or on a second line below the MAC in a smaller font.

Basically either flip the parameters in diag_arp.php:

						if(isset($mac_man[$mac_hi])){ print "{$mac}"; }

Or replace these two lines:

						if(isset($mac_man[$mac_hi])){ print "{$mac_man[$mac_hi]}"; }
						else{ print $mac; }

with

						print $mac;
						if(isset($mac_man[$mac_hi])){ print "
_{$mac_man[$mac_hi]}_"; }

LostInIgnorance

I'll use that on a customer since he has a small screen and we don't have the widescreen installed on his. I think he'll like that change a lot. Thanks JimP!!

As for me personally, I have way too much white space with the widescreen and would like to fill it up with something useful instead of having 4 columns of info and the rest is white space between. Looks bad on the interfaces tab with 2/3 of the screen not being used. Looking into modifying that next.

jimp

I just checked in the two-line version:
https://github.com/bsdperimeter/pfsense/commit/701989fbe44f22fc7ea1848ac7c14f361178e5c2

Myself and probably many others rely on having the MAC there to copy and paste as needed, so we don't want to lose that capability just because the nmap package is loaded.

LostInIgnorance

That the whole reason I decided to edit it. I enjoy having all the information in one place. To not only see the mac, but verify it with the company, and the ip. Then I definitely know I have the correct device.

Nachtfalke

If there is a way to use the vencor and mac information without the nmap package I would prefer this way. ;)

Cino

not my call, but I like the tooltip idea. This way the page is clean and i just hover my mouse over to see the vendor info.. I did notice something tho. If a client online, it doesn't show me the vendor info.. i've attach a screenshot for you to see

dhcp.jpg_thumb

LostInIgnorance

~~I think it might work if you post the vendor mac table in the same place. Let me know if this works!

Uninstall nmap. Download attachment and remove the .txt. Un 7zip it. Drop attached file into /usr/local/share/nmap/~~

@jimp:

mkdir -p /usr/local/share/nmap/; fetch -o /usr/local/share/nmap/nmap-mac-prefixes http://nmap.org/svn/nmap-mac-prefixes

NOTE: This is the newest update from nmap for the mac prefex listing. It is not the one included into the nmap package. (had to manually update it)

@Cino - Like 192.168.0.10 :D

jimp

Just fixed the other display as well, should be consistent now for online/offline.

jimp

You could just do this also:

mkdir -p /usr/local/share/nmap/; fetch -o /usr/local/share/nmap/nmap-mac-prefixes http://nmap.org/svn/nmap-mac-prefixes

Nachtfalke

@LostInIgnorance
is working but I could not open your 7z file. Just downloaded mac-prefixes on the homepage.

LostInIgnorance

@Nachtfalke - Deleted 7zip file from post to get rid of confusion and reposted what JimP had put. I couldn't download it either for some odd reason.