Hardware Questions
-
The Hacom images are embedded with VGA output.
http://www.hacom.net/catalog/pub/pfsenseSteve
-
thank you for the link.
Is it possible to install also the packages on the embeded Images?? -
Yes, some packages are supported on NanoBSD but not all since you can't write to the disc continually.
Only those that are supported appear in the GUI.Steve
-
So
I have Pfsense 2 RC3 (NO NANO) now running for more than 4 month on the Futro 210.
The result is that the Transmeta T5800 ist fast enough. I run a OpenVPN Server,IPSEC ( Side to Side) ,PPTP Server, SIP Proxy and about 20 Rules. With my Internet connection ( 13Mbit/1Mbit) i have a cpu load of 20-40%.PFsense is installed on a 4GB Compact Flash Card.
maybe it helps when you are looking for a HomeFirewall.
Christoph
-
I hope you upgraded the RAM because if you don't have enough and you are running the full pfSense install then swap is going to kill your CF card.
Steve
-
at the moment it Runs with 256MB. But i have 100MB free. But I will update to 512MB
-
So I updatet the memory. From the 512MB im using only ~20%
-
Better safe than sorry! ;)
How much swap are you using? It should be reported by the 'top' command or Diagnostics: System Acitivity: in the GUI (same thing).Steve
-
not one %
-
Probably safe then. :)
Steve
