PfBlocker

taryezveb

Great, Thanks :)

firestrife23

I'm seeing double entries for each rules list auto generated by pfblocker under firewall's rules… Is that's normal?

marcelloc

If you checked deny both, then will be two rules with the same list on each interface firewall rules.

Can you check if they are identical?

firestrife23

All of my rules are set to "Deny Inbound"

biogoon

Hi there. I'm running into a problem syncing my two pfSense 2.0.1 systems. The aliases do not appear to be synced when I make a change within pfBlocker. If I add an alias by hand, that syncs fine. Here is the error being reported in the log of the slave system when I try to turn on the TopSpammers rule:

php: : The command '/usr/bin/grep -v '^#' '/var/db/aliastables/pfBlockerTopSpammers.txt.tmp' > '/var/db/aliastables/pfBlockerTopSpammers.txt'' returned exit code '1', the output was ''

Any hints or thoughts?

Thanks!

marcelloc

biogoon,

I'll try to simulate it this weekend.

marcelloc

@firestrife23:

All of my rules are set to "Deny Inbound"

I have no duplicates here, can you send screenshots of your configuration as well system version?

Cino

I think I may have found a small bug with the package… I haven't re-read all 22 pages but did some searching within the topic and couldn't find it.

I'm using squid to improve web performance and for logging.. I have setup a couple of list within pfBlocker to block inbound(WAN) and outbound(LAN) Since squid uses localhost, i figured it would need to be a floating rule for it to catch. After reading a few post, but hunch was right..

After creating the floating rules, they seem to work.. But anytime I make a change within the pfBlocker config pages or just re-save, it deleted the floating rules. I'm thinking this is because pfBlocker deletes and re-creates the Alias's when the configuration its save..

I tried to create a new alias and nest the pfBlockers alias's into it but pfSense didn't like that.. I thought about creating brand new url table alias but then that would be a waste of memory.

any thoughts?

marcelloc

What description did you configured on floating rule?

If it was pfBlockeraliasname something rule, then pfBlocker will remove it.

Try 'pfBlockeraliasname for squid' and see if it survive an apply

Cino

I tried that and it didn't work, but "pfBlocker-aliasname for Squid" does.. The '-' made the difference.. As always, thank you!!

taryezveb

@Cino:

I'm using squid to improve web performance and for logging.. I have setup a couple of list within pfBlocker to block inbound(WAN) and outbound(LAN) Since squid uses localhost, i figured it would need to be a floating rule for it to catch. After reading a few post, but hunch was right..

Can you please explain. Does this mean if one is using Squid and pfBlocker. A floating rule for Squid is need in order for Squid to use the lists used in pfBlocker?

marcelloc

@taryezveb:

Can you please explain. Does this mean if one is using Squid and pfBlocker. A floating rule for Squid is need in order for Squid to use the lists used in pfBlocker?

Yes, read this topic.

http://forum.pfsense.org/index.php/topic,44479.0.html

taryezveb

@marcelloc:

Yes, read this topic.

http://forum.pfsense.org/index.php/topic,44479.0.html

Thanks, just read it but do not fully understand. Maybe once I add the floating rule(s), I will.

marcelloc

pfSense is a statefull firewall, so all rules are applied where connections begin.

Squid does not use LAN or WAN rules but localhost rules as it starts communications to web servers locally.

The only way to apply rules on localhost, is using floating rules.

This way squid wil not be able to connect to any China web site if firewall is blocking access to China's ips.

taryezveb

Thanks for that explanation, I understand it better :) But I'm still not sure how the floating rule(s) show be properly created.

Like this?:

Action: Reject
Interface: WAN
Direction: any
Protocol: any
Source: any
Destination: pfBlockerAliasname
Description: pfBlockerAliasname-Squid

Sorry if these are obvious questions.

marcelloc

Change interface to any and direction to out.

taryezveb

Ok, Thanks a lot for your help! :)

fsavoir

Hi,
I'm new to this list…. But great work on pfSense and all packages.
On my french install system pfBlocker never and any rules to firewall any tips? to track this down?
pfSense 2.0.1 and pfBlock 1.0.1

Thanks.

Fred

marcelloc

You need at least one firewall rule on interface you want to configure pfBlocker.

fsavoir

Hi,

Thanks for your reply… I did have the default rules...... Isn't enough ?
"

RFC 1918 networks * * * * * Block private networks
Reserved/not assigned by IANA * * * * * * Block bogon networks
"

Thanks.

Fred