Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NEW Package: freeRADIUS 2.x

    Scheduled Pinned Locked Moved pfSense Packages
    628 Posts 80 Posters 830.0k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      Nachtfalke
      last edited by

      Hi again,

      to create the USERS file like you posted above you can do the following - I suppose that there are no other entries in the users file:

      • FreeRADIUS => Users => Add a user (+)

      • Set any username and set any password (because this are requiered fields) and the scroll down to "Additional RADIUS Attributes on the TOP of this entry" and paste the following code. Take attention: If you miss whitespaces or something the syntax will be incorrect and radiusd will not start.

      DEFAULT Group == "hotspot", Simultaneous-Use := 4| Fall-Through = 1|DEFAULT Simultaneous-Use := 1| Fall-Through = 1|DEFAULT Framed-Protocol == PPP| Framed-Protocol = PPP,| Framed-Compression = Van-Jacobson-TCP-IP|DEFAULT Hint == "CSLIP"| Framed-Protocol = SLIP,| Framed-Compression = Van-Jacobson-TCP-IP|DEFAULT Hint == "SLIP"| Framed-Protocol = SLIP

      That's it for users file.

      please take attention: in users file "hotspot" is all small letters, your old ldap config has a capital letter at first, your new has two capital letters. don't know if this is case sensitive or not.

      The following is not present in your old config so you should probably set this in the GUI to "no". But test with both/mixed.

      • Compare Check Items

      • Do XLAT

      • Access Attribute Used For Allow

      the last thing is:
      please replace the line 1200 in freeradius.inc like I posted before - the click "save" on FreeRADIUS => LDAP again to write the changes to the ldap file.

      Now we should have your config like it was on your old debian server - hopefully it will work. :-)

      Then we only have to find a way around your "unlang" part and solve this with users file - if possible.

      1 Reply Last reply Reply Quote 0
      • V
        valshare
        last edited by

        Hi Nachtfalke,

        thanx for your support. Can check it tommorow. Now i am at home an can´t check it.

        Gruß, Valle ;-)

        1 Reply Last reply Reply Quote 0
        • N
          Nachtfalke
          last edited by

          Update pkg v1.5.9:

          • Added: The fields "username/password" or "mac address" are no requiered fields anymore. This allows us to make an entry in users/mac file with custom options like "DEFAULT Group == ldap" without username/password. Further this allows us to make en complete empty entry in GUI as a placeholer. Nothing will be put into users/mac file so we are able to put there something else later. Users/mac file has the disadvantage that it will be processed from top to down and a re-arrangement of the entries with drag&drop isn't able from GUI.

          @valshare
          You should update to latest version - this changes were made just for you ;-)
          But now you must not change line 1200 but line 1212 in freeradius.inc  :P

          1 Reply Last reply Reply Quote 0
          • V
            valshare
            last edited by

            Hi Nachtfalke,

            will test it firstly tomorrow and send back feedback as soon as possible.

            Thanx!

            Valle

            1 Reply Last reply Reply Quote 0
            • N
              Nachtfalke
              last edited by

              @valshare:

              Hi Nachtfalke,

              will test it firstly tomorrow and send back feedback as soon as possible.

              Thanx!

              Valle

              I know, I know. Don't stress :D :D

              1 Reply Last reply Reply Quote 0
              • V
                valshare
                last edited by

                Hi Nachtfalke,

                i have testet the new package but withouth success.

                First i found out that the users settings are not needed.

                But there is anything missing in the settings on pfsense but i don´t know whats missing.

                Regards, Valle

                1 Reply Last reply Reply Quote 0
                • V
                  valshare
                  last edited by

                  now it works!!!

                  i have copied my site-avaible/default to the pfsense server and restartet freeradius.

                  the problem is, that the entry

                  
        Auth-Type LDAP {
                ldap
                if (LDAP-Group == "hotspot") {
                        noop
                }
                else {

                        reject

                }
        }

                  is missing in the default file. If have made the change in freeradius.inc on line 1212 and pushed on "save" in the ldap settings and restartet the server.

                  1 Reply Last reply Reply Quote 0
                  • N
                    Nachtfalke
                    last edited by

                    @valshare:

                    (…)
                    is missing in the default file. If have made the change in freeradius.inc on line 1212 and pushed on "save" in the ldap settings and restartet the server.

                    So after you made the changes on line 1212 the above entry is there, correct ?

                    And without the changes on this line 1212 you cannot authenticate a user ?

                    Can you post the complete output of radiusd -X when authenticationg with and without the freeradius.inc changes ?
                    delete passwords. Perhaps we can find another way to work around this entry just from GUI.

                    1 Reply Last reply Reply Quote 0
                    • V
                      valshare
                      last edited by

                      @Nachtfalke:

                      @valshare:

                      (…)
                      is missing in the default file. If have made the change in freeradius.inc on line 1212 and pushed on "save" in the ldap settings and restartet the server.

                      So after you made the changes on line 1212 the above entry is there, correct ?

                      no, there are no changes in the default file.

                      1 Reply Last reply Reply Quote 0
                      • N
                        Nachtfalke
                        last edited by

                        Use the attached file (freeradius.inc), copy it to /usr/local/pkg and then got to
                        FreeRADIUS => LDAP => Save

                        Check before in FreeRADIUS => View config => virtual-server-default

                        PS: Did it work with the "DEFAULT" entries from webGUI in FreeRADIUS => Users ?

                        Thanks

                        freeradius.inc.txt

                        1 Reply Last reply Reply Quote 0
                        • V
                          valshare
                          last edited by

                          Hi,

                          i have copied your file in the right place and set the rights to 755.
                          Go to Services => LDAP => pushed the save button

                          View the config => virtual-server-default

                          but it changed nothing :(

                          checked it with the console:

                          
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(220): cat freeradius.inc | grep hot
        $varmodulesldapenableauthenticate = "Auth-Type LDAP {" . "\n\t\t\tldap" . "\n\t\t\tif (LDAP-Group == " . '"hotspot") {' . "\n\t\t\t\tnoop" . "\n\t\t\t}" . "\n\t\t\telse {" . "\n\t\t\t\treject" . "\n\t\t\t}" . "\n\t\t\t$varmodulesldap2enableauthenticate" . "\n\t}";
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(221): cat /usr/local/etc/raddb/sites-available/default | grep hot
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(222):

                          sorry, but what can i do wrong?

                          1 Reply Last reply Reply Quote 0
                          • N
                            Nachtfalke
                            last edited by

                            @valshare:

                            Hi,

                            i have copied your file in the right place and set the rights to 755.
                            Go to Services => LDAP => pushed the save button

                            View the config => virtual-server-default

                            but it changed nothing :(

                            checked it with the console:

                            
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(220): cat freeradius.inc | grep hot
        $varmodulesldapenableauthenticate = "Auth-Type LDAP {" . "\n\t\t\tldap" . "\n\t\t\tif (LDAP-Group == " . '"hotspot") {' . "\n\t\t\t\tnoop" . "\n\t\t\t}" . "\n\t\t\telse {" . "\n\t\t\t\treject" . "\n\t\t\t}" . "\n\t\t\t$varmodulesldap2enableauthenticate" . "\n\t}";
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(221): cat /usr/local/etc/raddb/sites-available/default | grep hot
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(222):

                            sorry, but what can i do wrong?

                            did you rename it from freeradius.inc.txt to freeradius.inc ?
                            For me it is working.

                            Auth-Type LDAP {
			ldap
			if (LDAP-Group == "hotspot") {
				noop
			}
			else {
				reject
			}
			#ldap2
	}
                            1 Reply Last reply Reply Quote 0
                            • V
                              valshare
                              last edited by

                              yes, i have rename the freeradius.inc.txt file to freeradius.inc as you can see in the code.
                              grep found the change you have made. I will try it again later.

                              strange  ??? But big thnx for your support.

                              1 Reply Last reply Reply Quote 0
                              • E
                                etudiant_22
                                last edited by

                                Bonjour,

                                je fais pars de mon problème dans ce forum en espérant que quelqu'un puisse m'aider.

                                J'ai donc installé et configuré pfsense et plus précisément le portail captif pour que lorsque que des clients wifi de mon réseau veulent se conecter, il leur faut insérer leur login et mot de passe.

                                Avec les compte sur la base local tout marche bien.

                                Maintenant je voudrai mettre en place freeradius (le package de pfsense), et c'est la que je bloque.

                                • Je créer un utilisateur dans la base local de radius pour tester.
                                • J'active l'authentification radius dans le service portail captif et la quand j
                                • Je lance mon navigateur web
                                • je rentre le login et mot de passe  et la j'ai ce message :

                                No valid RADIUS responses received

                                Merci d'avance

                                1 Reply Last reply Reply Quote 0
                                • marcellocM
                                  marcelloc
                                  last edited by

                                  etudiant_22,

                                  I know you love your mother language but please translate your question to english or post it on french forum.

                                  Cordialement,

                                  Marcello Coutinho

                                  Treinamentos de Elite: http://sys-squad.com

                                  Help a community developer! ;D

                                  1 Reply Last reply Reply Quote 0
                                  • N
                                    Nachtfalke
                                    last edited by

                                    @etudiant_22:

                                    Bonjour,

                                    je fais pars de mon problème dans ce forum en espérant que quelqu'un puisse m'aider.

                                    J'ai donc installé et configuré pfsense et plus précisément le portail captif pour que lorsque que des clients wifi de mon réseau veulent se conecter, il leur faut insérer leur login et mot de passe.

                                    Avec les compte sur la base local tout marche bien.

                                    Maintenant je voudrai mettre en place freeradius (le package de pfsense), et c'est la que je bloque.

                                    • Je créer un utilisateur dans la base local de radius pour tester.
                                    • J'active l'authentification radius dans le service portail captif et la quand j
                                    • Je lance mon navigateur web
                                    • je rentre le login et mot de passe  et la j'ai ce message :

                                    No valid RADIUS responses received

                                    Merci d'avance

                                    That's google translated - cool ;o)

                                    "salut
                                    jetez un oeil à la documentation du paquet
                                    http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package"

                                    1 Reply Last reply Reply Quote 0
                                    • N
                                      Nachtfalke
                                      last edited by

                                      Updates pkg v1.6.0:

                                      • Added: Ability to set individual redirection URL after login per user/mac

                                      Known bugs:

                                      • When using "stop/start accounting on CP then "Amount of Time" isn't working correctly.
                                        http://redmine.pfsense.org/issues/2164

                                      • When using CP + RADIUS + Vouchers and "reauthenticate every minute" is enabled then CP sends the voucher as username to RADIUS. This causes RADIUS to disconnect the "user/voucher" because of an unknown/wrong "username".
                                        http://redmine.pfsense.org/issues/2155

                                      • When stop/start accounting on CP is enabled than the syslog shows many "wrong order" or "Login found bot no logout detected". This seems to not affect the usage of RADIUS but it is not 100% correct.
                                        http://redmine.pfsense.org/issues/2143

                                      1 Reply Last reply Reply Quote 0
                                      • N
                                        Nachtfalke
                                        last edited by

                                        Updates pkg v1.6.1:

                                        • Added: custom logging options for syslog output. We can now see the remaining time, download volume, max bandwidth

                                        • Updated: freeradius 2.x package documentation

                                        Known bugs:

                                        • When using "stop/start accounting on CP then "Amount of Time" isn't working correctly.
                                          http://redmine.pfsense.org/issues/2164

                                        • When using CP + RADIUS + Vouchers and "reauthenticate every minute" is enabled then CP sends the voucher as username to RADIUS. This causes RADIUS to disconnect the "user/voucher" because of an unknown/wrong "username".
                                          http://redmine.pfsense.org/issues/2155

                                        • When stop/start accounting on CP is enabled than the syslog shows many "wrong order" or "Login found bot no logout detected". This seems to not affect the usage of RADIUS but it is not 100% correct.
                                          http://redmine.pfsense.org/issues/2143

                                        1 Reply Last reply Reply Quote 0
                                        • F
                                          filip_pag
                                          last edited by

                                          Hello,

                                          i have freeradius2 and client name "ted", he has god IP address 172.16.3.1 in freeradius, and in DHCP server he has got static IP binded to his MAC address of device A. I want to enable "ted" to connect with his device B. Do I have to create another account in freeradius or: in DHCP server i bind his device B MAC address to another IP address(172.16.3.2) and add 172.16.3.2 to "ted" IP range?

                                          1 Reply Last reply Reply Quote 0
                                          • N
                                            Nachtfalke
                                            last edited by

                                            @filip_pag:

                                            Hello,

                                            i have freeradius2 and client name "ted", he has god IP address 172.16.3.1 in freeradius, and in DHCP server he has got static IP binded to his MAC address of device A. I want to enable "ted" to connect with his device B. Do I have to create another account in freeradius or: in DHCP server i bind his device B MAC address to another IP address(172.16.3.2) and add 172.16.3.2 to "ted" IP range?

                                            Hi,

                                            this post is a little bit confusing - for me.

                                            You need just one entry with "ted" in FreeRADIUS => Users.
                                            If you want FreeRADIUS to assign an client an IP address then the NAS must support that. pfsense (NAS) does not support that - as far as I know.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.