NEW Package: freeRADIUS 2.x

Nachtfalke

@valshare:

Hi Nachtfalke,

will test it firstly tomorrow and send back feedback as soon as possible.

Thanx!

Valle

I know, I know. Don't stress :D :D

valshare

Hi Nachtfalke,

i have testet the new package but withouth success.

First i found out that the users settings are not needed.

But there is anything missing in the settings on pfsense but i don´t know whats missing.

Regards, Valle

valshare

now it works!!!

i have copied my site-avaible/default to the pfsense server and restartet freeradius.

the problem is, that the entry


        Auth-Type LDAP {
                ldap
                if (LDAP-Group == "hotspot") {
                        noop
                }
                else {

                        reject

                }
        }

is missing in the default file. If have made the change in freeradius.inc on line 1212 and pushed on "save" in the ldap settings and restartet the server.

Nachtfalke

@valshare:

(…)
is missing in the default file. If have made the change in freeradius.inc on line 1212 and pushed on "save" in the ldap settings and restartet the server.

So after you made the changes on line 1212 the above entry is there, correct ?

And without the changes on this line 1212 you cannot authenticate a user ?

Can you post the complete output of radiusd -X when authenticationg with and without the freeradius.inc changes ?
delete passwords. Perhaps we can find another way to work around this entry just from GUI.

valshare

@Nachtfalke:

@valshare:

(…)
is missing in the default file. If have made the change in freeradius.inc on line 1212 and pushed on "save" in the ldap settings and restartet the server.

So after you made the changes on line 1212 the above entry is there, correct ?

no, there are no changes in the default file.

Nachtfalke

Use the attached file (freeradius.inc), copy it to /usr/local/pkg and then got to
FreeRADIUS => LDAP => Save

Check before in FreeRADIUS => View config => virtual-server-default

PS: Did it work with the "DEFAULT" entries from webGUI in FreeRADIUS => Users ?

Thanks

freeradius.inc.txt

valshare

Hi,

i have copied your file in the right place and set the rights to 755.
Go to Services => LDAP => pushed the save button

View the config => virtual-server-default

but it changed nothing :(

checked it with the console:


[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(220): cat freeradius.inc | grep hot
        $varmodulesldapenableauthenticate = "Auth-Type LDAP {" . "\n\t\t\tldap" . "\n\t\t\tif (LDAP-Group == " . '"hotspot") {' . "\n\t\t\t\tnoop" . "\n\t\t\t}" . "\n\t\t\telse {" . "\n\t\t\t\treject" . "\n\t\t\t}" . "\n\t\t\t$varmodulesldap2enableauthenticate" . "\n\t}";
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(221): cat /usr/local/etc/raddb/sites-available/default | grep hot
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(222):

sorry, but what can i do wrong?

Nachtfalke

@valshare:

Hi,

i have copied your file in the right place and set the rights to 755.
Go to Services => LDAP => pushed the save button

View the config => virtual-server-default

but it changed nothing :(

checked it with the console:
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(220): cat freeradius.inc | grep hot
        $varmodulesldapenableauthenticate = "Auth-Type LDAP {" . "\n\t\t\tldap" . "\n\t\t\tif (LDAP-Group == " . '"hotspot") {' . "\n\t\t\t\tnoop" . "\n\t\t\t}" . "\n\t\t\telse {" . "\n\t\t\t\treject" . "\n\t\t\t}" . "\n\t\t\t$varmodulesldap2enableauthenticate" . "\n\t}";
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(221): cat /usr/local/etc/raddb/sites-available/default | grep hot
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(222):
sorry, but what can i do wrong?

did you rename it from freeradius.inc.txt to freeradius.inc ?
For me it is working.

Auth-Type LDAP {
			ldap
			if (LDAP-Group == "hotspot") {
				noop
			}
			else {
				reject
			}
			#ldap2
	}

valshare

yes, i have rename the freeradius.inc.txt file to freeradius.inc as you can see in the code.
grep found the change you have made. I will try it again later.

strange ??? But big thnx for your support.

etudiant_22

Bonjour,

je fais pars de mon problème dans ce forum en espérant que quelqu'un puisse m'aider.

J'ai donc installé et configuré pfsense et plus précisément le portail captif pour que lorsque que des clients wifi de mon réseau veulent se conecter, il leur faut insérer leur login et mot de passe.

Avec les compte sur la base local tout marche bien.

Maintenant je voudrai mettre en place freeradius (le package de pfsense), et c'est la que je bloque.

Je créer un utilisateur dans la base local de radius pour tester.
J'active l'authentification radius dans le service portail captif et la quand j
Je lance mon navigateur web
je rentre le login et mot de passe et la j'ai ce message :

No valid RADIUS responses received

Merci d'avance

marcelloc

etudiant_22,

I know you love your mother language but please translate your question to english or post it on french forum.

Cordialement,

Marcello Coutinho

Nachtfalke

@etudiant_22:

Bonjour,

je fais pars de mon problème dans ce forum en espérant que quelqu'un puisse m'aider.

J'ai donc installé et configuré pfsense et plus précisément le portail captif pour que lorsque que des clients wifi de mon réseau veulent se conecter, il leur faut insérer leur login et mot de passe.

Avec les compte sur la base local tout marche bien.

Maintenant je voudrai mettre en place freeradius (le package de pfsense), et c'est la que je bloque.

Je créer un utilisateur dans la base local de radius pour tester.

J'active l'authentification radius dans le service portail captif et la quand j

Je lance mon navigateur web

je rentre le login et mot de passe et la j'ai ce message :

No valid RADIUS responses received

Merci d'avance

That's google translated - cool ;o)

"salut
jetez un oeil à la documentation du paquet
http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package"

Nachtfalke

Updates pkg v1.6.0:

Added: Ability to set individual redirection URL after login per user/mac

Known bugs:

When using "stop/start accounting on CP then "Amount of Time" isn't working correctly.
http://redmine.pfsense.org/issues/2164
When using CP + RADIUS + Vouchers and "reauthenticate every minute" is enabled then CP sends the voucher as username to RADIUS. This causes RADIUS to disconnect the "user/voucher" because of an unknown/wrong "username".
http://redmine.pfsense.org/issues/2155
When stop/start accounting on CP is enabled than the syslog shows many "wrong order" or "Login found bot no logout detected". This seems to not affect the usage of RADIUS but it is not 100% correct.
http://redmine.pfsense.org/issues/2143

Nachtfalke

Updates pkg v1.6.1:

Added: custom logging options for syslog output. We can now see the remaining time, download volume, max bandwidth
Updated: freeradius 2.x package documentation

Known bugs:

When using "stop/start accounting on CP then "Amount of Time" isn't working correctly.
http://redmine.pfsense.org/issues/2164
When using CP + RADIUS + Vouchers and "reauthenticate every minute" is enabled then CP sends the voucher as username to RADIUS. This causes RADIUS to disconnect the "user/voucher" because of an unknown/wrong "username".
http://redmine.pfsense.org/issues/2155
When stop/start accounting on CP is enabled than the syslog shows many "wrong order" or "Login found bot no logout detected". This seems to not affect the usage of RADIUS but it is not 100% correct.
http://redmine.pfsense.org/issues/2143

filip_pag

Hello,

i have freeradius2 and client name "ted", he has god IP address 172.16.3.1 in freeradius, and in DHCP server he has got static IP binded to his MAC address of device A. I want to enable "ted" to connect with his device B. Do I have to create another account in freeradius or: in DHCP server i bind his device B MAC address to another IP address(172.16.3.2) and add 172.16.3.2 to "ted" IP range?

Nachtfalke

@filip_pag:

Hello,

i have freeradius2 and client name "ted", he has god IP address 172.16.3.1 in freeradius, and in DHCP server he has got static IP binded to his MAC address of device A. I want to enable "ted" to connect with his device B. Do I have to create another account in freeradius or: in DHCP server i bind his device B MAC address to another IP address(172.16.3.2) and add 172.16.3.2 to "ted" IP range?

Hi,

this post is a little bit confusing - for me.

You need just one entry with "ted" in FreeRADIUS => Users.
If you want FreeRADIUS to assign an client an IP address then the NAS must support that. pfsense (NAS) does not support that - as far as I know.

filip_pag

i want to do this
http://imageshack.us/photo/my-images/831/freeradius.png/
that ted can connect only by his iPhone and iPod

Nachtfalke

@filip_pag:

i want to do this
http://imageshack.us/photo/my-images/831/freeradius.png/
that ted can connect only by his iPhone and iPod

HI,

create a user on freeradius with username "ted" or whatever you like and a password for this user.

Forget about "Framed-IP-Address" on FreeRADIUS GUI. pfSense DHCP server does not understand this if FreeRADIUS sends "Framed-IP-Address".
Just add two static mappings on DHCP for the iphone MAC and another one for the iPad MAC. The one with 172.16.3.1 and the other with 172.16.3.2
The IP address is independent from the configuration you do on FreeRADIUS.

What freeradius is doing in your screenshot is only the following:
iPad connects to wifi
wifi demands a username/password from iPad user
iPad user enters "ted" and the password
wifi checks this username/password against FreeRADIUS
FreeRADIUS sends an "Access-Accept" if credentials are correct or "Access-Reject" if credentials are wrong

Then the iPad has access to the network and the DHCP server offers the IP address to iPad.

filip_pag

understand but,

I create static IP 172.16.3.1 binded to MAC,
and i added framed IP 172.16.3.1 to teds account.

from another PC, static IP 172.16.3.6 that has binded its MAC
I tried to connect with teds account and freeradius disconects me,
think that it works, can I add 2 framed IP-s to one freeradius user account?

Nachtfalke

@filip_pag:

understand but,

I create static IP 172.16.3.1 binded to MAC,
and i added framed IP 172.16.3.1 to teds account.

from another PC, static IP 172.16.3.6 that has binded its MAC
I tried to connect with teds account and freeradius disconects me,
think that it works, can I add 2 framed IP-s to one freeradius user account?

The disconnection is probably not because of the IP address but because of "Simultaneous-Use" settings. Leave this field empty or set it to 2 or higher.

Further post the syslog output.

I don't think that a user can have two IPs….Try with "172.17.3.1+" which gives the next IP to a user which is free if 172.16.3.1 is in use.