NEW Package: freeRADIUS 2.x

Nachtfalke

Hi,

i have copied your file in the right place and set the rights to 755.
Go to Services => LDAP => pushed the save button

View the config => virtual-server-default

but it changed nothing :(

checked it with the console:
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(220): cat freeradius.inc | grep hot
        $varmodulesldapenableauthenticate = "Auth-Type LDAP {" . "\n\t\t\tldap" . "\n\t\t\tif (LDAP-Group == " . '"hotspot") {' . "\n\t\t\t\tnoop" . "\n\t\t\t}" . "\n\t\t\telse {" . "\n\t\t\t\treject" . "\n\t\t\t}" . "\n\t\t\t$varmodulesldap2enableauthenticate" . "\n\t}";
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(221): cat /usr/local/etc/raddb/sites-available/default | grep hot
[2.0.1-RELEASE][root@pfsense.xxx.local]/usr/local/pkg(222):
sorry, but what can i do wrong?

did you rename it from freeradius.inc.txt to freeradius.inc ?
For me it is working.

Auth-Type LDAP {
			ldap
			if (LDAP-Group == "hotspot") {
				noop
			}
			else {
				reject
			}
			#ldap2
	}

valshare

yes, i have rename the freeradius.inc.txt file to freeradius.inc as you can see in the code.
grep found the change you have made. I will try it again later.

strange ??? But big thnx for your support.

etudiant_22

Bonjour,

je fais pars de mon problème dans ce forum en espérant que quelqu'un puisse m'aider.

J'ai donc installé et configuré pfsense et plus précisément le portail captif pour que lorsque que des clients wifi de mon réseau veulent se conecter, il leur faut insérer leur login et mot de passe.

Avec les compte sur la base local tout marche bien.

Maintenant je voudrai mettre en place freeradius (le package de pfsense), et c'est la que je bloque.

Je créer un utilisateur dans la base local de radius pour tester.
J'active l'authentification radius dans le service portail captif et la quand j
Je lance mon navigateur web
je rentre le login et mot de passe et la j'ai ce message :

No valid RADIUS responses received

Merci d'avance

marcelloc

etudiant_22,

I know you love your mother language but please translate your question to english or post it on french forum.

Cordialement,

Marcello Coutinho

Nachtfalke

@etudiant_22:

Bonjour,

je fais pars de mon problème dans ce forum en espérant que quelqu'un puisse m'aider.

J'ai donc installé et configuré pfsense et plus précisément le portail captif pour que lorsque que des clients wifi de mon réseau veulent se conecter, il leur faut insérer leur login et mot de passe.

Avec les compte sur la base local tout marche bien.

Maintenant je voudrai mettre en place freeradius (le package de pfsense), et c'est la que je bloque.

Je créer un utilisateur dans la base local de radius pour tester.

J'active l'authentification radius dans le service portail captif et la quand j

Je lance mon navigateur web

je rentre le login et mot de passe et la j'ai ce message :

No valid RADIUS responses received

Merci d'avance

That's google translated - cool ;o)

"salut
jetez un oeil à la documentation du paquet
http://doc.pfsense.org/index.php/FreeRADIUS_2.x_package"

Nachtfalke

Updates pkg v1.6.0:

Added: Ability to set individual redirection URL after login per user/mac

Known bugs:

When using "stop/start accounting on CP then "Amount of Time" isn't working correctly.
http://redmine.pfsense.org/issues/2164
When using CP + RADIUS + Vouchers and "reauthenticate every minute" is enabled then CP sends the voucher as username to RADIUS. This causes RADIUS to disconnect the "user/voucher" because of an unknown/wrong "username".
http://redmine.pfsense.org/issues/2155
When stop/start accounting on CP is enabled than the syslog shows many "wrong order" or "Login found bot no logout detected". This seems to not affect the usage of RADIUS but it is not 100% correct.
http://redmine.pfsense.org/issues/2143

Nachtfalke

Updates pkg v1.6.1:

Added: custom logging options for syslog output. We can now see the remaining time, download volume, max bandwidth
Updated: freeradius 2.x package documentation

Known bugs:

When using "stop/start accounting on CP then "Amount of Time" isn't working correctly.
http://redmine.pfsense.org/issues/2164
When using CP + RADIUS + Vouchers and "reauthenticate every minute" is enabled then CP sends the voucher as username to RADIUS. This causes RADIUS to disconnect the "user/voucher" because of an unknown/wrong "username".
http://redmine.pfsense.org/issues/2155
When stop/start accounting on CP is enabled than the syslog shows many "wrong order" or "Login found bot no logout detected". This seems to not affect the usage of RADIUS but it is not 100% correct.
http://redmine.pfsense.org/issues/2143

filip_pag

Hello,

i have freeradius2 and client name "ted", he has god IP address 172.16.3.1 in freeradius, and in DHCP server he has got static IP binded to his MAC address of device A. I want to enable "ted" to connect with his device B. Do I have to create another account in freeradius or: in DHCP server i bind his device B MAC address to another IP address(172.16.3.2) and add 172.16.3.2 to "ted" IP range?

Nachtfalke

@filip_pag:

Hello,

i have freeradius2 and client name "ted", he has god IP address 172.16.3.1 in freeradius, and in DHCP server he has got static IP binded to his MAC address of device A. I want to enable "ted" to connect with his device B. Do I have to create another account in freeradius or: in DHCP server i bind his device B MAC address to another IP address(172.16.3.2) and add 172.16.3.2 to "ted" IP range?

Hi,

this post is a little bit confusing - for me.

You need just one entry with "ted" in FreeRADIUS => Users.
If you want FreeRADIUS to assign an client an IP address then the NAS must support that. pfsense (NAS) does not support that - as far as I know.

filip_pag

i want to do this
http://imageshack.us/photo/my-images/831/freeradius.png/
that ted can connect only by his iPhone and iPod

Nachtfalke

@filip_pag:

i want to do this
http://imageshack.us/photo/my-images/831/freeradius.png/
that ted can connect only by his iPhone and iPod

HI,

create a user on freeradius with username "ted" or whatever you like and a password for this user.

Forget about "Framed-IP-Address" on FreeRADIUS GUI. pfSense DHCP server does not understand this if FreeRADIUS sends "Framed-IP-Address".
Just add two static mappings on DHCP for the iphone MAC and another one for the iPad MAC. The one with 172.16.3.1 and the other with 172.16.3.2
The IP address is independent from the configuration you do on FreeRADIUS.

What freeradius is doing in your screenshot is only the following:
iPad connects to wifi
wifi demands a username/password from iPad user
iPad user enters "ted" and the password
wifi checks this username/password against FreeRADIUS
FreeRADIUS sends an "Access-Accept" if credentials are correct or "Access-Reject" if credentials are wrong

Then the iPad has access to the network and the DHCP server offers the IP address to iPad.

filip_pag

understand but,

I create static IP 172.16.3.1 binded to MAC,
and i added framed IP 172.16.3.1 to teds account.

from another PC, static IP 172.16.3.6 that has binded its MAC
I tried to connect with teds account and freeradius disconects me,
think that it works, can I add 2 framed IP-s to one freeradius user account?

Nachtfalke

@filip_pag:

understand but,

I create static IP 172.16.3.1 binded to MAC,
and i added framed IP 172.16.3.1 to teds account.

from another PC, static IP 172.16.3.6 that has binded its MAC
I tried to connect with teds account and freeradius disconects me,
think that it works, can I add 2 framed IP-s to one freeradius user account?

The disconnection is probably not because of the IP address but because of "Simultaneous-Use" settings. Leave this field empty or set it to 2 or higher.

Further post the syslog output.

I don't think that a user can have two IPs….Try with "172.17.3.1+" which gives the next IP to a user which is free if 172.16.3.1 is in use.

Cino

Nachtfalke

I meant to report this a while ago, but your probably already know this. Everytime I reboot my box, i see these errors on the console,see attachment. Its not hurting anything from what I can tell.

Stephen

freeradius2.jpg_thumb

Nachtfalke

@Cino:

Nachtfalke

I meant to report this a while ago, but your probably already know this. Everytime I reboot my box, i see these errors on the console,see attachment. Its not hurting anything from what I can tell.

Stephen

Hi,

do you have "Plain MAC Auth" enabled or disabled ?
Do you have these two files after the "errors" when you boot up pfsense ?


/usr/local/etc/raddb/files.backup
/usr/local/etc/raddb/policy.conf.backup

–--- edit -----
@cino:
I couldn't find any post from you on the last 5 pages - and if there was one - I missed it ;-)

Ich checked here at home with "Plain MAC Auth" enabled and disabled and rebooted - no problems.
In general - after package installation - freeradius2 creates a backup of the following files:


/usr/local/etc/raddb/modules/files
to
/usr/local/etc/raddb/files.backup
and
/usr/local/etc/raddb/policy.conf
to
/usr/local/etc/raddb/policy.conf.backup

Because when enabling Plain MAC Auth these files will be overwritten and to make sure we can get back the original one I made the backups after package installation.

Perhaps try with a reinstallation on freeradius2 package and then the files should be there. If not it is not a problem but post back - then I will have a closer look at this.

Thanks for feedback :-)

Nachtfalke

@Nachtfalke:

Updates pkg v1.6.2:

Added: Support for one-time-paasswords. Implemented an open source solution which can be used from many mobile devices (iPhone, Android, BlackBerry, …)

Updated: freeradius 2.x package documentation

Known bugs:

When using "stop/start accounting on CP then "Amount of Time" isn't working correctly.
http://redmine.pfsense.org/issues/2164

When using CP + RADIUS + Vouchers and "reauthenticate every minute" is enabled then CP sends the voucher as username to RADIUS. This causes RADIUS to disconnect the "user/voucher" because of an unknown/wrong "username".
http://redmine.pfsense.org/issues/2155

When stop/start accounting on CP is enabled than the syslog shows many "wrong order" or "Login found bot no logout detected". This seems to not affect the usage of RADIUS but it is not 100% correct.
http://redmine.pfsense.org/issues/2143

Cino

I dont have "Plain MAC Auth" enabled and dont have the 2 files either. I think I know what could be the issue. I'm running 2.1-Dev on my box which is looking for pbi packages. When I reinstall the package or reinstall just the GUI components, I have to manually installing the binary via from shell. I'm wondering because I'm running the pkg install, it removes these files.

btw, great work on the package!

Nachtfalke

This could be the problem.

So if you like to "eliminate" this error message then just create a backup of these two files by hand. If not - there won't be a problem, too.
The backup is only to prevent unknown site-effects which probably aren't there.

PS: How could you run freeradius2 on 2.1 ? Isn't it based on FreeBSD 9 until now ?

Cino

the binaries are not FreeBSD9.x yet.. i'm gitsync the pfsense code so I can have IPv6 function. Can't wait for FreeBSD9 snapshots but I have a feeling a lot of the packages i'm using wont be able to install :-(

marcelloc

@Cino:

Can't wait for FreeBSD9 snapshots but I have a feeling a lot of the packages i'm using wont be able to install :-(

good feeling :D

I`ll need to learn how to build pbi packages for pfsense.