Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Installing on a Firebox X700

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    108 Posts 7 Posters 45.5k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S Offline
      stephenw10 Netgate Administrator
      last edited by

      Well one of two things is happening here, assuming the firebox is working correctly:

      1. The image is not writing to the card correctly.

      2. Your serial cable setup is not working.

      If the image doesn't write properly then physdiskwrite will show errors. Possibly the image was corrupted during download. Did you check the md5?
      Have you proved your serial cable setup with something else? What do you mean by 'keyspan'?

      Steve

      1 Reply Last reply Reply Quote 0
      • G Offline
        GOBIGRED
        last edited by

        So i dont know what going on

        1 Reply Last reply Reply Quote 0
        • stephenw10S Offline
          stephenw10 Netgate Administrator
          last edited by

          I'm sure we can get this working, many other users have.  :)
          However in order to troubleshoot the problem you need to answer my questions as best you can.
          If I'm asking you something you don't understand then please ask me to clarify it.

          Did you check the MD5 sum of the downloaded image file against the one provided?

          Have you tested your serial cable setup successfully with any OS?

          Steve

          1 Reply Last reply Reply Quote 0
          • G Offline
            GOBIGRED
            last edited by

            A keyspan is just a serial to usb adapter. And yes i i can use the same serial cable on a cisco device

            1 Reply Last reply Reply Quote 0
            • stephenw10S Offline
              stephenw10 Netgate Administrator
              last edited by

              Ah OK,
              Next thing then is to check that your serial connection on the firebox is working.
              Boot the firebox either to m0n0wall (if you are sure that is working) or with the original Watchguard OS. Both should provide output on the serial port, m0n0wall at 9600 and the Watchguard OS at 115200.
              If you can see some output from either of those then the pfSense card is not booting for some reason.

              Steve

              1 Reply Last reply Reply Quote 0
              • G Offline
                GOBIGRED
                last edited by

                Looks like i dont have a copy of the WG os (moran me thought i did on the file server) is there anyway to get a couple? But m0nowall works. So there has to be something im doing wrong? Im new to this im use to using cisco firewall so trying out something new as a side project and would like to get it up LOL.

                1 Reply Last reply Reply Quote 0
                • stephenw10S Offline
                  stephenw10 Netgate Administrator
                  last edited by

                  So when you boot m0n0wall you can see output on the serial console?

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • G Offline
                    GOBIGRED
                    last edited by

                    Yes i can se a output with monowall!!

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S Offline
                      stephenw10 Netgate Administrator
                      last edited by

                      Ok, so the serial connection is proven working.
                      In that case the box is not booting the CF card for some reason.
                      1. The image is not being correctly written to the card.
                      2. The card is somehow incompatible with the box.

                      To confirm the card is compatible you can try writing the m0n0wall image to it.

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • G Offline
                        GOBIGRED
                        last edited by

                        What kind of card do you need to use?

                        1 Reply Last reply Reply Quote 0
                        • G Offline
                          GOBIGRED
                          last edited by

                          I can hold down the down arrow on the FB and i get a menu it says boot failed? Any idea why im getting that?

                          1 Reply Last reply Reply Quote 0
                          • G Offline
                            GOBIGRED
                            last edited by

                            steve,
                            You seem to be the only one trying to help me do you have pfsense running on a firebox? This is bugging the heck out of me, how monowall works and not pfsense!!!! :'(

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S Offline
                              stephenw10 Netgate Administrator
                              last edited by

                              I was suggesting you flash m0n0wall on to one of your 4GB Sandisk cards. Since you have been able to get m0n0wall running, with serial output, it should verify the compatibility of the card with the Watchguard hardware. I can't see why it wouldn't work but you never know!

                              What card are you using for m0n0wall?

                              I have an X700 here running pfSense. I have booted it from a Sony 2GB 300X card and a Transend 4GB 133X card.

                              The bios in the X-Core includes funtions not in a normal desktop bios. It can write to the LCD for example. Watchguard provided enough functionality in the bios to rewrite their software using only the serial port if it became corrupt. We can't use that though. That's what you are seeing on the lcd.

                              My own box here was damaged in shipping, it was bent in half!, I managed to resurrect it but it is tempromental at best. Sometimes it powers up to the arm/disarm led flashing green in which case it won't boot. That LED should be red.

                              Did you ever check the MD5 sum of your downloaded image? Or just try downloading it again?
                              I haven't seen it for a while but old versions of Internet Explorer used to be notorious for corrupting compressed image formats.

                              Steve

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • G Offline
                                GOBIGRED
                                last edited by

                                yea i checked the MD5 file after downloading everything looks great. So are you just theres no way to get pfsense on my box? i would really like to have it but if it dosnt work then i cant witch i see weird because according to the fourm there is a lot of people that have got it to work!! IS there a special compact flash card i need to use?what file did you use to to get pfsense working on your box?  Anyway to get the orignal os for the firebox?

                                Thanks

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S Offline
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  No there's no special card. Like I said both I tried worked fine.
                                  It is possible that the Sandisk CF cards you are trying to use are incompatible.

                                  Have you tried m0n0wall on one of the Sandisk 4GB cards?

                                  Are you seeing the red arm LED?

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • G Offline
                                    GOBIGRED
                                    last edited by

                                    yes i seethe red led light it beeps ones when booting up dont know if that tells much. the board has a green light on it as well

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S Offline
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Those things are all good signs. The beep happens after the memory test as it tries to boot an OS.

                                      What size card is m0n0wall booting from?

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • G Offline
                                        GOBIGRED
                                        last edited by

                                        Its booting from the 4g scandisk!! i went out and got another CF aits a lexar 4 g 200x works with m0nowall not with pfsense

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S Offline
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Hmm, well that's very odd.
                                          Are you using the 4GB image?

                                          Try using a 1GB image instead. It's possible the image doesn't fit on the card.
                                          E.g. http://files.chi.pfsense.org/mirror/downloads/pfSense-2.0.1-RELEASE-1g-i386-nanobsd.img.gz

                                          Steve

                                          1 Reply Last reply Reply Quote 0
                                          • G Offline
                                            GOBIGRED
                                            last edited by

                                            ok tryed that image, when i turn it on the 0-5 blinks green power is orange and arm/ disarm is red it beep the lcd is lite up after it beeps the lcd goes black a few moments later lcd lights up i open putty speed 9600 data bits 8 stop bits 1 parity none flow control xdn.xoff and still nothing anyway you could send me the image your using since it works?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.