Installing on a Firebox X700
-
So i got the file to write to CF using xp, but in putty nothing shows up is the serial port noth working?
-
The serial port should work without any further action. You have to have putty set to 9600 8 N 1.
If you boot the Watchguard CF card the serial port runs at 115200 instead.
Or do you mean after the initial setup?
Steve
-
So i got the file to transfer to CF, Then i go and try to connect using putty, hyperterminal and dont see anything on the the screen, the lcd light is on but showing nothing and the power light is orange and the arm button is red! Dont know what else to do any help would be great.
Thanks
-
Do you know this box is fully functional?
Does it boot the Watchguard CF card successfully?
Can you see the Watchguard OS boot sequence at 115200?Steve
-
yes the box works, i had M0no0wall on it and wanted to try something new!
-
ive tried connecting with a 9 pin male cable to the port on my computer with a male 9 min and a keyspan to the db9 cable and get nothing, is theere a special cable firebox wants you to use?
-
No it's a standard serial port with a standard null modem cable.
Did the serial port work with m0n0wall? Have you changed any other part of the setup? Different computer, different putty version etc?
If it worked with m0n0wall it should work with pfSense.Steve
-
nope i couldnt get it work using windows 7 so i went to a xp pc and wrote the files to the card, put th card back in and tried to use putty and nothing shows up!!
-
Well one of two things is happening here, assuming the firebox is working correctly:
1. The image is not writing to the card correctly.
2. Your serial cable setup is not working.
If the image doesn't write properly then physdiskwrite will show errors. Possibly the image was corrupted during download. Did you check the md5?
Have you proved your serial cable setup with something else? What do you mean by 'keyspan'?Steve
-
So i dont know what going on
-
I'm sure we can get this working, many other users have. :)
However in order to troubleshoot the problem you need to answer my questions as best you can.
If I'm asking you something you don't understand then please ask me to clarify it.Did you check the MD5 sum of the downloaded image file against the one provided?
Have you tested your serial cable setup successfully with any OS?
Steve
-
A keyspan is just a serial to usb adapter. And yes i i can use the same serial cable on a cisco device
-
Ah OK,
Next thing then is to check that your serial connection on the firebox is working.
Boot the firebox either to m0n0wall (if you are sure that is working) or with the original Watchguard OS. Both should provide output on the serial port, m0n0wall at 9600 and the Watchguard OS at 115200.
If you can see some output from either of those then the pfSense card is not booting for some reason.Steve
-
Looks like i dont have a copy of the WG os (moran me thought i did on the file server) is there anyway to get a couple? But m0nowall works. So there has to be something im doing wrong? Im new to this im use to using cisco firewall so trying out something new as a side project and would like to get it up LOL.
-
So when you boot m0n0wall you can see output on the serial console?
Steve
-
Yes i can se a output with monowall!!
-
Ok, so the serial connection is proven working.
In that case the box is not booting the CF card for some reason.
1. The image is not being correctly written to the card.
2. The card is somehow incompatible with the box.To confirm the card is compatible you can try writing the m0n0wall image to it.
Steve
-
What kind of card do you need to use?
-
I can hold down the down arrow on the FB and i get a menu it says boot failed? Any idea why im getting that?
-
steve,
You seem to be the only one trying to help me do you have pfsense running on a firebox? This is bugging the heck out of me, how monowall works and not pfsense!!!! :'(