Sarg package for pfsense

marcelloc

questions

I am Brazilian and I can not speak English so I'm translating it in google translator. I hope you understand and help me.

How do I set up the flap schedule? Can anyone give me an example?
My difficulty is the option Sarg ARGS
can anyone give me an example with a correct date, please?
Which option to use in Action after sarg?
After configuring the View Report tab work? For my gives error saying I need to set the flap schedule

kleyverson,

post without google on portuguese forum :)

Lá já tem um tópico para o sarg.

att,
Marcello Coutinho

gwhynott

Hi Marcello,

I logged into the pfsence box last week (the 15th) before heading out on vacation (how bad is that? not in the best practices guide anyway…) and noticed there was an update for SARG. I applied it.

I logged in again today to generate a SARG report on a site. I noticed SARG hasn't worked since the upgrade. Seems 'topuser_sort_field' is causing it some grief, (wondering if that was the modification you did when I suggested it as a feature add upon your release of the package...)..

has anyone else had this issue and/or is there anything you would like to see? I'll hold off on a re-install or touching anything till i hear back from you.

take care,
greg

May 15 10:46:52 gw-master php: /pkg_mgr_install.php: Beginning package installation for Sarg.
May 15 10:46:55 gw-master php: /pkg_mgr_install.php: [sarg] sarg_xmlrpc_sync.php is starting.
May 15 10:46:55 gw-master php: /pkg_mgr_install.php: [sarg] sarg_xmlrpc_sync.php is starting.
May 15 11:00:01 gw-master php: : Sarg: force refresh now with '' args and both action after sarg finish.
May 15 11:00:01 gw-master php: : The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Unknown sort criterion "NORMAL" for parameter "topuser_sort_field"'
May 15 11:00:01 gw-master php: : executing squid log rotate after sarg.
May 15 12:00:01 gw-master php: : Sarg: force refresh now with '' args and both action after sarg finish.
May 15 12:00:01 gw-master php: : The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Unknown sort criterion "NORMAL" for parameter "topuser_sort_field"'
May 15 12:00:01 gw-master php: : executing squid log rotate after sarg.

May 22 16:23:44 gw-master php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Unknown sort criterion "NORMAL" for parameter "topuser_sort_field"'
May 22 16:23:44 gw-master php: /pkg_edit.php: executing squid log rotate after sarg.
w with '' args and action after sarg finish.
Apr 24 21:00:00 gw-master php: : Sarg: force refresh now with '' args and action after sarg finish.
Apr 24 22:00:01 gw-master php: : Sarg: force refresh now with '' args and action after sarg finish.
Apr 24 23:00:00 gw-master php: : Sarg: force refresh now with '' args and action after sarg finish.

gwhynott

I noticed in the config file NORMAL isn't listed as an argument, just like the error said.

what do you think?

TAG: topuser_sort_field field normal/reverse

# Sort field for the Topuser Report.
# Allowed fields: USER CONNECT BYTES TIME

topuser_sort_field NORMAL

marcelloc

Did you tried to change user sort field on sarg gui?

gwhynott

@marcelloc:

Did you tried to change user sort field on sarg gui?

yes, doing that seemed to fix it.

thanks,
greg

klamath

after last update…
squid logs are in /var/squid/logs/access.log' not "/var/log/squid/access.log""
how to fix???

system logs:
php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: File not found: /var/log/squid/access.log'

Donny

after last update...
squid logs are in /var/squid/logs/access.log' not "/var/log/squid/access.log""
how to fix???

system logs:
php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: File not found: /var/log/squid/access.log'

me too the same error at system logs. The squid proxy also got error the line 1378 or 1387 (I am not sure which file name "Squid.conf" or "Squid.inf") after I made config at "General tab", when I click the save button.
SARG also no real time report at all.

marcelloc

Donny, did you tried to save config after package update?

the code has the correct folder but maybe the default config file of sarg 2.3.2 has /var/log/squid/access.log

$sarg_proxy=array(	'squid_rc'=>'/usr/local/etc/rc.d/squid.sh',
					'squid_config'=>'/var/squid/logs/access.log',
					'squidguard_config'=>'/usr/local/etc/squidGuard/squidGuard.conf',
					'squidguard_block_log'=>'/var/squidGuard/log/block.log',
					'dansguardian_config'=>'/usr/local/etc/dansguardian/dansguardian.conf',
					'dansguardian_log'=>'/var/log/dansguardian/access.log');

Donny

Donny, did you tried to save config after package update?

the code has the correct folder but maybe the default config file of sarg 2.3.2 has /var/log/squid/access.log

Hallo Marcelloc

First, I have clean install Squid3 and configured, then I click save and I got squid proxy error fatal the line 1378 or 1387 (I am not sure which number) on Chrome web browser and I also not sure which file name "Squid.conf" or "Squid_reverse.inf")
Second, I have clean install SARG last version and configured in General tab, User tab and Schedule tab, then save. When I click update button at Real time report, no real time report appear at all.
I also try to reboot pfsense many time after config Squid3 and SARG but the Real time report still not appear.
Anyway I will try to clean install pfSense and Squid3 and SARG again later.

Thank you
Donny

marcelloc

@Donny:

Anyway I will try to clean install pfSense and Squid3 and SARG again later.

Try sarg just after you get squid up and running.

I'll check this squid3 first run error as soon as possible.

att,
Marcello Coutinho

Donny

@marcelloc:

@Donny:

Anyway I will try to clean install pfSense and Squid3 and SARG again later.

Try sarg just after you get squid up and running.

I'll check this squid3 first run error as soon as possible.

att,
Marcello Coutinho

Hello Marcelloc

I will do and test it in this evening. I will make some screenshot also for some error.

Donny

Donny

Hello Marcelloc

I just clean install pfSense and basic configured. After that I have installed Squid3 last version.
In the Squid "general tab" I just only use some default setting. I enable "Enable logging and log rotate" and also changed the language to "en". So I click save.

I got fatal error on Chrome web browser like this:

"Fatal error: Cannot use string offset as an array in /usr/local/pkg/squid.inc on line 1378"

and at this point I enter Chrome web browser again I got: "Error: No packege defined".

then I enter pfSense Lan IP and went back to Squid general tab but not things save (Enable logging and log rotate and language "en"). I saw on dashboard that Squid is not running and then
I tried to configure squid on general tab again and the click save but at this time I don't get any fatal error.

I also checked at system log file and I saw some error like this:

php: /pkg_edit.php: The command '/usr/local/sbin/squid -k kill' returned exit code '1', the output was 'squid: ERROR: No running copy'

So you can see my screenshot.
I did not install SARG yet. Just only clean install pfsense and squid3

Thank u

Donny

![Squid fatal error.png](/public/imported_attachments/1/Squid fatal error.png)
![Squid fatal error.png_thumb](/public/imported_attachments/1/Squid fatal error.png_thumb)
![Squid Error No package defined.png](/public/imported_attachments/1/Squid Error No package defined.png)
![Squid Error No package defined.png_thumb](/public/imported_attachments/1/Squid Error No package defined.png_thumb)
![Squid syslog file.png](/public/imported_attachments/1/Squid syslog file.png)
![Squid syslog file.png_thumb](/public/imported_attachments/1/Squid syslog file.png_thumb)

marcelloc

Donny,

I've pushed a fix to this issue with no version change, on my tests it's working fine now.

wait 15 minutes, reinstall the package and try to configure it again.

att,
Marcello Coutinho

Donny

@marcelloc:

Donny,

I've pushed a fix to this issue with no version change, on my tests it's working fine now.

wait 15 minutes, reinstall the package and try to configure it again.

att,
Marcello Coutinho

Ok, I will try after 30 minutes.

Donny

I just clean install pfSense and basic configured. After that I have installed Squid3 last version. 
In the Squid "general tab" I just only use some default setting. I enable "Enable logging and log rotate" and also changed the language to "en". So I click save.

I got fatal error on Chrome web browser like this:

"Fatal error: Cannot use string offset as an array in /usr/local/pkg/squid.inc on line 1378"

and at this point I enter Chrome web browser again I got: "Error: No packege defined".

then I enter pfSense Lan IP and went back to Squid general tab but not things save (Enable logging and log rotate and language "en"). I saw on dashboard that Squid is not running  and then 
I tried to configure squid on general tab again and the click save but at this time I don't get any fatal error.

I also checked at system log file and I saw some error like this:

php: /pkg_edit.php: The command '/usr/local/sbin/squid -k kill' returned exit code '1', the output was 'squid: ERROR: No running copy'

So you can see my screenshot.
I did not install SARG yet. Just only clean install pfsense and squid3

Hello Marcello,

I just tried it and I got the same fatal error and the same result that I explain before.

This is second time to clean install pfSense and Squid. I did not try to reinstall squid package because I want to be sure that squid work without error.

Now in Holland is almost 1 AM in the morning, I am going to bed now.

Donny

marcelloc

I'll try to reproduce this error.

Try to refresh the page with f5 and save again.

klamath

Hi marcelloc

looks like sarg can't handle large entries on file /var/squidGuard/log/block.log

I don't want erase the file /var/squidGuard/log/block.log, could u help me?

php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Records in file: 27976, reading: 0.00%^MSARG: Records in file: 5000, reading: 17.87%^MSARG: Records in file: 10000, reading: 35.74%^MSARG: Records in file: 15000, reading: 53.62%^MSARG: Records in file: 20000, reading: 71.49%^MSARG: Records in file: 25000, reading: 89.36%^MSARG: Hour string too long in redirector log file /var/squidGuard/log/block.log SARG: Records in file: 27976, reading: 100.00%'

marcelloc

@klamath:

looks like sarg can't handle large entries on file /var/squidGuard/log/block.log
I don't want erase the file /var/squidGuard/log/block.log, could u help me?

try to split this log or use sarg args to limit log search.

@klamath:

Hour string too long in redirector log file /var/squidGuard/log/block.log SARG: Records in file: 27976, reading: 100.00%'

I understand this error as some format error on log file/line not a too many records errors.

klamath

Thanks!

I've set the User_report_limit to 300 and rotate squidguard block log…

It's work for a while... than stopped sudenly again!

php: /pkg_edit.php: The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Records in file: 86169, reading: 0.00%^MSARG: Records in file: 5000, reading: 5.80%^MSARG: Records in file: 10000, reading: 11.61%^MSARG: Records in file: 15000, reading: 17.41%^MSARG: Records in file: 20000, reading: 23.21%^MSARG: Records in file: 25000, reading: 29.01%^MSARG: Records in file: 30000, reading: 34.82%^MSARG: Records in file: 35000, reading: 40.62%^MSARG: Records in file: 40000, reading: 46.42%^MSARG: Records in file: 45000, reading: 52.22%^MSARG: Records in file: 50000, reading: 58.03%^MSARG: Records in file: 55000, reading: 63.83%^MSARG: Records in file: 60000, reading: 69.63%^MSARG: Records in file: 65000, reading: 75.43%^MSARG: Records in file: 70000, reading: 81.24%^MSARG: Records in file: 75000, reading: 87.04%^MSARG: Records in file: 80000, reading: 92.84%^MSARG: Records in file: 85000, reading: 98.64%^MSARG: Successful report generated on /usr/local/sarg-reports/29May2

expert_az

i did conf like you,http://forum.pfsense.org/index.php/topic,47765.165.html
its ok now ,thank you for great job

hello marcelloc,i got this error while testing sarg with squid and squidguard,and can't see reports on view report tab

Error: Could not find report index file.
Check and save sarg settings and try to force sarg schedule.

php: : The command '/usr/local/bin/sarg ' returned exit code '1', the output was 'SARG: Records in file: 72216, reading: 0.00%^MSARG: Records in file: 5000, reading: 6.92%^MSARG: Records in file: 10000, reading: 13.85%^MSARG: Records in file: 15000, reading: 20.77%^MSARG: Records in file: 20000, reading: 27.69%^MSARG: Records in file: 25000, reading: 34.62%^MSARG: Records in file: 30000, reading: 41.54%^MSARG: Records in file: 35000, reading: 48.47%^MSARG: Records in file: 40000, reading: 55.39%^MSARG: Records in file: 45000, reading: 62.31%^MSARG: Records in file: 50000, reading: 69.24%^MSARG: Records in file: 55000, reading: 76.16%^MSARG: Records in file: 60000, reading: 83.08%^MSARG: Records in file: 65000, reading: 90.01%^MSARG: Records in file: 70000, reading: 96.93%^MSARG: Cannot delete /usr/local/sarg-reports/2012/06/12/debakim.html - No such file or directory SARG: Records in file: 72216, reading: 100.00%'